The additional queues can enhance the performance of the VirtIO SCSI disk
and it is recommended to set this to the amount of vCPUs a Instance is assigned.
The optional queues attribute specifies the number of queues for the
controller. For best performance, it's recommended to specify a value matching
the number of vCPUs. Since 1.0.5 (QEMU and KVM only)
Source: https://libvirt.org/formatdomain.html#elementsVirtio
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* Allow KVM VM live migration with ROOT volume on file
* Allow KVM VM live migration with ROOT volume on file
- Add JUnit tests
* Address reviewers and change some variable names to ease future
implementation (developers can easily guess the name and use
autocomplete)
Added dummy and lo devices to be treated as a normal bridge slave devs.
Fixes#2998
Added two more device names (lo* and dummy*). Implemented tests. Code was refactored.
Improved paths concatenation code from "+" to Paths.get.
If a host has many routes this can be a magnitude faster then printing
all the routes and grepping for the default.
In some situations the host might have a large amount of routes due to
dynamic routing being used like OSPF or BGP.
In addition fix a couple of loglines which were throwing messages on
DEBUG while WARN and ERROR should be used there.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
When vxlan://untagged is used for public (or guest) network, use the
default public/guest bridge device same as how vlan://untagged works.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
These additional RBD features allow for faster lookups of how much space a RBD
image is using, but with the exclusive locking we prevent two VMs from writing
to the same RBD image at the same time.
These are the default features used by Ceph for any new RBD image.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
On actual testing, I could see that kvmheartbeat.sh script fails on NFS
server failure and stops the agent only. Any HA VMs could be launched
in different hosts, and recovery of NFS server could lead to a state
where a HA enabled VM runs on two hosts and can potentially cause
disk corruptions. In most cases, VM disk corruption will be worse than
VM downtime. I've kept the sleep interval between check/rounds but
reduced it to 10s. The change in behaviour was introduced in #2722.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Prevents errors while migrating VM from ISO:
Test 1: Deploy VM from ISO -> Live migrate VM to another host -> ERROR
Test 2: Register ISO using Direct Download on KVM -> Deploy VM from ISO -> Live migrate VM to another host -> ERROR
- Prevent NullPointerException migrating VM from ISO
- Prevent mount secondary storage on ISO direct downloads on KVM
Since we support only Ubuntu 16.04+ on master/4.12+, we can now use
the libvirt service name `libvirtd` for all distributions. This also
fixes an optional package name for libvirtd installation on Debian 9+.
Fixes#2909
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Windows has support for several paravirt features that it will use when running on Hyper-V, Microsoft's hypervisor. These features are called enlightenments. Many of the features are similar to paravirt functionality that exists with Linux on KVM (virtio, kvmclock, PV EOI, etc.)
Nowadays QEMU/KVM can also enable support for several Hyper-V enlightenments. When enabled, Windows VMs running on KVM will use many of the same paravirt optimizations they would use when running on Hyper-V.
A number of years ago, a PR was introduced that added a good portion of the code to enable this feature set, but it was never completed. This PR enables the existing features. The previous patch set detailed in #1013 also included the tests.
By selecting Windows PV, the enlightenment additions will be applied to the libvirt configuration. This is support on Windows Server 2008 and beyond, so all currently supported versions of Windows Server.
In our testing, we've seen benchmark improvements of around 20-25% running on Centos 7 hosts and it is also supported on Centos/RHEL 6.5 and later. Testing on Ubuntu would be appreciated.
When a Instance is (attempted to be) started in KVM Host the Agent
should not worry about the allocated memory on this host.
To make a proper judgement we need to take more into account:
- Memory Overcommit ratio
- Host reserved memory
- Host overcommit memory
The Management Server has all the information and the DeploymentPlanner
has to make the decision if a Instance should and can be started on a
Host, not the host itself.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
This fixes#2763 by moving a post cert-renewal class for kvm
plugin/hypervisor to src/main/java. The regression is due to change
in file-system layout due to maven standard refactoring on master and
issue was not caught during forward-merging of a PR from 4.11 branch.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Cleaup and code-formatting POM files
* Remove obsolete mycila license-maven-plugin
* Remove obsolete console-proxy/plugin project
* Move console-proxy-rdbconsole under console-proxy parent
* Use correct parent path for rdpconsole
* Order alphabetally items in setnextversion.sh
* Unifiy License header in POMs
* Alphabetic order of modules definition
* Extract all defined versions into parent pom
* Remove obsolete files: version-info.in, configure-info.in
* Remove redundant defaultGoal
* Remove useless checkstyle plugin from checkstyle project
* Order alphabetally items in pom.xml
* Add aditional SPACEs to fix debian build
* Don't execute checkstyle on parent projects
* Use UTF-8 encoding in building checkstyle project
* Extract plugin versions into properties
* Execute PMD plugin on all the projects with -Penablefindbugs
* Upgrade maven plugins to latest version
* Make sure to always look for apache parent pom from repository
* Fix incorrect version grep in debian packaging
* Fix rebase conflicts
* Fix rebase conflicts
* Remove PMD for now to be fixed on another PR
Fixes the version in pom etc. to be consistent with versioning pattern as X.Y.Z.0-SNAPSHOT after a minor release.
Signed-off-by: Khosrow Moossavi <khos2ow@gmail.com>
This ensure that fewer mount points are made on hosts for either
primary storagepools or secondary storagepools.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Now the KVM agent checks whether a storage pool is mounted or not mounted before calling storagePoolCreateXML().
Signed-off-by: Kai Takahashi <k-takahashi@creationline.com>
This introduces a new global setting `vm.configdrive.primarypool.enabled` to toggle creation/hosting of config drive iso files on primary storage, the default will be false causing them to be hosted on secondary storage. The current support is limited from hypervisor resource side and in current implementation limited to `KVM` only. The next big change is that config drive is created at a temporary location by management server and shipped to either KVM or SSVM agent via cmd-answer pattern, the data of which is not logged in logs. This saves us from adding genisoimage dependency on cloudstack-agent pkg.
The APIs to reset ssh public key, password and user-data (via update VM API) requires that VM should be shutdown. Therefore, in the refactoring I removed the case of updation of existing ISO. If there are objections I'll re-put the strategy to detach+attach new config iso as a way of updation. In the refactored implementation, the folder name is changed to lower-cased configdrive. And during VM start, migration or shutdown/removal if primary storage is enable for use, the KVM agent will handle cleanup tasks otherwise SSVM agent will handle them.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
In 4.11.0, I added the ability to online migrate volumes from NFS to managed storage. This actually works for Ceph to managed storage in a private 4.8 branch, as well. I thought I had brought along all of the necessary code from that private 4.8 branch to make Ceph to managed storage functional in 4.11.0, but missed one piece (which is fixed by this PR).
This adds and allows Ubuntu 18.04 to be used as KVM host. In addition,
on the UI when hypervisor version key is missing, this adds and display
the host os and version detail which is useful to show the KVM host
os and version.
When cache mode 'none' is used for empty cdrom drives, systemvms
and guest VMs fail to start on newer libvirtd such as Ubuntu bionic.
The fix is ensure that cachemode is not declared when drives are empty
upon starting of the VM. Similar issue logged at redhat here:
https://bugzilla.redhat.com/show_bug.cgi?id=1342999
The workaround is to ensure that we don't configure cachemode for
cdrom devices at all. This also fixes live VM migration issue.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
The three methods are named as "setXXX", actually, they are not simple setter or getter.
They are further renamed as "generateXXX" with dahn's comments.
* fix https://issues.apache.org/jira/browse/CLOUDSTACK-10356
* del patch file
* Update ResourceCountDaoImpl.java
* fix some format
* fix code
* fix error message in VolumeOrchestrator
* add check null stmt
* del import unuse class
* use BooleanUtils to check Boolean
* fix error message
* delete unuse function
* delete the deprecated function updateDomainCount
* add error log and throw exception in ProjectManagerImpl.java
This extends securing of KVM hosts to securing of libvirt on KVM
host as well for TLS enabled live VM migration. To simplify implementation
securing of host implies that both host and libvirtd processes are
secured with management server's CA plugin issued certificates.
Based on whether keystore and certificates files are available at
/etc/cloudstack/agent, the KVM agent determines whether to use TLS or
TCP based uris for live VM migration. It is also enforced that a secured
host will allow live VM migration to/from other secured host, and an
unsecured hosts will allow live VM migration to/from other unsecured
host only.
Post upgrade the KVM agent on startup will expose its security state
(secured detail is sent as true or false) to the managements server that
gets saved in host_details for the host. This host detail can be accesed
via the listHosts response, and in the UI unsecured KVM hosts will show
up with the host state of ‘unsecured’. Further, a button has been added
that allows admins to provision/renew certificates to KVM hosts and can
be used to secure any unsecured KVM host.
The `cloudstack-setup-agent` was modified to accept a new flag `-s`
which will reconfigure libvirtd with following settings:
listen_tcp=0
listen_tls=1
tcp_port="16509"
tls_port="16514"
auth_tcp="none"
auth_tls="none"
key_file = "/etc/pki/libvirt/private/serverkey.pem"
cert_file = "/etc/pki/libvirt/servercert.pem"
ca_file = "/etc/pki/CA/cacert.pem"
For a connected KVM host agent, when the certificate are
renewed/provisioned a background task is scheduled that waits until all
of the agent tasks finish after which libvirt process is restarted and
finally the agent is restarted via AgentShell.
There are no API or DB changes.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Several fixes addressed:
- Dettach ISO fails when trying to detach a direct download ISO
- Fix for metalink support on SSVM agents (this closes CLOUDSTACK-10238)
- Reinstall VM from bypassed registered template (this closes CLOUDSTACK-10250)
- Fix upload certificate error message even though operation was successful
- Fix metalink download, checksum retry logic and metalink SSVM downloader
There is a race condition in the monitoring of the migration process on KVM. If the monitor wakes up in the tight window after the migration succeeds, but before the migration thread terminates, the monitor will get a LibvirtException “Domain not found: no domain with matching uuid” when checking on the migration status. This in turn causes CloudStack to sync the VM state to stop, in which it issues a defensive StopCommand to ensure it is correctly synced.
Fix: Prevent LibvirtException: "Domain not found" caused by the call to dm.getInfo()
