Several fixes addressed:
- Dettach ISO fails when trying to detach a direct download ISO
- Fix for metalink support on SSVM agents (this closes CLOUDSTACK-10238)
- Reinstall VM from bypassed registered template (this closes CLOUDSTACK-10250)
- Fix upload certificate error message even though operation was successful
- Fix metalink download, checksum retry logic and metalink SSVM downloader
The new CA framework introduced basic support for comma-separated
list of management servers for agent, which makes an external LB
unnecessary.
This extends that feature to implement LB sorting algorithms that
sorts the management server list before they are sent to the agents.
This adds a central intelligence in the management server and adds
additional enhancements to Agent class to be algorithm aware and
have a background mechanism to check/fallback to preferred management
server (assumed as the first in the list). This is support for any
indirect agent such as the KVM, CPVM and SSVM agent, and would
provide support for management server host migration during upgrade
(when instead of in-place, new hosts are used to setup new mgmt server).
This FR introduces two new global settings:
- `indirect.agent.lb.algorithm`: The algorithm for the indirect agent LB.
- `indirect.agent.lb.check.interval`: The preferred host check interval
for the agent's background task that checks and switches to agent's
preferred host.
The indirect.agent.lb.algorithm supports following algorithm options:
- static: use the list as provided.
- roundrobin: evenly spreads hosts across management servers based on
host's id.
- shuffle: (pseudo) randomly sorts the list (not recommended for production).
Any changes to the global settings - `indirect.agent.lb.algorithm` and
`host` does not require restarting of the mangement server(s) and the
agents. A message bus based system dynamically reacts to change in these
global settings and propagates them to all connected agents.
Comma-separated management server list is propagated to agents on
following cases:
- Addition of a host (including ssvm, cpvm systevms).
- Connection or reconnection by the agents to a management server.
- After admin changes the 'host' and/or the
'indirect.agent.lb.algorithm' global settings.
On the agent side, the 'host' setting is saved in its properties file as:
`host=<comma separated addresses>@<algorithm name>`.
First the agent connects to the management server and sends its current
management server list, which is compared by the management server and
in case of failure a new/update list is sent for the agent to persist.
From the agent's perspective, the first address in the propagated list
will be considered the preferred host. A new background task can be
activated by configuring the `indirect.agent.lb.check.interval` which is
a cluster level global setting from CloudStack and admins can also
override this by configuring the 'host.lb.check.interval' in the
`agent.properties` file.
Every time agent gets a ms-host list and the algorithm, the host specific
background check interval is also sent and it dynamically reconfigures
the background task without need to restart agents.
Note: The 'static' and 'roundrobin' algorithms, strictly checks for the
order as expected by them, however, the 'shuffle' algorithm just checks
for content and not the order of the comma separate ms host addresses.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Refactored nuage tests
Added simulator support for ConfigDrive
Allow all nuage tests to run against simulator
Refactored nuage tests to remove code duplication
* Move test data from test_data.py to nuage_test_data.py
Nuage test data is now contained in nuage_test_data.py instead of
test_data.py
Removed all nuage test data from nuage_test_data.py
* CLOUD-1252 fixed cleanup of vpc tier network
* Import libVSD into the codebase
* CLOUDSTACK-1253: Volumes are not expunged in simulator
* Fixed some merge issues in test_nuage_vsp_mngd_subnets test
* Implement GetVolumeStatsCommand in Simulator
* Add vspk as marvin nuagevsp dependency, after removing libVSD dependency
* correct libVSD files for license purposes
pep8 pyflakes compliant
This would make keystore utility scripts being executed as sudoer
in case the process uid/owner is not root but still a sudoer user.
Also fails addHost while securing a KVM host and if keystore fails to be
setup for any reason.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
During deletion of role, set name to null. This fixes concurrent
exception issue where previously it would rename the deleted role
with a timestamp.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This fixes regression failures seen in Trillian, fixes NPEs that cause Travis related failures.
This also removes the aria2 dependency from rpms that require users to enable/install epel-release.
This finally updates the checksums for 4.11 systemvmtemplates in db upgrade path.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Allowed zone-wide primary storage based on a custom plug-in to be added via the GUI in a KVM-only environment (previously this only worked for XenServer and VMware)
Added support for root disks on managed storage with KVM
Added support for volume snapshots with managed storage on KVM
Enable creating a template directly from a volume (i.e. without having to go through a volume snapshot) on KVM with managed storage
Only allow the resizing of a volume for managed storage on KVM if the volume in question is either not attached to a VM or is attached to a VM in the Stopped state.
Included support for Reinstall VM on KVM with managed storage
Enabled offline migration on KVM from non-managed storage to managed storage and vice versa
Included support for online storage migration on KVM with managed storage (NFS and Ceph to managed storage)
Added support to download (extract) a managed-storage volume to a QCOW2 file
When uploading a file from outside of CloudStack to CloudStack, set the min and max IOPS, if applicable.
Included support for the KVM auto-convergence feature
The compression flag was actually added in version 1.0.3 (1000003) as opposed to version 1.3.0 (1003000) (changed this to reflect the correct version)
On KVM when using iSCSI-based managed storage, if the user shuts a VM down from the guest OS (as opposed to doing so from CloudStack), we need to pass to the KVM agent a list of applicable iSCSI volumes that need to be disconnected.
Added a new Global Setting: kvm.storage.live.migration.wait
For XenServer, added a check to enforce that only volumes from zone-wide managed storage can be storage motioned from a host in one cluster to a host in another cluster (cannot do so at the time being with volumes from cluster-scoped managed storage)
Don’t allow Storage XenMotion on a VM that has any managed-storage volume with one or more snapshots.
Enabled for managed storage with VMware: Template caching, create snapshot, delete snapshot, create volume from snapshot, and create template from snapshot
Added an SIOC API plug-in to support VMware SIOC
When starting a VM that uses managed storage in a cluster other than the one it last was running in, we need to remove the reference to the iSCSI volume from the original cluster.
Added the ability to revert a volume to a snapshot
Enabled cluster-scoped managed storage
Added support for VMware dynamic discovery
Extending Config Drive support
* Added support for VMware
* Build configdrive.iso on ssvm
* Added support for VPC and Isolated Networks
* Moved implementation to new Service Provider
* UI fix: add support for urlencoded userdata
* Add support for building systemvm behind a proxy
Co-Authored-By: Raf Smeets <raf.smeets@nuagenetworks.net>
Co-Authored-By: Frank Maximus <frank.maximus@nuagenetworks.net>
Co-Authored-By: Sigert Goeminne <sigert.goeminne@nuagenetworks.net>
During storage expunge domain resource statistics for primary storage space resource counter is not updated for domain. This leads to the situation when domain resource statistics for primary storage is overfilled (statistics only increase but not decrease).
Global scheduled task resourcecount.check.interval > 0 provides a workaround but not fixes the problem truly because when accounts inside domains use primary_storage allocation/deallocation intensively it leads to service block of operation.
NB: Unable to implement marvin tests because it (marvin) places in database weird primary storage volume size of 100 when creating VM from template. It might be a sign of opening a new issue for that bug.
CloudStack volumes and templates are one single virtual disk in case of XenServer/XCP and KVM hypervisors since the files used for templates and volumes are virtual disks (VHD, QCOW2). However, VMware volumes and templates are in OVA format, which are archives that can contain a complete VM including multiple VMDKs and other files such as ISOs. And currently, Cloudstack only supports Template creation based on OVA files containing a single disk. If a user creates a template from a OVA file containing more than 1 disk and launches an instance using this template, only the first disk is attached to the new instance and other disks are ignored.
Similarly with uploaded volumes, attaching an uploaded volume that contains multiple disks to a VM will result in only one VMDK to being attached to the VM.
FS: https://cwiki.apache.org/confluence/display/CLOUDSTACK/Support+OVA+files+containing+multiple+disks
This behavior needs to be improved in VMWare to support OVA files with multiple disks for both uploaded volumes and templates. i.e. If a user creates a template from a OVA file containing more than 1 disk and launches an instance using this template, the first disk should be attached to the new instance as the ROOT disk and volumes should be created based on other VMDK disks in the OVA file and should be attached to the instance.
Signed-off-by: Abhinandan Prateek <abhinandan.prateek@shapeblue.com>
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This fixes regression introduced in PR #2295:
- Pass assign=true to fetch new public IP
- Use wait_until instead of sleep+wait in tests
- Loop through list of public IP ranges to match the systemvm gateway
- Fix potential NPE seen when adding simulator host(s)
- Removes aria2 installation from setup_agent.sh using yum, it's already
dependency for cloudstack-agent package
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This PR introduces several features and fixes some bugs:
- account tags feature
- fixed resource tags bugs which happened during tags search (found wrong entries because of mysql string to number translation - see #905, but this PR does more and fixes also resource access - vulnerability during list resource tags)
- some marvin improvements (speed, sanity)
Improved resource tags code:
1. Enhanced listTags security
2. Added support for account tags (account tags are required to support tags common for all users of an account)
3. Improved the tag management code (refactoring and cleanup)
Marvin:
1. Fixed Marvin wait timeout between async pools. To decrease polling interval and improve CI speed.
2. Fixed /tmp/ to /tmp in zone configuration files.
3. Fixed + to os.path.join in log class.
4. Fixed + to os.path.join in deployDataCenter class.
5. Fixed typos in tag tests.
6. Modified Tags base class delete method.
Deploy Datacenter script:
1. Improved deployDatacenter. Added option logdir to specify where script places results of evaluation.
ConfigurationManagerImpl:
1. Added logging to ConfigurationManagerImpl to log when vlan is not found. Added test stubs for tags. Found accidental exception during simulator running after CI.
tests_tags.py:
1. Fixed stale undeleted tags.
2. Changed region:India to scope:TestName.
This can otherwise cause problems in Basic Networking where multiple
IPv4 ranges are configured in a POD.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
This feature allows using templates and ISOs avoiding secondary storage as intermediate cache on KVM. The virtual machine deployment process is enhanced to supported bypassed registered templates and ISOs, delegating the work of downloading them to primary storage to the KVM agent instead of the SSVM agent.
Template and ISO registration:
- When hypervisor is KVM, a checkbox is displayed with 'Direct Download' label.
- API methods registerTemplate and registerISO are both extended with this new parameter directdownload.
- On template or ISO registration, no download job is sent to SSVM agent, CloudStack would only persist an entry on template_store_ref indicating that template or ISO has been marked as 'Direct Download' (bypassing Secondary Storage). These entries are persisted as:
template_id = Template or ISO id on vm_template table
store_id NULL
download_state = BYPASSED
state = Ready
(Note: these entries allow users to deploy virtual machine from registered templates or ISOs)
- An URL validation command is sent to a random KVM host to check if template/ISO location can be reached. Metalink are also supported by this feature. In case of a metalink, it is fetched and URL check is performed on each of its URLs.
- Checksum should be provided as indicated on #2246: {ALGORITHM}CHKSUMHASH
- After template or ISO is registered, it would be displayed in the UI
Virtual machine deployment:
When a 'Direct Download' template is selected for deployment, CloudStack would delegate template downloading to destination storage pool via destination host by a new pluggable download manager.
Download manager would handle template downloading depending on URL protocol. In case of HTTP, request headers can be set by the user via vm_template_details. Those details should be persisted as:
Key: HTTP_HEADER
Value: HEADERNAME:HEADERVALUE
In case of HTTPS, a new API method is added uploadTemplateDirectDownloadCertificate to allow user importing a client certificate into all KVM hosts' keystore before deployment.
After template or ISO is downloaded to primary storage, usual entry would be persisted on template_spool_ref indicating the mapping between template/ISO and storage pool.
Steps to reproduce issue
Deploy a VM
Take snapshot of the root volume
Delete the snapshot
Before the garbage collector has run, shutdown the VM and assign the VM to other user.
When garage collector executes NPE shows in the logs.
This happens when the root disk size is overridden. The primary storage limit check should be performed based on overridden size instead of template size. Enabled root disk resize tests to run on simulator as well.
This feature allow admins to dedicate a range of public IP addresses to the SSVM and CPVM, such that they can be subject to specific external firewall rules. The option to dedicate a public IP range to the System VMs (SSVM & CPVM) is added to the createVlanIpRange API method and the UI.
Solution:
Global setting 'system.vm.public.ip.reservation.mode.strictness' is added to determine if the use of the system VM reservation is strict (when true) or preferred (false), false by default.
When a range has been dedicated to System VMs, CloudStack should apply IPs from that range to
the public interfaces of the CPVM and the SSVM depending on global setting's value:
If the global setting is set to false: then CloudStack will use any unused and unreserved public IP
addresses for system VMs only when the pool of reserved IPs has been exhausted
If the global setting is set to true: then CloudStack will fail to deploy the system VM when the pool
of reserved IPs has been exhausted, citing the lack of available IPs.
UI Changes
Under Infrastructure -> Zone -> Physical Network -> Public -> IP Ranges, button 'Account' label is refactored to 'Set reservation'.
When that button is clicked, dialog displayed is also refactored, including a new checkbox 'System VMs' which indicates if range should be dedicated for CPVM and SSVM, and a note indicating its usage.
When clicking on button for any created range, UI dialog displayed indicates whether IP range is dedicated for system vms or not.
The first PR(#1176) intended to solve #CLOUDSTACK-9025 was only tackling the problem for CloudStack deployments that use single hypervisor types (restricted to XenServer). Additionally, the lack of information regarding that solution (poor documentation, test cases and description in PRs and Jira ticket) led the code to be removed in #1124 after a long discussion and analysis in #1056. That piece of code seemed logicless (and it was!). It would receive a hostId and then change that hostId for other hostId of the zone without doing any check; it was not even checking the hypervisor and storage in which the host was plugged into.
The problem reported in #CLOUDSTACK-9025 is caused by partial snapshots that are taken in XenServer. This means, we do not take a complete snapshot, but a partial one that contains only the modified data. This requires rebuilding the VHD hierarchy when creating a template out of the snapshot. The point is that the first hostId received is not a hostId, but a system VM ID(SSVM). That is why the code in #1176 fixed the problem for some deployment scenarios, but would cause problems for scenarios where we have multiple hypervisors in the same zone. We need to execute the creation of the VHD that represents the template in the hypervisor, so the VHD chain can be built using the parent links.
This commit changes the method com.cloud.hypervisor.XenServerGuru.getCommandHostDelegation(long, Command). From now on we replace the hostId that is intended to execute the “copy command” that will create the VHD of the template according to some conditions that were already in place. The idea is that starting with XenServer 6.2.0 hotFix ESP1004 we need to execute the command in the hypervisor host and not from the SSVM. Moreover, the method was improved making it readable and understandable; it was also created test cases assuring that from XenServer 6.2.0 hotFix ESP1004 and upward versions we change the hostId that will be used to execute the “copy command”.
Furthermore, we are not selecting a random host from a zone anymore. A new method was introduced in the HostDao called “findHostConnectedToSnapshotStoragePoolToExecuteCommand”, using this method we look for a host that is in the cluster that is using the storage pool where the volume from which the Snaphost is taken of. By doing this, we guarantee that the host that is connected to the primary storage where all of the snapshots parent VHDs are stored is used to create the template.
Consider using Disabled hosts when no Enabled hosts are found
This also closes#2317
Fix for CLOUDSTACK-7931 enforces a valid integer value to be configured for integration.api.port and usage.sanity.check.interval. These global configs can't be reset back to null(default).
While creating the response object for the 'listDomain' API, several database calls are triggered to fetch details like parent domain, project limit, IP limit, etc. These database calls are triggered for each record found in the main fetch query, which is causing the response to slow down.
Fix:
The database transactions are reduced to improve response of the Listdomain API
This extends work presented on #2048 on which the ability to extend the management range is provided.
Aim
This PR allows separating the management network subnet on which SSVM and CPVM are from the virtual routers management subnet.
Detailed use case
PCI compliance requires that network elements are defined as ‘in scope’ or ‘out of scope’, for compliance purposes. The SSVM and CPVM are both in scope as they allow public HTTP or HTTPS connections. The virtual routers have been defined as out of scope as they have been placed entirely in a firewalled network's segment. However, all of the system VM types share management network. As SSVM and CPVM are both in scope this would bring the virtual routers into scope as well, requiring individual audits of every virtual router. As this is not practical, the ‘management network’ which the SSVM and CPVM are on, and the management network which the virtual routers are on, must be separated by a firewall.
Description
By this feature it is possible to dedicate a created range for SSVM and CPVM (system vms) and provide a VLAN ID for its range.
A new boolean global configuration is added: system.vm.management.ip.reservation.mode.strictness. If enabled, the use of System VMs management IP reservation is strict, preferred if not. Default value is false (preferred).
Strict reservation: System VMs should try to get a private IP from a range marked for system vms. If not available, deployment fails
Preferred reservation: System VMS will try to get a private IP from a range marked for system vms. If not available, IP for range not marked for system vms is taken.
The db queries in listTemplateAPI could be optimized to get unique results from the database which could help in reducing the listTemplate API response time.
In CLOUDSTACK-9886, we are reading ping.interval and ping.timeout using configdao which involves direct reading of DB. So, replaced it with ConfigKey based approach.
Snapshot on primary storage not cleaned up after Storage migration. This happens in the following scenario:
Steps To Reproduce
Create an instance on the local storage on any host
Create a scheduled snapshot of the volume:
Wait until ACS created the snapshot. ACS is creating a snapshot on local storage and is transferring this snapshot to secondary storage. But the latest snapshot on local storage will stay there. This is as expected.
Migrate the instance to another XenServer host with ACS UI and Storage Live Migration
The Snapshot on the old host on local storage will not be cleaned up and is staying on local storage. So local storage will fill up with unneeded snapshots.
Using cloudmonkey, when invoking the update template api call, it does not display the isdynamicallyscalable field as part of its template response.
fix done:
org.apache.cloudstack.api.response.TemplateResponse isdynamicallyscalable field is now populated in the server/src/com/cloud/api/query/dao/TemplateJoinDaoImpl.java.newUpdateResponse method.
Unit test:
the Unit test server/test/com/cloud/api/query/dao/TemplateJoinDaoImplTest.java testNewUpdateResponse() verifies that the TemplateResponse is populated correctly.
Marvin test:
the Marvin nosetest integration/smoke/test_templates.py test_02_edit_template(self) confirms that the template_response.isdynamicallyscalable field gets populated with the correct user data.
Test scenario:
Using cloudmonkey, when invoking the 'update template' API call, it should now display the isdynamicallyscalable field as part of its template response.
Consider this scenario:
1. User launches a VM from Template and keep it running
2. Admin logins and deleted that template [CloudPlatform does not check existing / running VM etc. while the deletion is done]
3. User resets the VM
4. CloudPlatform fails to star the VM as it cannot find the corresponding template.
It throws error as
java.lang.RuntimeException: Job failed due to exception Resource [Host:11] is unreachable: Host 11: Unable to start instance due to can't find ready template: 209 for data center 1
at com.cloud.vm.VmWorkJobDispatcher.runJob(VmWorkJobDispatcher.java:113)
at org.apache.cloudstack.framework.jobs.impl.AsyncJobManagerImpl$5.runInContext(AsyncJobManagerImpl.java:495)
Client is requesting better handing of this scenario. We need to check existing / running VM's when the template is deleted and warn admin about the possible issue that may occur.
REPRO STEPS
==================
1. Launches a VM from Template and keep it running
2. Now delete that template
3. Reset the VM
4. CloudPlatform fails to star the VM as it cannot find the corresponding template.
EXPECTED BEHAVIOR
==================
Cloud platform should throw some warning message while the template is deleted if that template is being used by existing / running VM's
ACTUAL BEHAVIOR
==================
Cloud platform does not throw as waring etc.
* Cleanup and Improve NetUtils
This class had many unused methods, inconsistent names and redundant code.
This commit cleans up code, renames a few methods and constants.
The global/account setting 'api.allowed.source.cidr.list' is set
to 0.0.0.0/0,::/0 by default preserve the current behavior and thus
allow API calls for accounts from all IPv4 and IPv6 subnets.
Users can set it to a comma-separated list of IPv4/IPv6 subnets to
restrict API calls for Admin accounts to certain parts of their network(s).
This is to improve Security. Should an attacker steal the Access/Secret key
of an account he/she still needs to be in a subnet from where accounts are
allowed to perform API calls.
This is a good security measure for APIs which are connected to the public internet.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Ran into an issue today where we passed both the "id" and "domainid" parameters into "listAccounts" and received a response despite the account id passed not belonging to the domainid passed.
Allow usage of "domainid" AND "id" in "listAccounts"
- Adding "AccountDoa::findActiveAccountById"
- Adding "AccountDaoImpl::findActiveAccountById"
- Removing seemingly pointless "listForDomain" parameter
- Updating "typeNEQ" value from "5" to "Account.ACCOUNT_TYPE_PROJECT"
(which is "5")
- Only attempt to load domain for "path" query parameter once
"searchForAccountsInternal" input validation logic pseudo-code:
- If "domainid" set, check immediately
- If "id" not set:
- and user is admin and "listall" is true
- if "domainid" not set, use caller domain id
- force "isrecursive" true
- else use caller account id
- Else if "domainid" and "name" set
- verify existence of account and that user has access
- Else:
- if "domainid" not set, locate account by "id"
- else, locate account by "id" and "domainid"
- verify account found and caller has access rights
createSnapshotPolicy API create multiple entries in DB for same parameters, if multiple threads are executed in parallel.
STEPS TO REPRODUCE :
Created a new machine having root and data disk.
Make sure that no existing snapshot policy is present for the volume.
Execute multiple threads in parallel for createSnapshotPolicy API having all required parameters exactly same.
Verify table snapshot_policy in DB, will get multiple entries for same policy.
Once again execute same multiple threads, by changing any API parameter, will see that existing entries are getting modified in DB and no new entries are added.
Add resource type name in request and response for listResources API call.
This adds in the response a new attribute typename with the String value for the corresponding resource enum.
{
"capacitytotal": 0,
"capacityused": 0,
"percentused": "0",
"type": 19,
"typename": "gpu",
"zoneid": "381d0a95-ed4a-4ad9-b41c-b97073c1a433",
"zonename": "ch-dk-2"
}
Signed-off-by: Marc-Aurèle Brothier <m@brothier.org>
Python base64 requires that the string is a multiple of 4 characters but
the Apache codec does not. RFC states is not mandatory so the data should
not fail the VR script (vmdata.py).
Signed-off-by: Marc-Aurèle Brothier <m@brothier.org>
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This PR fixes the issue in which there's a leak when doing API call for listing VPC with domain account and projectId=-1.
Note for reviewers: The code formatting changed so many lines in the commit but the actual change is in line 2467-2471.
This fixes the issue that a non-root user cannot tag a network ACL item
and after the fix a non-root user still cannot tag a globally defined
ACL item and only the ACLs they have access to.
This includes test related fixes and code review fixes based on
reviews from @rafaelweingartner, @marcaurele, @wido and @DaanHoogland.
This also includes VMware disk-resize limitation bug fix based on comments
from @sateesh-chodapuneedi and @priyankparihar.
This also includes the final changes to systemvmtemplate and fixes to
code based on issues found via test failures.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
In a VMware 55u3 environment it was found that CPVM and SSVM would
get the same public IP. After another investigative review of
fetchNewPublicIp method, it was found that it would always pick up the
first IP from the sql query list/result.
The cause was found to be that with the new changes no table/row locks
are done and first item is used without looping through the list of
available free IPs. The previously implementation method that put
IP address in allocating state did not check that it was a free IP.
In this refactoring/fix, the first free IP is first marked as allocating
and if assign is requested that is changed into Allocated state.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This fixes incorrect total host memory in listHosts and related host
responses, regression introduced in #2120.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This fixes test failures around VMware with the new systemvmtemplate.
In addition:
- Does not skip rVR related test cases for VMware
- Removes rc.local
- Processes unprocessed cmd_line.json
- Fixed NPEs around VMware tests/code
- On VMware, use udevadm to reconfigure nic/mac address than rebooting
- Fix proper acpi shutdown script for faster systemvm shutdowns
- Give at least 256MB of swap for VRs to avoid OOM on VMware
- Fixes smoke tests for environment related failures
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
On XenServer, both redundant router's vifs were getting deleted when any
PF rule is removed from any of the acquired public IPs. This fix
ensures that lastIp is set to `false` when processed by hypervisor
resources to avoid removing of VIFs when VPCs have any source nat IP.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Several systemvmtemplate optimizations
- Uses new macchinina template for running smoke tests
- Switch to latest Debian 9.3.0 release for systemvmtemplate
- Introduce a new `get_test_template` that uses tiny test template
such as macchinina as defined test_data.py
- rVR related fixes and improvements
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
