* 4.7:
CLOUDSTACK-9154 - Sets the pub interface down when all guest nets are gone
CLOUDSTACK-9187 - Makes code ready for more something like ethXXXX, if we ever get that far
CLOUDSTACK-9188 - Reads network GC interval and wait from configDao
CLOUDSTACK-9187 - Fixes interface allocation to VRRP instances
CLOUDSTACK-9187 - Adds test to cover multiple nics and nic removal
CLOUDSTACK-9154 - Adds test to cover nics state after GC
CLOUDSTACK-9154 - Returns the guest iterface that is marked as added
Conflicts:
engine/orchestration/src/org/apache/cloudstack/engine/orchestration/NetworkOrchestrator.java
[4.7] Critical VPCVR issues fixed: CLOUDSTACK-9154; CLOUDSTACK-9187; and CLOUDSTACK-9188This PR applies the same fixes as in the PR #1259, but against branch 4.7.
Please refer to PR #1259 for the tests results and all the comments already made there.
Issues fixed are:
* CLOUDSTACK-9154: rVPC doesn't recover from cleaning up of network garbage collector
* CLOUDSTACK-9187: rVPC routers in Master/Master due to concurrency problem when writing the keepalivd.conf
* CLOUDSTACK-9188: NetworkGarbageCollector is not using gc.interval and gc.wait from settings
Those changes have been covered by 2 new tests added to ```smoke/test_vpc_redundant.py```:
* test_04_rvpc_network_garbage_collector_nics
* test_05_rvpc_multi_tiers
The test ```test_04_rvpc_network_garbage_collector_nics``` depends on the global settings for the network.gc.interval and gc.wait. If one wants the test to run quicker, please change the settings (default is 600 seconds for each) and restart the Management Server before running the tests. I would suggest to set it to 60 seconds.
In addition, the NetworkGarbageCollector was redefining the settings above mentioned and not reading their values through ConfigDao. Due to that, the settings were not being applied properly and the test was waiting to long to check the VPC routers.
* pr/1277:
CLOUDSTACK-9154 - Sets the pub interface down when all guest nets are gone
CLOUDSTACK-9187 - Makes code ready for more something like ethXXXX, if we ever get that far
CLOUDSTACK-9188 - Reads network GC interval and wait from configDao
CLOUDSTACK-9187 - Fixes interface allocation to VRRP instances
CLOUDSTACK-9187 - Adds test to cover multiple nics and nic removal
CLOUDSTACK-9154 - Adds test to cover nics state after GC
CLOUDSTACK-9154 - Returns the guest iterface that is marked as added
Signed-off-by: Remi Bergsma <github@remi.nl>
CLOUDSTACK-9001: Modifying snapshot results validation Currently snapshots results validation is based on length of snapshot result but if snapshot creation fails then None type object will not have "len" attribute hence modifying the validation.
* pr/994:
CLOUDSTACK-9001: Modifying snapshot results validation in testpath_uuid_event testpath
Signed-off-by: Remi Bergsma <github@remi.nl>
CLOUDSTACK-9005: Modifying tearDown functionModifying tearDown function to check if data volume is in detached state before deleting the volume
* pr/1000:
CLOUDSTACK-9005: Modifying tearDown function
Signed-off-by: Remi Bergsma <github@remi.nl>
* 4.7:
CLOUDSTACK-9222 Prevent cloud.log.1 filling up the disk
Add integration test for restartVPC with cleanup, and Private Gateway enabled.
Nullpointer Exception in NicProfileHelperImpl
NicProfileHelperImpl NullpointerException when ipVO is nullWhen a VPC has a private gateway, and one would like to restart the VPC with **cleanup** it would fail.
This PR adds a NullPointer check and verifies it with an integration test.
```
test_01_vpc_privategw_acl (integration.smoke.test_privategw_acl.TestPrivateGwACL) ... === TestName: test_01_vpc_privategw_acl | Status : SUCCESS ===
ok
test_02_vpc_privategw_static_routes (integration.smoke.test_privategw_acl.TestPrivateGwACL) ... === TestName: test_02_vpc_privategw_static_routes | Status : SUCCESS ===
ok
test_03_vpc_privategw_restart_vpc_cleanup (integration.smoke.test_privategw_acl.TestPrivateGwACL) ... === TestName: test_03_vpc_privategw_restart_vpc_cleanup | Status : SUCCESS ===
ok
test_04_rvpc_privategw_static_routes (integration.smoke.test_privategw_acl.TestPrivateGwACL) ... === TestName: test_04_rvpc_privategw_static_routes | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 4 tests in 2945.055s
OK
```
* pr/1328:
Add integration test for restartVPC with cleanup, and Private Gateway enabled.
Nullpointer Exception in NicProfileHelperImpl
Signed-off-by: Remi Bergsma <github@remi.nl>
* 4.7:
Fix unable to setup more than one Site2Site VPN Connection
FIX S2S VPN rVPC: Check only redundant routers in state MASTER
PEP8 of integration/smoke/test_vpc_vpn
Add S2S VPN test for Redundant VPC
Make integration/smoke/test_vpc_vpn Hypervisor independant
FIX VPN: non-working ipsec commands
[UI] MADNESS
[DB] Add force_encap field to s2s_customer_gateway table
[ROUTER] Add forceencaps field to python router ipsec config method
[TEST] unittest needs rework
[MARVIN] Add forceencap field to VpnCustomerGateway class in marvin base
[CORE] Add Force UDP Encapsulation option to Site2Site VPN
CLOUDSTACK-9186: Root admin cannot see VPC created by Domain admin user
CLOUDSTACK-9192: UpdateVpnCustomerGateway is failing
CLOUDSTACK-6485 prevent ip asignment of private gw iface
CLOUDSTACK-9204 Do not error when staticroute is already gone
make both check lines consistent
CLOUDSTACK-9181 Prevent syntax error in checkrouter.sh
CLOUDSTACK-9202 Bump ssh timeout
- Refactors the set_backup, set_master and set_fault methods to have better names for the variable
- Increase the sleep on the test in order to wait for the routers to be ready. It's now 3 times the GC settings
CLOUDSTACK-9123 - As a Developer I want the test_internal_lb.py to work with multiple hypervisorsThis PR make the test_internal_lb.py work with other Hypervisors types.
- Get hypervisor information from testClient.getHypervisorInfo()
- Adds XenServer, HyperV and VMware hypervisors
- Makes sure the OS type is "Other PV (64-bit)"
* pr/1204:
CLOUDSTACK-9123 - Make test compliant with multiple hypervisors
Signed-off-by: Remi Bergsma <github@remi.nl>
* 4.6:
CLOUDSTACK-9106 - Makes Enum name compliant with Java code conventions.
CLOUDSTACK-9106 - Adds a test to cover the changes in the applyVpnUsers() method
CLOUDSTACK-9106 - Makes the router commands call more consistent.
CLOUDSTACK-9106 - Enables private gateway tests on Redundant VPCs
CLOUDSTACK-9106 - Refactor the createPrivateNicProfileForGateway() method
CLOUDSTACK-9106 - Reduces the amount of iterations through the routers of a VPC
Add support for not (re)starting server after cloud-setup-management.
Closed PRs that will not be considered for merge:
This closes#1158
This closes#1097
Prevent live-lock in NSX API clientThe NSX api client relies on a sequence of responses to identify the need to authenticate and to follow redirects. In order to avoid live-locks, the NSX API client has a counter that will abort the execution after 5 consecutive requests that do not produce a Success (200) response.
When a NSX controller enters a faulty state it can allow authentication requests but deny any other API call. In such cases the NSX API client will consider the denied request a reason to follow a redirect and will enter into a live-lock (because the actual redirection is not happening).
This PR changes the NSX API client to no reset it's counter on a Success response from an authentication request. That is, the counter is only reset if another type of API call yields a Success response.
In addition, this PR also:
* changes the configuration of the license-maven-plugin to ignore files generated by pmd
* moves the NSX marvin test to a plugins folder
* refactors the NSX marvin test to reduce duplication
* adds an extra test case to the NSX marvin test that checks that NSX tunnels are properly created
* pr/1178:
Test NSX tunnel in guest network
Refactor test cases to reduce duplication
Use logger to print debug messages during test
Move NSX integrationt test to new plugins folder
Ignore pmd generated files during license check
Fix NSX rest client to not reset execution counter after a login
Add test for NSX plugin that simulates a live lock
Signed-off-by: Remi Bergsma <github@remi.nl>
Quota service while allowing for scalability will make sure that the cloud is
not exploited by attacks, careless use and program errors. To address this
problem, we propose to employ a quota-enforcement service that allows resource
usage within certain bounds as defined by policies and available quotas for
various entities. Quota service extends the functionality of usage server to
provide a measurement for the resources used by the accounts and domains using a
common unit referred to as cloud currency in this document. It can be configured
to ensure that your usage won’t exceed the budget allocated to accounts/domain
in cloud currency. It will let user know how much of the cloud resources he is
using. It will help the cloud admins, if they want, to ensure that a user does
not go beyond his allocated quota. Per usage cycle if a account is found to be
exceeding its quota then it is locked. Locking an account means that it will not
be able to initiat e a new resource allocation request, whether it is more
storage or an additional ip. Needless to say quota service as well as any action
on the account is configurable.
Changes from Github code review:
- Added marvin test for quota plugin API
- removed unused commented code
- debug messages in debug enabled check
- checks for nulls, fixed access to member variables and feature
- changes based on PR comments
- unit tests for UsageTypes
- unit tests for all Cmd classes
- unit tests for all service and manager impls
- try-catch-finally or try-with-resource in dao impls for failsafe db switching
- remove dead code
- add missing quota calculation case (regression fixed)
- replace tabs with spaces in pom.xmls
- quota: though default value for quota_calculated is 0, the usage server
makes it null while entering usage entries. Flipping the condition so
as to acocunt for that.
- quotatypes: fix NPE in quota type
- quota framework test fixes
- made statement period configurable
- changed default email templates to reflect the fact that exhausted quota may not result in a locked account
- added quotaUpdateCmd that refreshes quota balances and sends alerts and statements
- report quotaSummary command returns quota balance, quota usage and state for all account
- made UI framework changes to allow for text area input in edit views
- process usage entries that have greater than 0 usage
- orocess quota entries only if tariff is non zero
- if there are credit entries but no balance entry create a dummy balance entry
- remove any credit entries that are before the last balance entry
when displaying balance statement
- on a rerun the last balance is now getting added
FS: https://cwiki.apache.org/confluence/display/CLOUDSTACK/Quota+Service+-+FS
PR: https://github.com/apache/cloudstack/pull/768
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* 4.6:
CLOUDSTACK-9075 - Uses the same vlan since it should have been already released
CLOUDSTACK-9075 - Adds VPC static routes test
CLOUDSTACK-9075 - Covers Private GW ACL with Redundant VPCs
CLOUDSTACK-9075 - Add method to get list of Physical Networks per zone
CLOUDSTACK-6276 Removing unused parameter in integration test for projects
CLOUDSTACK-6276 Removing unused parameter in integration test
CLOUDSTACK-6276 Fixing affinity groups for projects
CLOUDSTACK-6276 Fixing affinity groups for projectsWith some contributions from @resmo and @ustcweizhou.
This closes https://github.com/apache/cloudstack/pull/508
To test manually (need at least 2 hosts):
Create a project
Create an affinity group in that project
Deploy a vm with that affinity group
Deploy a second vm with that affinity group
They should be on different hosts
Ran old and new tests for affinity groups on the simulator
Test create affinity group as admin in project ... === TestName: test_01_admin_create_aff_grp_for_project | Status : SUCCESS ===
ok
Test create affinity group as domain admin for projects ... === TestName: test_02_doadmin_create_aff_grp_for_project | Status : SUCCESS ===
ok
Test create affinity group as user for projects ... === TestName: test_03_user_create_aff_grp_for_project | Status : SUCCESS ===
ok
Test create affinity group that exists (same name) for projects ... === TestName: test_4_user_create_aff_grp_existing_name_for_project | Status : SUCCESS ===
ok
#Delete Affinity Group by id. ... === TestName: test_01_delete_aff_grp_by_id | Status : SUCCESS ===
ok
#Delete Affinity Group by id should fail for user not in project ... === TestName: test_02_delete_aff_grp_by_id_another_user | Status : SUCCESS ===
ok
test DeployVM in anti-affinity groups ... === TestName: test_01_deploy_vm_anti_affinity_group | Status : SUCCESS ===
ok
test DeployVM in anti-affinity groups with more vms than hosts. ... === TestName: test_02_deploy_vm_anti_affinity_group_fail_on_not_enough_hosts | Status : SUCCESS ===
ok
List affinity group for a vm for projects ... === TestName: test_01_list_aff_grps_for_vm | Status : SUCCESS ===
ok
List multiple affinity groups associated with a vm for projects ... === TestName: test_02_list_multiple_aff_grps_for_vm | Status : SUCCESS ===
ok
List affinity groups by id for projects ... === TestName: test_03_list_aff_grps_by_id | Status : SUCCESS ===
ok
List Affinity Groups by name for projects ... === TestName: test_04_list_aff_grps_by_name | Status : SUCCESS ===
ok
List Affinity Groups by non-existing id for projects ... === TestName: test_05_list_aff_grps_by_non_existing_id | Status : SUCCESS ===
ok
List Affinity Groups by non-existing name for projects ... === TestName: test_06_list_aff_grps_by_non_existing_name | Status : SUCCESS ===
ok
List affinity group should list all for a vms associated with that group for projects ... === TestName: test_07_list_all_vms_in_aff_grp | Status : SUCCESS ===
ok
Update the list of affinityGroups by using affinity groupids ... === TestName: test_01_update_aff_grp_by_ids | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 16 tests in 581.706s
OK
Deploy vm as Admin in Affinity Group belonging to regular user (should fail) ... === TestName: test_01_deploy_vm_another_user | Status : SUCCESS ===
ok
Create Affinity Group as admin for regular user ... === TestName: test_02_create_aff_grp_user | Status : SUCCESS ===
ok
List Affinity Groups as admin for all the users ... === TestName: test_03_list_aff_grp_all_users | Status : SUCCESS ===
ok
List Affinity Groups belonging to admin user ... === TestName: test_04_list_all_admin_aff_grp | Status : SUCCESS ===
ok
List Affinity Groups belonging to regular user passing account id and domain id ... === TestName: test_05_list_all_users_aff_grp | Status : SUCCESS ===
ok
List Affinity Groups belonging to regular user passing group id ... === TestName: test_06_list_all_users_aff_grp_by_id | Status : SUCCESS ===
ok
Delete Affinity Group belonging to regular user ... === TestName: test_07_delete_aff_grp_of_other_user | Status : SUCCESS ===
ok
Test create affinity group as admin ... === TestName: test_01_admin_create_aff_grp | Status : SUCCESS ===
ok
Test create affinity group as domain admin ... === TestName: test_02_doadmin_create_aff_grp | Status : SUCCESS ===
ok
Test create affinity group as user ... === TestName: test_03_user_create_aff_grp | Status : SUCCESS ===
ok
Test create affinity group that exists (same name) ... === TestName: test_04_user_create_aff_grp_existing_name | Status : SUCCESS ===
ok
Test create affinity group with existing name but within different account ... === TestName: test_05_create_aff_grp_same_name_diff_acc | Status : SUCCESS ===
ok
Test create affinity group of non-existing type ... === TestName: test_06_create_aff_grp_nonexisting_type | Status : SUCCESS ===
ok
Delete Affinity Group by name ... === TestName: test_01_delete_aff_grp_by_name | Status : SUCCESS ===
ok
Delete Affinity Group as admin for an account ... === TestName: test_02_delete_aff_grp_for_acc | Status : SUCCESS ===
ok
Delete Affinity Group which has vms in it ... === TestName: test_03_delete_aff_grp_with_vms | Status : SUCCESS ===
ok
Delete Affinity Group with id which does not belong to this user ... === TestName: test_05_delete_aff_grp_id | Status : SUCCESS ===
ok
Delete Affinity Group by name which does not belong to this user ... === TestName: test_06_delete_aff_grp_name | Status : SUCCESS ===
ok
Delete Affinity Group by id. ... === TestName: test_08_delete_aff_grp_by_id | Status : SUCCESS ===
ok
Root admin should be able to delete affinity group of other users ... === TestName: test_09_delete_aff_grp_root_admin | Status : SUCCESS ===
ok
Deploy VM without affinity group ... === TestName: test_01_deploy_vm_without_aff_grp | Status : SUCCESS ===
ok
Deploy VM by aff grp name ... === TestName: test_02_deploy_vm_by_aff_grp_name | Status : SUCCESS ===
ok
Deploy VM by aff grp id ... === TestName: test_03_deploy_vm_by_aff_grp_id | Status : SUCCESS ===
ok
test DeployVM in anti-affinity groups ... === TestName: test_04_deploy_vm_anti_affinity_group | Status : SUCCESS ===
ok
Deploy vms by affinity group id ... === TestName: test_05_deploy_vm_by_id | Status : SUCCESS ===
ok
Deploy vm in affinity group of another user by name ... === TestName: test_06_deploy_vm_aff_grp_of_other_user_by_name | Status : SUCCESS ===
ok
Deploy vm in affinity group of another user by id ... === TestName: test_07_deploy_vm_aff_grp_of_other_user_by_id | Status : SUCCESS ===
ok
Deploy vm in multiple affinity groups ... === TestName: test_08_deploy_vm_multiple_aff_grps | Status : SUCCESS ===
ok
Deploy multiple vms in multiple affinity groups ... === TestName: test_09_deploy_vm_multiple_aff_grps | Status : SUCCESS ===
ok
Deploy VM by aff grp name and id ... === TestName: test_10_deploy_vm_by_aff_grp_name_and_id | Status : SUCCESS ===
ok
List affinity group for a vm ... === TestName: test_01_list_aff_grps_for_vm | Status : SUCCESS ===
ok
List multiple affinity groups associated with a vm ... === TestName: test_02_list_multiple_aff_grps_for_vm | Status : SUCCESS ===
ok
List affinity groups by id ... === TestName: test_03_list_aff_grps_by_id | Status : SUCCESS ===
ok
List Affinity Groups by name ... === TestName: test_04_list_aff_grps_by_name | Status : SUCCESS ===
ok
List Affinity Groups by non-existing id ... === TestName: test_05_list_aff_grps_by_non_existing_id | Status : SUCCESS ===
ok
List Affinity Groups by non-existing name ... === TestName: test_06_list_aff_grps_by_non_existing_name | Status : SUCCESS ===
ok
List affinity group should list all for a vms associated with that group ... === TestName: test_07_list_all_vms_in_aff_grp | Status : SUCCESS ===
ok
Update the list of affinityGroups by using affinity groupids ... === TestName: test_01_update_aff_grp_by_ids | Status : SUCCESS ===
ok
Update the list of affinityGroups by using affinity groupnames ... === TestName: test_02_update_aff_grp_by_names | Status : SUCCESS ===
ok
Update the list of affinityGroups for vm which is not associated ... === TestName: test_03_update_aff_grp_for_vm_with_no_aff_grp | Status : SUCCESS ===
ok
Update the list of Affinity Groups to empty list ... SKIP: Skip - Failing - work in progress
Update the list of Affinity Groups on running vm ... === TestName: test_05_update_aff_grp_on_running_vm | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 42 tests in 976.432s
OK (SKIP=1)
* pr/1134:
CLOUDSTACK-6276 Removing unused parameter in integration test for projects
CLOUDSTACK-6276 Removing unused parameter in integration test
CLOUDSTACK-6276 Fixing affinity groups for projects
Signed-off-by: Remi Bergsma <github@remi.nl>
CLOUDSTACK-9080: Resource limits for Primary arent respected during attachprimary store resource limit check is not performed while attaching a
volume to a vm. Added them same.
Also added a marvin test case to verify the same.
Testing:
BEFORE
No error is shown in UI when trying to attach a volume even after reaching the resource limits.
```
mysql> select * from resource_limit where type="primary_storage";
+----+-----------+------------+-----------------+-------------+
| id | domain_id | account_id | type | max |
+----+-----------+------------+-----------------+-------------+
| 10 | NULL | 4 | primary_storage | 21474836480 |
+----+-----------+------------+-----------------+-------------+
1 row in set (0.00 sec)
mysql> select * from resource_count where account_id=4 and type='primary_storage';
+----+------------+-----------+-----------------+-------------+
| id | account_id | domain_id | type | count |
+----+------------+-----------+-----------------+-------------+
| 63 | 4 | NULL | primary_storage | 48318382080 |
+----+------------+-----------+-----------------+-------------+
1 row in set (0.00 sec)
```
AFTER
Following error message is shown in UI and the volume is not attached
The resource limits stays the same
```
mysql> select * from resource_limit where type="primary_storage";
+----+-----------+------------+-----------------+-------------+
| id | domain_id | account_id | type | max |
+----+-----------+------------+-----------------+-------------+
| 10 | NULL | 4 | primary_storage | 21474836480 |
+----+-----------+------------+-----------------+-------------+
1 row in set (0.01 sec)
mysql> select * from resource_count where account_id=4 and type='primary_storage';
+----+------------+-----------+-----------------+-------------+
| id | account_id | domain_id | type | count |
+----+------------+-----------+-----------------+-------------+
| 63 | 4 | NULL | primary_storage | 48318382080 |
+----+------------+-----------+-----------------+-------------+
1 row in set (0.00 sec)
```
Marvin test: nosetests --with-marvin --marvin-config=setup/dev/advanced.cfg --zone=xen-zone0 --hypervisor=xenserver test/integration/component/test_ps_resource_limits_volume.py
before the change
```
# do ... === TestName: test_attach_volume_exceeding_primary_limits | Status : FAILED ===
AssertionError: Resource count 23 should match with the expected resource count 22\n
```
After the change
```
# do ... === TestName: test_attach_volume_exceeding_primary_limits | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 1 test in 1178.354s
OK
```
* pr/1107:
CLOUDSTACK-9080: Resource limits for Primary arent respected during attach.
Signed-off-by: Remi Bergsma <github@remi.nl>
