This implements the systemvm list API response creator to find and use
the host record for a ssvm/cpvm to get the agent status and other
details like last disconnected date and agent version.
Fixes 3875
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This makes the listSystemVms API to return the host status (agent state),
version and last pinged information. This makes it possible for UIs
to call a single API to get this information.
After a local template is uploaded via browser, the generated usage event with type = "TEMPLATE.CREATE" is persisted with the data store ID instead of the zone ID on the zone_id column. The fix will refactor the upload monitor logic, as after the upload completes, it sets the datastore ID on the zone ID column for the created "TEMPLATE.CREATE" usage event. This refactor will query the DB for the data store and will set its associated zone ID in the usage field.
The fix produces the same behaviour as when registering a template from URL.
FIx is also for uploading VOLUME from local/via browser.
Fixes#3783
As reported in the issue, creating volumes from pure snapshot fails with NPE. This is due to order of calls where disk offering access is checked before checking disk offering value. This PR fixes the same.
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
Fixes#3191
When a template is registered, code stores md5sum of the downloaded file in the vm_template table. However, this downloaded file could be deleted after template installation if it is not an actual (.qcow2, .ova, etc.) file. When the user copies a template using copyTemplate API, the actual template file will be copied across the image stores. Matching checksum for the copied templated file and the stored value from the vm_template table will result in a mismatch.
Changes will set an empty checksum value for the copied template while passing to download service which allows skipping wrong checksum check for the copied while install.
However, this results in a change in checksum value for concerned template entry in vm_template table post template install.
Co-authored-by: dahn <daan.hoogland@gmail.com>
The List Management Server api returns a list of all the management servers but fails when trying to list by id or name. This ensures that it fetches the details as per the parameters passed.
Fixes: #3833
The metrics API has few properties missing that are present in the corresponding resource.
Fixes#3831
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Co-authored-by: Rohit Yadav <rohit@apache.org>
Steps to reproduce the issue
(1) create a custom service offering
(2) create a vm with the offering
(3) update vm with displayvm=false, returns an error
(local) > update virtualmachine id=f33fd06a-7643-40d1-833f-272845d9ba09 displayvm=false
Error 530: {"updatevirtualmachineresponse":{"uuidList":[],"errorcode":530,"cserrorcode":9999}}
When start a vm or migrate a vm (away from a host in host maintenance), cloudstack will check capacity of all hosts and choose one. If there are hundreds of hosts on the platform, it will take some seconds. When cloudstack choose a host and start/migrate vm to it, the resource consumption of the host might have been changed. This normally happens when we start/migrate multiple vms.
It would be better to double check the host capacity when start vm on a host.
This PR includes the fix for cpucore capacity when start/migrate a vm.
When we calculate a resource consumption of a host, we need to take the vms in following states into calculation: Running, Starting, Stopping, Migrating (to the host), and vms are Migrating from the host. Because, when stop a vm, the resource on host will be released when vm is stopped. When migrate a vm, the resource on destination host will be increased before migration starts, and resource on source host will be decreased after migraiton succeeds.
In cloudstack, there is a task named CapacityChecked which run every 5 minutes (capacity.check.period =300000 ms by default). It recalculates capacity of all hosts. However, it takes only vms in Running and Starting into consideration. We have faced some issues in host maintenance due to it.
Steps to reproduce the issue
(1) migrate N vms from host A to host B, cpu/ram resource increases before the migration.
(2) capacity check recalculate the capacity of hosts. used capacity of Host B will be reset to original value (not including the vms in Migrating).
(3) migrate some more vms from other host to host B, the migrations are allowed by cloudstack (because used capacity is incorrect). If the actual used memory exceed the physical memory on the host, there might be some critical issues (for example, libvirt dies)
Steps to reproduce the issue
(1) create an account (test)
(2) create a vm with the account (test)
(3) login with admin, and upgrade the vm to another offering
(4) the resource count (cpu,memory) of admin increases, not the account (test).
After commit fbf488497fb863c13fc0908281e3f4f86906df43, admin need to specify an ipv4 or ipv6 addresses when add IP to nic which breaks backward compatibity. If IP is not specified, a IPv4 address should be returned.
* server: Do NOT cleanup dhcp and dns when stop a vm
According comment in PR #3608, dhcp and dns entries are cleaned up only when a VM is expunged.
Revert part of commit 8fb388e9312b917a8f36c7d7e3f45985a95ce773.
* server: cleanup dns/dhcp entries in removeNic instead of finalizeExpunge
This fixes a behaviour to not cleanup DHCP and DNS rules for NICs of a
VM in the VR when it is stopped, but instead when VM is expunged because
stopped VMs in CloudStack still retain the IPs and records.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
is not used; probably it is a legacy code/table.
Therefore, remove the verification that counts the IPs from
UserIpv6AddressVO in order to check if it can use the network for
deploying new VMs in UI [1].
[1] com.cloud.network.NetworkModelImpl.canUseForDeploy(Network).
Fixes NPE when trying to find suitable storage pools for a volume
when the volume is not attached to a VM.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
When a network IP range is removed, the "vlan" stays mapped on pod_vlan_map; therefore, the method that lists the VLANs by pod id will return null VLANS.
This PR adds proper verifications to avoid null pointer exception when deploying VRs on a pod with removed VLANs. The exception was caused on getPlaceholderNicForRouter.
Problem: In Vmware, appliances that have options that are required to be answered before deployments are configurable through vSphere vCenter user interface but it is not possible from the CloudStack user interface.
Root cause: CloudStack does not handle vApp configuration options during deployments if the appliance contains configurable options. These configurations are mandatory for VM deployment from the appliance on Vmware vSphere vCenter. As shown in the image below, Vmware detects there are mandatory configurations that the administrator must set before deploy the VM from the appliance (in red on the image below):
Solution:
On template registration, after it is downloaded to secondary storage, the OVF file is examined and OVF properties are extracted from the file when available.
OVF properties extracted from templates after being downloaded to secondary storage are stored on the new table 'template_ovf_properties'.
A new optional section is added to the VM deployment wizard in the UI:
If the selected template does not contain OVF properties, then the optional section is not displayed on the wizard.
If the selected template contains OVF properties, then the optional new section is displayed. Each OVF property is displayed and the user must complete every property before proceeding to the next section.
If any configuration property is empty, then a dialog is displayed indicating that there are empty properties which must be set before proceeding
image
The specific OVF properties set on deployment are stored on the 'user_vm_details' table with the prefix: 'ovfproperties-'.
The VM is configured with the vApp configuration section containing the values that the user provided on the wizard.
This reverts commit 7a27e35a612f13a0ce43459b22e01d9b69627220.
We're near 4.13 RC1, we've low confidence if the changes from #3152
would cause other regressions so reverting this. The author may send a
PR again towards 4.14.
Regressions found are all related to template and iso registration and
upload.
Fixes:
- This allows getUploadParamsForIso for all user role types, also fixes
authorised field for getUploadParamsForTemplate API.
- Fix global setting description to say what is used when value is empty/blank.
- For VM running/allocated usage description, use parenthesis to return the instance name and ID.
- Display template download progress when template is added to a project
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Retrieval of an image store using ImageStoreProviderManager has been refactored by introducing three different methods,
DataStore getRandomImageStore(List<DataStore> imageStores);
To get an image store for reading purpose. Threshold capacity check will not be used here.
DataStore getImageStoreWithFreeCapacity(List<DataStore> imageStores);
To get an image store for reading purpose. Threshold capacity check will be used here and the store with max free space will be returned. If no store with filled storage less than the threshold is found, the NULL value will be returned.
List<DataStore> listImageStoresWithFreeCapacity(List<DataStore> imageStores);
To get a list of image stores for writing purpose which fulfills threshold capacity check.
Correspondingly DataStoreManager methods have been refactored to return similar values for a given zone.
Fixes#3287 - NULL value will be returned when secondary storage is needed for writing but there is not store with free space.
Fixes#3041 - Rather than returning random secondary storage for writing, storage with max. free space will be returned.
Fixes#3478 - For migration on VMware, all writable secondary storage will be mounted while preparation.
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
Make use of Java 8 default implementation in interfaces,
to remove code duplication between XxxCmd and XxxCmdAsAdmin.
Refactor checkFormat by pre-calculating the supported
extensions. Also make use of this in ImageStoreUtil.
Makes it easier to add new file and compression formats.
There are certain scenarios where the 169.254.0.0/16 subnet is used for different
purposes then CloudStack on a hypervisor.
Once of such scenarios is a BGP+EVPN+VXLAN setup using BGP Unnumbered where the
169.254.0.1 address is used by Frr/Zebra BGP routing to send traffic to the
neighboring router.
The following settings can be changed in the agent.properties (default values added):
control.cidr=169.254.0.0/16
Make sure the global setting 'control.cidr' matches the values defined in the agent.propeties!
In the future the mgmt server can send this parameter to a KVM Agent on startup, but at the moment
this framework is not in place and thus these values can't be send to the Agent in a proper manner.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Currently when refreshing disk usage stats all kvm agents are asked to collect stats for all volumes. In setups with multiple kvm hosts where managed storage is used, not all volumes are attached to all kvm hosts, this results in a large number of warnings in the kvm agent logs. This change introduces a filter step in case managed storage is used so that the management server only requests kvm agents for stats about volumes that are connected to each kvm host.
Add CephSnapshotStrategy to handle RBD revert (rollback) snapshot. In order to support RBD revert (rbd_rollback), this PR adds a CephSnapshotStrategy class to handle Ceph/RBD snapshot actions.
Fixes: #3114
When adding iprange for VLANs there are 3 cases -
VLAN under consideration has a tag (like 101)
VLAN under consideration has a tag but as a range (like 101-124)
VLAN is untagged (i.e. id is "untagged")
Before adding iprange we have to check for possible overlaps and throw exception. This needs to be done as follows -
If VLAN Tag ID is numeric or a range we need to call UriUtils.checkVlanUriOverlapmethod which internally tries to expand the range as verifies if there are overlaps. If URI overlaps (i.e. there are overlapping VLAN tags) we then need to verify if the iprange being added overlaps with previously added ranges.
If there are no overlapping tags we simply need to test for public networks being present in the VLAN.
A Regression was introduced in 41fdb88#diff-6e2b61984e8fa2823bb47da3caafa4eeR3174 which caused comparing 'untagged' string as a numeric VLAN Tag range and and attempted expanding it to test overlap in UriUtils.checkVlanUriOverlap.
To fix the bug in the issue, we need to handle the untagged case separately as it's non-numeric tag in code. For untagged VLANs and overlapping VLAN URIs we need to check for ipranges and gateways which happens naturally after this change. For tagged VLANs with non-overlapping URIs we need to check if there is a public network.
Set integration.api.port to (0) zero as default. CloudStack provides CloudStack API Unauthenticated Access through port 8096. It should not be open to the Internet in any case.
* Allow users to share templates with Accounts or Projects through the
updateTemplate permissions API
* Change behaviour to show only supported projects and accounts with update template permissions
* Allow admins to see accounts dropdown and only hide lists for users
* Don't allow sharing project owned templates as you cannot retrieve them in list api calls
* Add revoke certificates API
* Add background task to sync certificates
* Fix marvin test and revoke certificate
* Fix certificate sent to hypervisor was missing headers
* Fix background task for uploading certificates to hosts
