Fixes: #4972
This PR sets systevms' agent state to disconnected when it is stopped. Currently, when a systemVM (Console Proxy VM / Secondary storage VM) is stopped, the agent state still appears to be 'Up'
* server: destroy ssvm, cpvm on last host maintenance
When a single or last UP host enters into maintenance just stopping SSVM and CPVM will leave behind VMs on hypervisor side. As these system vms will be recreated they can be destroyed.
Fixes#3719
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* fix methods
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* immediately destroy systemvms
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* fix destroy
Added bypassHostMaintenance flag in Comma.java class to allow command to be handled by host agent even when host is in maintenace.
Flag is set true only for delete commands for ssvm and cpvm.
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* unit test fix
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* fix missing return statement
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* fix
VM should be stopped with cleanup before calling expunge else it server may through error with host in PrepareForMaintenance state.
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* refactor
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* rename
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* refactor
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* forceha: fix vm is not started if it is poweroff from inside
steps to reproduce the issue
(1) make sure force.ha is true in global setting. if not, change it to true, and restart mgt server
(2) create a service offering , ha is not enabled
(3) create a vm
(4) log into the vm, and power off via cli.
expected result: vm is started again by cloudstack
actual result: vm is not started.
* forceha: fix vms are still running if host is force-removed
when host can be force removed, however vms are stopped in cloudstack, but not stopped on host
```
(localcloud) 🐱 > delete host id="a5625393-444d-4d0a-b31d-62baf88a8be1" forced=true
{
"success": true
}```
after some minutes, vms are still runnning on host
```
root@mgt01:~# ssh node63 virsh list
Id Name State
---------------------------
1 i-2-19-VM running
2 i-2-11-VM running
```
error message are
```
Cannot transmit host 2 to Enabled state
com.cloud.utils.fsm.NoTransitionException: No next resource state found for current state = Enabled event = DeleteHost
at com.cloud.resource.ResourceManagerImpl.resourceStateTransitTo(ResourceManagerImpl.java:1216)
at com.cloud.resource.ResourceManagerImpl$1.doInTransactionWithoutResult(ResourceManagerImpl.java:907)
```
* forceha: Make ForceHA dynamic
Datastore cluster as a primary storage support is already there. But if any changes at vCenter to datastore cluster like addition/removal of datastore is not synchronised with CloudStack directly. It needs removal of primary storage from CloudStack and add it again to CloudStack.
Here synchronisation of datastore cluster is fixed without need to remove or add the datastore cluster.
1. A new API is introduced syncStoragePool which takes datastore cluster storage pool UUID as the parameter. This API checks if there any changes in the datastore cluster and updates management server accordingly.
2. During synchronisation if a new child datastore is found in datastore cluster, then management server will create a new child storage pool in database under the datastore cluster. If the new child storage pool is already added as an individual storage pool then the existing storage pool entry will be converted to child storage pool (instead of creating a new storage pool entry)
3. During synchronisaton if the existing child datastore in CloudStack is found to be removed on vCenter then management server removes that child datastore from datastore cluster and makes it an individual storage pool.
The above behaviour is on par with the vCenter behaviour when adding and removing child datastore.
IKE version allows selecting ike (autoselect), ikev1, or ikev2.
Split connections gives an option of separating the first right subnet from the rest, and kicking out individual statements for each right subnet for better cross-compatibility.
Backported from PR: #4137
update per PR suggestion
Fixes#3138
Co-authored-by: Greg Goodrich <ggoodrich@ippathways.com>
Co-authored-by: Daan Hoogland <dahn@onecht.net>
Co-authored-by: Pearl Dsilva <pearl.dsilva@shapeblue.com>
This PR addresses the issue raised at #4545 (Fail to change Service offering from local <> shared storage).
When upgrading a VM service offering it is validated if the new offering has the same storage scope (local or shared) as the current offering. I think that the validation makes sense in a way of preventing running Root disks with an offering that does not match the current storage pool. However, the validation only compares both offerings and does not consider that it is possible to migrate Volumes between local <> shared storage pools.
The idea behind this implementation is that CloudStack should check the scope of the current storage pool which the ROOT volume is allocated; this, it is possible to migrate the volume between storage pools and list/upgrade according to the offerings that are supported for such pool.
This PR also fixes an issue where the API command that lists offerings for a VM should follow the same idea and list based on the storage pool that the volume is allocated and not the previous offering.
Fixes: #4545
The default length is 255, which caused a truncation of data if
the JSON object representing the backup volumes is too big.
It caused errors when backups were made on VMs with 3 volumes
or more.
`vm_instance.backup_volumes` has the type TEXT, which has a
maximal length of 65535 characters.
Fixes#4965
This PR makes sure no orphaned snapshot details are considered in the cleanup at startup job.
a real solution would be to implement some kind of cascading delete, but as the parent record is "only" marked as removed this would be a bit com
Co-authored-by: Daan Hoogland <dahn@onecht.net>
* prevent other vm disks getting deleted
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* vmware: fix inter-cluster stopped vm migration
Fixes#4838
For inter-cluster migration without shared storage, VMware needs a host to be specified. Fix is to specify an appropriate host in the target cluster.
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* fix detached volume inter-cluster migration
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* cleanup unused method
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* review changes
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* changes
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* vmware: allow attached volume migration using VmwareStorageMotionStrategy
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* find vm clusterid with multiple ROOT volumes
VM can have multiple ROOT volumes and some can be on zone-wide store therefore iterate over all of them till a cluster ID is found.
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* fix successive storage migration
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* fix intercluster check
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* refactor vm cluster, host method
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* remove inter-pod check
Added by mistake, VMware won't have pods
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* address review comment
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
When invoking migrateVirtualMachineWithVolume API call and a strategy isn't found the volumes are left in Migrating state
This PR puts back the volumes to Ready state.
This PR fixes: #4462
Problem Statement:
In case of VMware, when a VM having multiple data disk is destroyed (without expunge) and tried to recover the VM then the previous data disks are not attached to the VM like before destroy. Only root disk is attached to the VM.
Root cause:
All data disks were removed as part of VM destroy. Only the volumes which are selected to delete (while destroying VM) are supposed to be detached and destroyed.
Solution:
During VM destroy, detach and destroy only volumes which are selected during VM destroy. Detach the other volumes during expunge of VM.
Fixes#4201
This PR addresses the issue of a vm snapshot being indefinitely stuck is Expunging state in case deletion fails.
Co-authored-by: Pearl Dsilva <pearl.dsilva@shapeblue.com>
Fixes#4838
For inter-cluster migration without shared storage, VMware needs a host to be specified. Fix is to specify an appropriate host in the target cluster during a stopped VM migration. Also, find target datastore using the host in the target cluster.
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
Adds new/missing guest os mappings for XCP-ng/Xenserver 8.1
Copy guest OS mappings from XCP-ng/Xenserver 8.1 for XCP-ng/Xenserver 8.2
Adds Ubuntu 20.04 guest os mapping for XCP-ng/Xenserver 8.2
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
Fixes#4517
Adds capacity checks for RandomAllocator (host allocator)
Factors out host cpu capability and capacity check wrt serviceoffering code into CapacityManager.
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
This PR aims at introducing persistence mode in L2 networks and enhancing the behavior in Isolated networks
Doc PR apache/cloudstack-documentation#183
Co-authored-by: Pearl Dsilva <pearl.dsilva@shapeblue.com>
This contains 3 main changes
(1) add NETWORK_STATS_ethX for all nics with public ips in VPC VRs (current: NETWORK_STATS_eth1)
(2) DO NOT create records in user_statistics for each VPC tier (only one record per public nic per VPC VR)
(3) send NetworkUsageCommand before unplugging a NIC with public IPs from VPC VR
Public IP addresses dedicated to one domain should not be accessed
by other domains. Also, root admin should be able to display all
public ip addresses in system.
Currently following issues exist
1. Public IP address assigned to one domain can be accessed by
other sibling domains
If use.system.public.ip is false then child domains should not
see public ip of ROOT domain
Before fix
```
(test1) mgt01 > list publicipaddresses listall=true fordisplay=true allocatedonly=false forvirtualnetwork=true filter=ipaddress,
{
"count": 59,
"publicipaddress": [
```
After fix
```
(test) mgt01 > list publicipaddresses listall=true fordisplay=true allocatedonly=false forvirtualnetwork=true filter=ipaddress,
{
"count": 10,
```
* server: create DB entry for storage pool capacity when create storage pool
* Revert "server: create DB entry for storage pool capacity when create storage pool"
This reverts commit e790167bfe8cdebc80c8a51cb0191184edc40afd.
* server: create DB entry for storage pool capacity when create zone-wide storage pools
Update new systemvmtemplate for 4.15.1.0; synced:
http://download.cloudstack.org/systemvm/4.15/
A new template is necessary due to many security fixes over the last year, the 4.15.0 systemvmtemplate was created about a year ago.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Co-authored-by: Pearl Dsilva <pearl.dsilva@shapeblue.com>
* Update vm_template table removed field when template is deleted
* Update method name
* address comment
* Extracted code to separate methods
* Address test failure
* refactor test cleanup
Co-authored-by: Pearl Dsilva <pearl.dsilva@shapeblue.com>
