This introduces new global settings to handle how client address checks
are handled by the API layer:
proxy.header.verify: enables/disables checking of ipaddresses from a
proxy set header
proxy.header.names: a list of names to check for allowed ipaddresses
from a proxy set header.
proxy.cidr: a list of cidrs for which \"proxy.header.names\" are
honoured if the \"Remote_Addr\" is in this list.
(cherry picked from commit b65546636d84a5790e0297b1b0ca8e5a67a48dbc)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit b1e0bf9dbd464f8fb7c22f36505dee0148e2d6f4)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* NSX integration - skeletal code
* Fix module not loading on startup
* add upgrade path and daos
\n add nsx controller command
* add support for adding and listing nsx provider to a zone
* add license
* add default VPC offering and update upgrade path
* add global setting to enable nsx plugin
* add delete nsx controller operation
* add nsxresource
* add NSX resource , api client, create tier1 gw
* update db
* update response and add license
* Add support to create and delete nsx tier-1 gateway
* add license
* cleanup and add skeletal code for network creation
* add create/delete segment and UI integration
* add license
* address code smells - part 1
* fix test / build failure
* NSX integration - skeletal code
* Fix module not loading on startup
* add upgrade path and daos
\n add nsx controller command
* add support for adding and listing nsx provider to a zone
* add license
* add default VPC offering and update upgrade path
* add global setting to enable nsx plugin
* add delete nsx controller operation
* add nsxresource
* add NSX resource , api client, create tier1 gw
* update db
* update response and add license
* Add support to create and delete nsx tier-1 gateway
* add license
* cleanup and add skeletal code for network creation
* add create/delete segment and UI integration
* add license
* address code smells - part 1
* fix test / build failure
* add ui changes + update nsx_provider table transport zones + use NSX broadcast domain for add nics to router
* ui: fix password field, and backend changes
* add route advertisement
* update offering
* update offering
* add sleep before deletion of vpc / tier g/w for ports to be removed
* move creation of segments to design phase
* change provider to VPC router for Dhcp & dns service in an nsx offering
* Add public nic for NSX
* reserve first IP (after g/w) of subnet for router nic - NSX
* revert reserving 1st IP in vpc segments
* [NSX] Create a DHCP relay and add it to a VPC tier segment (#107)
* Create DHCP relay command and execute request
* In progress integrate with networking
* Create DHCP relay config on the network VR allocation
* Revert domain router dao changes
* Create DHCP relay con VR nic plug to NSX network
* Link DHCP relay config to segment after creation
* [NSX] Cleanup DHCP Relay config on segment deletion (#108)
* Cleanup DHCP Relay config on segment deletion
* update segment & relay name generators and call delete dhcprelay after deletion of segment
* address comment
* [NSX] Fix DHCP relay config deletion was missing zone name (#8068)
* [NSX] Refactor API wrapper operations (#8059)
* [NSX] Refactor API wrapper operations
* Big refactor
* Address review comment
* change network cidr to cidr to prevent NPE
* add domain and zone names to the various networks - vpc & tier
---------
Co-authored-by: Pearl Dsilva <pearl1594@gmail.com>
* Nsx unit tests (#8090)
* Add tests
* add test for NsxGuestNetworkGuru
* add unit tests for NsxResource
* add unti tests for NsxElement
* cleanup
* [NSX] Refactor API wrapper operations
* update tests
* update tests - add nsxProviderServiceImpl test
* add unit test - NsxServiceImpl
* add license
* Big refactor
* Address review comment
* change network cidr to cidr to prevent NPE
* add domain and zone names to the various networks - vpc & tier
* fix tests
---------
Co-authored-by: nvazquez <nicovazquez90@gmail.com>
* modify NSX resource naming convention (#8095)
* modify NSX resource naming convention
* remove unused imports
* add a setup phase between desgin and implementation of a network for intermediary steps
* add method to all classes
* NSX: Refactor Network & VPC offering (#8110)
* [NSX] Refactor API wrapper operations
* Network offering changes for NSX
* fix services and provider combination
* address comments: rename param
* update nsx_mode parameter
---------
Co-authored-by: nvazquez <nicovazquez90@gmail.com>
* fix test
* [NSX] Allow NSX isolated networks (#8132)
* Add network offerings for NSX on isolated networks
* Fix offerings creation
* In progress NSX isolated network
* Fixes
* Fix NIC allocation to router
* NSX: Add Step for Adding Public traffic network for NSX During zone creation (#8126)
* NSX: Add Step for Adding Public traffic network for NSX
* address comments and cleanup
* address comment
* remove indent
* NSX: Create and Delete static NAT & Port forward rules (#8131)
* NSX: Create and delete NSX Static Nat rules
* fix issues with static nat
* add static nat
* Support to add and delete Port forward rules
* add license
* fix adding multiple pf rules
* cleanup
* fix lint check
* fix smoke tests
* fix smoke tests
* Nsx add lb rule (#8161)
* NSX: Create and delete NSX Static Nat rules
* fix issues with static nat
* add static nat
* Support to add and delete Port forward rules
* add license
* fix adding multiple pf rules
* cleanup
* NSX: Add support to create and delete Load balancer rules
* fix deletion of lb rules
* add header file and update protocol detail
* build failure fix
* [NSX] Add SNAT support (#8100)
* In progress add source NAT
* Fix after merge
* Fix tests
* Fix NPE on isolated network deletion
* Reserve source NAT IP when its not passed for NSX VPC
* Create source NAT rule on VR NIC allocation
* Fix update VPC and remove VPC to update and remove SNAT rule
* Fix packaging
* Address review comment
* Fix build
* fix build - unused import
* Add defensive checks
* Add missing design to NSX public guru
---------
Co-authored-by: Pearl Dsilva <pearl1594@gmail.com>
* NSX: Fix VR public NIC allocation (#8166)
* NSX: fix LB member addition and deletion and add defensive checks (#8167)
* Fix public NIC NPE on broadcast URI
* NSX: Router Public nic to get IP from systemVM Ip range (#8172)
* NSX: Router Public nic to get IP from systemVM Ip range
* Fix VR IP address and setSourceNatIp command
* NSX: hide systemVM reserved IP range SourceNAT
* fix test
---------
Co-authored-by: nvazquez <nicovazquez90@gmail.com>
* fix test failure
* test failure fix
* [NSX] Fix update source NAT IP (#8176)
* [NSX] Fix update source NAT IP
* Fix startup
* Fix API result
* NSX - add LB route Advertizement (#8192)
* [NSX] Add ACL types support (#8224)
* NSX: Create segment group on segment creation
* Add unit tests
* Remove group for segment before removing segment
* Create Distributed Firewall rules
* Remove distributed firewall policy on segment deletion
* Fix policy rule ID and add more unit tests
* Fix DROP action rules and transform tests
* Add new ACL rules
* Fixes
* associate security policies with groups and not to DFW and add deletion of rules
* Fix name convention
---------
Co-authored-by: Pearl Dsilva <pearl1594@gmail.com>
* NSX: Fix creation of VPCs (#8320)
* Fix ACL rules creation (#8323)
* [NSX] Fix database views (#8325)
* NSX: Add CKS Support & Firewall rules for Isolated Networks (#8189)
* NSX: Add ALL LB IP to the list of route advertisements in tier1
* NSX: Support Source NAT on NSX Isolated networks
* NSX: Cks Support
* NSX: Create segment group on segment creation
* Add unit tests
* Remove group for segment before removing segment
* Create Distributed Firewall rules
* Remove distributed firewall policy on segment deletion
* Fix policy rule ID and add more unit tests
* Add support for routed NSX Isolated networks \n and non RFC 1918 compliant IPs
* Add support for routed NSX Isolated networks \n and non RFC 1918 compliant IPs
* Add Firewall rules
* build failure - fix unit test
* fix npes
* Add support to delete firewall rules
* update nsx cks offering
* add license
* update order of ports in PF & FW rules
* fix filter for getting transport zones
* CKS support changed - MTU updated, etc
* add LB for CKS on VPC
* address comments
* adapt upstream cks logic for vpc
* rever mtu hack
* update UI changes as per upstream fix
* change display test for CKS n/w offerings for isolated and VPC tiers
* add extra line for linter
* address comment
* revert list change
---------
Co-authored-by: nvazquez <nicovazquez90@gmail.com>
* fix ui build failure
* [NSX] Address SonarCloud Bugs (#8341)
* [NSX] Address SonarCloud Bugs
* Fix NSX API connection issues
* NSX: Add unit tests to increase coverage (#8355)
* NSX: Add unit tests
* cleanup unused imports
* add more unit tests
* add tests for publicnsxnetworkguru
* add license
* fix build failures
* address sonar comment
* fix security hotspots
* NSX: Add more unit tests (#8381)
* NSX : Unit tests
* remove unused imports
* remove unused import causing build failure
* fix build failures due to unused imports
* fix build failure
* fix test assertion
* remove unused imports
* remove unused import
* Nsx UI zone bug (#8398)
* NSX: Attempt to fix NSX Zone creation bug for public networks
* fix zone wizard public traffic issue
* add proper filtering of offerings based on VPC nsx mode
* clean up console logs
* NSX: Fix code smells and reported bugs (#8409)
* NSX: Fix code smells and reported bugs
* fox override issue
* remove unused imports
* fix test
* refactor code to reduce complexity
* add lisence
* cleanup
* fix build failure
* fix build failure
* address comments
* test - add config to ignore certain files from test coverage
* test exclusion of classes from test cov
* rever pom changes
* [NSX] Add more unit tests (#8431)
* [NSX] Add more unit tests
* More tests
* Fix build errors
* NSX: Prevent creation of L2 and Shared networks for NSX (#8463)
* NSX: Prevent creation of L2 and Shared networks for NSX
* add checks to backend to prevent creation of l2 and shared networks in nsx zones and filter only nsx offerings when creating isolated networks
* cleanup
* NSX: Fix code smells (#8436)
* NSX: Fix code smells
* Add changes to service creation logic
* CKS: Add action to during firewall rule creation (#8498)
* NSX,UI: Deduplicate network list when creating kubernetes clusters (#8513)
* NSX: Make LB service selectable in network offering (#8512)
* NSX: Make LB service selectable in network offering
* fix label
* address comments
* address comments
* NSX: Add appropriate error message when icmp type is set to -1 for NSX (#8504)
* NSX: Add appropriate error message when icmp type is set to -1 for NSX
* address comments
* update text
* fix test
* fix test - build failure
* fix test - build failure
* NSX: Cleanup NSX resources during k8s cluster cleanup (#8528)
* fix test failure
* NSX: Improve segment deletion process (#8538)
* NSX: Add passive monitor for NSX LB to test whether a server is available (#8533)
* NSX: Add passive monitor for NSX LB to test whether a server is available
* Add active monitors too
* fix build failure
* NSX: Add check for ICMP code / type for NSX zones (#8542)
* NSX: Fix Routed Mode for Isolated and VPC networks (#8534)
* NSX: Fix Routed Mode for Isolated and VPC networks
* NSX: Fix Routed mode - add checks for ports added for FW rules
* clean up code
* fix build failure
* NSX: Add retry logic with sleep to delete segments (#8554)
* NSX: Add retry logic with sleep to delete segments
* add logs
* NSX: Fix custom ACL check (#2)
* NSX: Fix custom ACL check
* NSX: Fix custom ACL check
* Nsx vpc routed mode (#5)
* NSX: Fix VPC routed mode
* NSX: VPC route mode
* remove unnecessary changes
* Nsx: Support internal LB (#4)
* NSX: Support internal LB service in NSX
* add lb removal logic
* Fix UI issue hiding internal LB tab
* Refactor method name
---------
Co-authored-by: nvazquez <nicovazquez90@gmail.com>
* NSX: Improve NSX resource cleanup process (#3)
* Fix unit test
* NSX: Add SourceNAT service to the default Routed offering for VPC (#13)
* Fix VPC restart with cleanup (#12)
* NSX: Fix ACL rule removal on replacement and fix rule order (#11)
* NSX: fix smoke test failure for ACLs (#9)
* Fix unit tests
* Fix NSX plugin pom XML
* NSX: Add support to re-order ACL rules (NSX FW rules) (#14)
* [WIP] NSX: Add support to re-order ACL rules (NSX FW rules)
* fix reordering of acl rules on all networks that it is associated to
* clean up and attempt test fix
* Fix tests
* Remove unused import
* tweak reorder logic
---------
Co-authored-by: nvazquez <nicovazquez90@gmail.com>
* Fix zone creation issue for internal load balancer
* Fix
* Fix unit test
* fix logger
* fix logger
* fix logger
* NSX: Fix VPC form to ignore source NAT IP when creating VPCs and fix label
* Move SQL changes to the newest schema file
* NSX: Last Fixes
* Fix build
---------
Co-authored-by: nvazquez <nicovazquez90@gmail.com>
* Normalize logs
All classes that could have their loggers inherited from their fathers had their own loggers deleted;
Most loggers didn't have to be static, so most of them were normalized so that they wouldn't be;
All loggers are protected now;
Static logger's name are now 'LOGGER';
Non-static logger's name are now 'logger';
New class DbUpgradeAbstractImpl created so that all Upgraders extend it and inherit its logger
* Upgrade log4j
* fix errors caused by the merge
* Refactor cglibThrowableRenderer functionality to log4j2 and upgrade the last configuration files
* fix sonarcloud bug
* Fix errors caused by merge, remove some unused loggers, and rename a variable that was mistakenly renamed on the normalization commit
* Readd snmpTrapAppender, remove TestAppender
* Regenerate changes
* regenerate changes
* refactor last custom appender
* fix systemvm configuration xml
* Regenerate changes
* Regenerate changes
* regenerate changes
* Regenerate changes
* regenerate changes
* regenerate changes
* regenerate changes
* Fix utils pom
* fix some tests
* regenerate changes
* Fix jar being printed on exception
* fix logging in system VMs, fix commands not having log4j2 classpath.
* regenerate changes
* Fix some unwanted renomeations
* fix end of file
* regenerate changes
* regenerate changes
* fix merge error
* regenerate changes
* fix tests
* regenerate changes
* regenerate changes
* regenerate changes
* regenerate changes
* regenerate changes
* regenerate changes
* regenerate changes
* readd reload4j to tungsten as juniper depends on it
* Regenerate changes
* regenerate changes
* regenerate changes
* regenerate changes
* regenerate changes
* re-add reload4j dependency to network-contrail, as juniper depends on it
* regenerate changes
* regenerate changes
* regenerate changes
* fix typo
* regenerate changes
* regenerate changes
* Fix end of files
* regenerate changes
* add logj42 to cloud-utils-SHADED.jar
* regenerate changes
* regenerate changes
* regenerate changes
* regenerate changes
* regenerate changes
* regenerate changes
* regenerate changes
* regenerate changes
* Regenerate changes
* Regenerate changes
* Regenerate changes
* regenerate changes
* Regenerate changes
* regenerate changes
* Regenerate changes
* Regenerate changes
* Regenerate changes
* regenerate changes
* Regenerate changes
* Regenerate changes
* fix some tests
* Regenerate changes
* Regenerate changes
* fix test
* Regenerate changes
* Regenerate changes
This PR enables support for user data content upto 1048576 bytes - updates jetty maxFormContentSize value to 1048576 bytes (default is 200000 bytes).
CloudStack can support max user data content to 1048576 bytes (the size can be configurable through vm.userdata.max.length setting, max 1048576), but it's limited due to the default Jetty max content size, which is 200000 bytes.
Configuration Reference from jetty doc:
https://eclipse.dev/jetty/documentation/jetty-9/index.html#configuring-specific-webapp-deployment (check with maxFormContentSize here)
This PR fixes that code coverage is not updated in some modules
The following modules should have better code coverage with this PR
cloud-agent
cloud-api
cloud-core
cloud-framework-cluster
cloud-framework-config
cloud-framework-db
cloud-framework-events
cloud-framework-jobs
cloud-framework-managed-context
cloud-framework-security
cloud-usage
cloud-utils
This PR provides a new primary storage volume type called "FiberChannel" that allows access to volumes connected to hosts over fiber channel connections. It requires Multipath to provide path discovery and failover. Second, the PR adds an AdaptivePrimaryDatastoreProvider that abstracts how volumes are managed/orchestrated from the connector to communicate with the primary storage provider, using a ProviderAdapter interface, allowing the code interacting with the primary storage provider API's to be simpler and have no direct dependencies on Cloudstack code. Lastly, the PR provides an implementation of the ProviderAdapter classes for the HP Enterprise Primera line of storage solutions and the Pure Flash Array line of storage solutions.
This PR adds an config option for the Linstor primary storage driver, that allows you to automatically backup
volume snapshots to the secondary storage.
Additionally it will not mangle the need java-linstor dependency into the client.jar, but instead just copy
the java-linstor.jar into lib.
Config option is called: lin.backup.snapshots and is default false
The scope of this change should be limited, as it only touches the Linstor driver and a part of copyAsync
was implemented with 2 new Linstor specific commands.
OAuth2, the industry-standard authorization or authentication framework, simplifies the process of
granting access to resources. CloudStack supports OAuth2 authentication wherein users can login into
CloudStack without using a username and password. Support for Google and Github providers has been added.
Other OAuth2 providers can be easily integrated with CloudStack using its plugin framework.
The login page will show provider options when the OAuth2 is enabled and corresponding providers are configured.
"OAuth configuration" sub-section is present under "Configuration" where admins can register the corresponding
OAuth providers.
This pull request (PR) implements a Distributed Resource Scheduler (DRS) for a CloudStack cluster. The primary objective of this feature is to enable automatic resource optimization and workload balancing within the cluster by live migrating the VMs as per configuration.
Administrators can also execute DRS manually for a cluster, using the UI or the API.
Adds support for two algorithms - condensed & balanced. Algorithms are pluggable allowing ACS Administrators to have customized control over scheduling.
Implementation
There are three top level components:
Scheduler
A timer task which:
Generate DRS plan for clusters
Process DRS plan
Remove old DRS plan records
DRS Execution
We go through each VM in the cluster and use the specified algorithm to check if DRS is required and to calculate cost, benefit & improvement of migrating that VM to another host in the cluster. On the basis of cost, benefit & improvement, the best migration is selected for the current iteration and the VM is migrated. The maximum number of iterations (live migrations) possible on the cluster is defined by drs.iterations which is defined as a percentage (as a value between 0 and 1) of total number of workloads.
Algorithm
Every algorithms implements two methods:
needsDrs - to check if drs is required for cluster
getMetrics - to calculate cost, benefit & improvement of a migrating a VM to another host.
Algorithms
Condensed - Packs all the VMs on minimum number of hosts in the cluster.
Balanced - Distributes the VMs evenly across hosts in the cluster.
Algorithms use drs.level to decide the amount of imbalance to allow in the cluster.
APIs Added
listClusterDrsPlan
id - ID of the DRS plan to list
clusterid - to list plans for a cluster id
generateClusterDrsPlan
id - cluster id
iterations - The maximum number of iterations in a DRS job defined as a percentage (as a value between 0 and 1) of total number of workloads. Defaults to value of cluster's drs.iterations setting.
executeClusterDrsPlan
id - ID of the cluster for which DRS plan is to be executed.
migrateto - This parameter specifies the mapping between a vm and a host to migrate that VM. Format of this parameter: migrateto[vm-index].vm=<uuid>&migrateto[vm-index].host=<uuid>.
Config Keys Added
ClusterDrsPlanExpireInterval
Key drs.plan.expire.interval
Scope Global
Default Value 30 days
Description The interval in days after which old DRS records will be cleaned up.
ClusterDrsEnabled
Key drs.automatic.enable
Scope Cluster
Default Value false
Description Enable/disable automatic DRS on a cluster.
ClusterDrsInterval
Key drs.automatic.interval
Scope Cluster
Default Value 60 minutes
Description The interval in minutes after which a periodic background thread will schedule DRS for a cluster.
ClusterDrsIterations
Key drs.max.migrations
Scope Cluster
Default Value 50
Description Maximum number of live migrations in a DRS execution.
ClusterDrsAlgorithm
Key drs.algorithm
Scope Cluster
Default Value condensed
Description DRS algorithm to execute on the cluster. This PR implements two algorithms - balanced & condensed.
ClusterDrsLevel
Key drs.imbalance
Scope Cluster
Default Value 0.5
Description Percentage (as a value between 0.0 and 1.0) of imbalance allowed in the cluster. 1.0 means no imbalance
is allowed and 0.0 means imbalance is allowed.
ClusterDrsMetric
Key drs.imbalance.metric
Scope Cluster
Default Value memory
Description The cluster imbalance metric to use when checking the drs.imbalance.threshold. Possible values are memory and cpu.
* Support Jetty's live cert reload
Signed-off-by: Marcus Sorensen <mls@apple.com>
* Update ServerDaemon.java
---------
Signed-off-by: Marcus Sorensen <mls@apple.com>
Co-authored-by: Marcus Sorensen <mls@apple.com>
This PR has 3 improvements for the Linstor primary storage driver:
- Create a separate jar of it and move all Linstor related classes into the correct project (similar to the storpool plugin)
- Add aux properties for Cloudstack volumes in Linstor to make it easier to identify them in Linstor
- Add support for IOPs settings with the Linstor storage plugin
* ms stats thread added
* initial data collection for management server
* empty list management server metrics command
* bean copy into MS metrics object
* ms status VO
* further API and DB plumbing
* minimal metrics response in API
* remove commented, refactor data collection plumbing
* javadocs
* surpress stacktrace on expected error
* update status experiment
* ms status publish framework added
* review comment addressed
* static data to DB and API, /proc/ reading
* addressing review comments
* ui for ms details
* small ui adjustment
* beanCopy
* agentcount response and system parameter
* labels
* package-lock
* add version strings to regular list API
* add shutdown time to DB
* add last start and last stop to regular list response
* distro info in regular response/session count added
* metrics as details
* add heap used and remove details map
* thread-statusses
* move db upgrade to 4.17
* sysmem
* procmem
* ui demo comments applied
* javadoc
* get conf and log file locations
* loginfo
* cpuLoadStats
* no.remote
* extra spaces removed
* clusterlistener
* add unit to kb value
* revert accidental rename
* silly fqcn removed
* get mem info from bean is possible
* refactor long sequence for readability
* registerListener
* listUsageMetrics and isDbLocal
* rats
* local usage and db or not
* minimal listDbMetrics
* db vars and stats
* cleanup and #queries queried
* db stats calculation
* rat
* remove list response wrapper from sinlge details-lists responses
* rudimentary metrics view
* metrics table cleanup
* table makeup, collection dates
* move component to appropriate location
* capitalisation removed
* rebase error resolved
* rename deamon to daemon
* small style comments applied
* another merge issue
* naming comments and boot time
* stop/start prefixed with server
* layout-fix
* listMSMetrics test and test refactor
* usage metrics test
* db metrics test
* extra validations
* Update ui/public/locales/en.json
Co-authored-by: sureshanaparti <12028987+sureshanaparti@users.noreply.github.com>
* descriptions of loadaverages and replica's
* collection time on top
* cpu load on metrics overview
* DbStatsCollection
* some parameter description texts
* labels adjusted
* new output 'kernelversion' and log info cleanup
* labels
* Update api/src/main/java/com/cloud/server/ManagementServerHostStats.java
Co-authored-by: sureshanaparti <12028987+sureshanaparti@users.noreply.github.com>
* Update plugins/metrics/src/main/java/org/apache/cloudstack/response/DbMetricsResponse.java
Co-authored-by: sureshanaparti <12028987+sureshanaparti@users.noreply.github.com>
* Update framework/cluster/src/main/java/com/cloud/cluster/dao/ManagementServerHostDao.java
Co-authored-by: Rodrigo D. Lopez <19981369+RodrigoDLopez@users.noreply.github.com>
* Update framework/cluster/src/main/java/com/cloud/cluster/ClusterManager.java
Co-authored-by: Rodrigo D. Lopez <19981369+RodrigoDLopez@users.noreply.github.com>
* Update api/src/main/java/org/apache/cloudstack/api/response/ManagementServerResponse.java
Co-authored-by: Daniel Augusto Veronezi Salvador <38945620+GutoVeronezi@users.noreply.github.com>
* Update api/src/main/java/org/apache/cloudstack/api/response/ManagementServerResponse.java
Co-authored-by: Daniel Augusto Veronezi Salvador <38945620+GutoVeronezi@users.noreply.github.com>
* Update engine/schema/src/main/java/com/cloud/host/dao/HostDao.java
Co-authored-by: Daniel Augusto Veronezi Salvador <38945620+GutoVeronezi@users.noreply.github.com>
* Update framework/cluster/src/main/java/com/cloud/cluster/ClusterManager.java
Co-authored-by: Daniel Augusto Veronezi Salvador <38945620+GutoVeronezi@users.noreply.github.com>
* Update framework/cluster/src/main/java/com/cloud/cluster/ClusterManager.java
Co-authored-by: Daniel Augusto Veronezi Salvador <38945620+GutoVeronezi@users.noreply.github.com>
* Update server/src/main/java/com/cloud/server/StatsCollector.java
Co-authored-by: Daniel Augusto Veronezi Salvador <38945620+GutoVeronezi@users.noreply.github.com>
* Update framework/cluster/src/main/java/com/cloud/cluster/ClusterManager.java
Co-authored-by: Daniel Augusto Veronezi Salvador <38945620+GutoVeronezi@users.noreply.github.com>
* Update framework/cluster/src/main/java/com/cloud/cluster/ClusterManager.java
Co-authored-by: Daniel Augusto Veronezi Salvador <38945620+GutoVeronezi@users.noreply.github.com>
* Update framework/cluster/src/main/java/com/cloud/cluster/dao/ManagementServerHostDao.java
Co-authored-by: Daniel Augusto Veronezi Salvador <38945620+GutoVeronezi@users.noreply.github.com>
* Update plugins/metrics/src/main/java/org/apache/cloudstack/metrics/MetricsServiceImpl.java
Co-authored-by: Daniel Augusto Veronezi Salvador <38945620+GutoVeronezi@users.noreply.github.com>
* Update plugins/metrics/src/main/java/org/apache/cloudstack/metrics/MetricsServiceImpl.java
Co-authored-by: Daniel Augusto Veronezi Salvador <38945620+GutoVeronezi@users.noreply.github.com>
* Update plugins/metrics/src/main/java/org/apache/cloudstack/metrics/MetricsServiceImpl.java
Co-authored-by: Daniel Augusto Veronezi Salvador <38945620+GutoVeronezi@users.noreply.github.com>
* Update plugins/metrics/src/main/java/org/apache/cloudstack/metrics/MetricsServiceImpl.java
Co-authored-by: Daniel Augusto Veronezi Salvador <38945620+GutoVeronezi@users.noreply.github.com>
* Update plugins/metrics/src/main/java/org/apache/cloudstack/metrics/MetricsServiceImpl.java
Co-authored-by: Daniel Augusto Veronezi Salvador <38945620+GutoVeronezi@users.noreply.github.com>
* Update plugins/metrics/src/main/java/org/apache/cloudstack/metrics/MetricsServiceImpl.java
Co-authored-by: Daniel Augusto Veronezi Salvador <38945620+GutoVeronezi@users.noreply.github.com>
* Update plugins/metrics/src/main/java/org/apache/cloudstack/metrics/MetricsServiceImpl.java
Co-authored-by: Daniel Augusto Veronezi Salvador <38945620+GutoVeronezi@users.noreply.github.com>
* Update plugins/metrics/src/main/java/org/apache/cloudstack/metrics/MetricsServiceImpl.java
Co-authored-by: Daniel Augusto Veronezi Salvador <38945620+GutoVeronezi@users.noreply.github.com>
* Update plugins/metrics/src/main/java/org/apache/cloudstack/metrics/MetricsServiceImpl.java
Co-authored-by: Daniel Augusto Veronezi Salvador <38945620+GutoVeronezi@users.noreply.github.com>
* Update plugins/metrics/src/main/java/org/apache/cloudstack/metrics/MetricsServiceImpl.java
Co-authored-by: Daniel Augusto Veronezi Salvador <38945620+GutoVeronezi@users.noreply.github.com>
* Update plugins/metrics/src/main/java/org/apache/cloudstack/metrics/MetricsServiceImpl.java
Co-authored-by: Daniel Augusto Veronezi Salvador <38945620+GutoVeronezi@users.noreply.github.com>
* Update plugins/metrics/src/main/java/org/apache/cloudstack/metrics/MetricsServiceImpl.java
Co-authored-by: Daniel Augusto Veronezi Salvador <38945620+GutoVeronezi@users.noreply.github.com>
* Update plugins/metrics/src/main/java/org/apache/cloudstack/metrics/MetricsServiceImpl.java
Co-authored-by: Daniel Augusto Veronezi Salvador <38945620+GutoVeronezi@users.noreply.github.com>
* Update server/src/main/java/com/cloud/server/StatsCollector.java
Co-authored-by: Daniel Augusto Veronezi Salvador <38945620+GutoVeronezi@users.noreply.github.com>
* Update server/src/main/java/com/cloud/server/StatsCollector.java
Co-authored-by: Daniel Augusto Veronezi Salvador <38945620+GutoVeronezi@users.noreply.github.com>
* Update server/src/main/java/com/cloud/server/StatsCollector.java
Co-authored-by: Daniel Augusto Veronezi Salvador <38945620+GutoVeronezi@users.noreply.github.com>
* Update plugins/metrics/src/main/java/org/apache/cloudstack/metrics/MetricsServiceImpl.java
* Update plugins/metrics/src/main/java/org/apache/cloudstack/metrics/MetricsServiceImpl.java
* some (more) refactorring suggestions applied
* human readable memory sizes
* rat
* actual collection time instead of query time, improved descriptions
* merge errors fixed
* optional metric values
* javadoc and logging
* names of jmx vars have changed
* vue3-compatibility
* new output parameter type
* lower retention default
* vue3 fixes
* polish comments
* polish comments 2, the reckoning
* note on usage servers
* merge conflict errors
* pollish
* conditional assertion to deal with simulator restart
Co-authored-by: Daan Hoogland <dahn@onecht.net>
Co-authored-by: sureshanaparti <12028987+sureshanaparti@users.noreply.github.com>
Co-authored-by: Rodrigo D. Lopez <19981369+RodrigoDLopez@users.noreply.github.com>
Co-authored-by: Daniel Augusto Veronezi Salvador <38945620+GutoVeronezi@users.noreply.github.com>
Co-authored-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Support for live patching systemVMs and deprecating systemVM.iso. Includes:
- fix systemVM template version
- Include agent.zip, cloud-scripts.tgz to the commons package
- Support for live-patching systemVMs - CPVM, SSVM, Routers
- Fix Unit test
- Remove systemvm.iso dependency
* The following commit:
- refactors logic added to support SystemVM deployment on KVM
- Adds support to copy specific files (required for patching) to the hosts on Xenserver
- Modifies vmops method - createFileInDomr to take cleanup param
- Adds configuratble sleep param to CitrixResourceBase::connect() used to verify if telnet to specifc port is possible (if sleep is 0, then default to _sleep = 10000ms)
- Adds Command/Answer for patch systemVMs on XenServer/Xcp
* - Support to patch SystemVMs - VMWare
- Remove attaching systemvm.iso to systemVMs
- Modify / Refactor VMware start command to copy patch related files to the systemvms
- cleanup
* Commit comprises of:
- remove docker from systemvm template - use containerd as container runtime
- update create-k8s-binaries script to use ctr for all docker operations
- Update userdata sent to the k8s nodes
- update cksnode script, run during patching of the cks/k8s nodes
* Add ssh to k8s nodes details in the Access tab on the UI
* test
* Refactor ca/cert patching logic
* Commit comprises of the following changes:
- Use restart network/VPC API to patch routers
- use livePatch API support patching of only cpvm/ssvm
- add timeout to the keystore setup/import script
* remove all references of systemvm.iso
* Fix keystore-cert-import invocation + refactor cert timeout in CP/SS VMs
* fix script timeout
* Refactor cert patching for systemVMs + update keystore-cert-import script + patch-sysvms script + remove patchSysvmCommand from networkelementcommand
* remove commented code + change core user to cloud for cks nodes
* Update ownership of ssh directory
* NEED TO DISCUSS - add on the fly template conversion as an ExecStartPre action (systemd)
* Add UI changes + move changes from patch file to runcmd
* test: validate performance for template modification during seeding
* create vms folder in cloudstack-commons directory - debian rules
* remove logic for on the fly template convert + update k8s test
* fix syntax issue - causing issue with shared network tests
* Code cleanup
* refactor patching logic - certs
* move logic of fixing rootdiskcontroller from upgrade to kubernetes service
* add livepatch option to restart network & vpc
* smooth upgrade of cks clusters
* Support for live patching systemVMs and deprecating systemVM.iso. Includes:
- fix systemVM template version
- Include agent.zip, cloud-scripts.tgz to the commons package
- Support for live-patching systemVMs - CPVM, SSVM, Routers
- Fix Unit test
- Remove systemvm.iso dependency
* The following commit:
- refactors logic added to support SystemVM deployment on KVM
- Adds support to copy specific files (required for patching) to the hosts on Xenserver
- Modifies vmops method - createFileInDomr to take cleanup param
- Adds configuratble sleep param to CitrixResourceBase::connect() used to verify if telnet to specifc port is possible (if sleep is 0, then default to _sleep = 10000ms)
- Adds Command/Answer for patch systemVMs on XenServer/Xcp
* - Support to patch SystemVMs - VMWare
- Remove attaching systemvm.iso to systemVMs
- Modify / Refactor VMware start command to copy patch related files to the systemvms
- cleanup
* Commit comprises of:
- remove docker from systemvm template - use containerd as container runtime
- update create-k8s-binaries script to use ctr for all docker operations
- Update userdata sent to the k8s nodes
- update cksnode script, run during patching of the cks/k8s nodes
* Add ssh to k8s nodes details in the Access tab on the UI
* test
* Refactor ca/cert patching logic
* Commit comprises of the following changes:
- Use restart network/VPC API to patch routers
- use livePatch API support patching of only cpvm/ssvm
- add timeout to the keystore setup/import script
* remove all references of systemvm.iso
* Fix keystore-cert-import invocation + refactor cert timeout in CP/SS VMs
* fix script timeout
* Refactor cert patching for systemVMs + update keystore-cert-import script + patch-sysvms script + remove patchSysvmCommand from networkelementcommand
* remove commented code + change core user to cloud for cks nodes
* Update ownership of ssh directory
* NEED TO DISCUSS - add on the fly template conversion as an ExecStartPre action (systemd)
* Add UI changes + move changes from patch file to runcmd
* test: validate performance for template modification during seeding
* create vms folder in cloudstack-commons directory - debian rules
* remove logic for on the fly template convert + update k8s test
* fix syntax issue - causing issue with shared network tests
* Code cleanup
* add cgroup config for containerd
* add systemd config for kubelet
* add additional info during image registry config
* address comments
* add temp links of download.cloudstack.org
* address part of the comments
* address comments
* update containerd config - as version has upgraded to 1.5 from 1.4.12 in 4.17.0
* address comments - simplify
* fix vue3 related icon changes
* allow network commands when router template version is lower but is patched
* add internal LB to the list of routers to be patched on network restart with live patch
* add unit tests for API param validations and new helper utilities - file scp & checksum validations
* perform patching only for non-user i.e., system VMs
* add test to validate params
* remove unused import
* add column to domain_router to display software version and support networkrestart with livePatch from router view
* Requires upgrade column to consider package (cloud-scripts) checksum to identify if true/false
* use router software version instead of checksum
* show N/A if no software version reported i.e., in upgraded envs
* fix deb failure
* update pom to official links of systemVM template
* StorPool storage plugin
Adds volume storage plugin for StorPool SDS
* Added support for alternative endpoint
Added option to switch to alternative endpoint for SP primary storage
* renamed all classes from Storpool to StorPool
* Address review
* removed unnecessary else
* Removed check about the storage provider
We don't need this check, we'll get if the snapshot is on StorPool be
its name from path
* Check that current plugin supports all functionality before upgrade CS
* Smoke tests for StorPool plug-in
* Fixed conflicts
* Fixed conflicts and added missed Apache license header
* Removed whitespaces in smoke tests
* Added StorPool plugin jar for Debian
the StorPool jar will be included into cloudstack-agent package for
Debian/Ubuntu
This enables jacoco, which didn't run before with the -P quality due to
missing passing of jacoco arg line to surefire plugin.
This also adds support for jacoco/quality builds using Github action and
posting of the PR coverage data using a new action step.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
