This ensure that fewer mount points are made on hosts for either
primary storagepools or secondary storagepools.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* 4.11:
comment on unencryption
ui: fix create VPC dialog box failure when zone is SG enabled (#2704)
CLOUDSTACK-10381: Fix password reset / reset ssh key with ConfigDrive
isisnot=
extra message
debug message
imports
update without decrypt doesn't work
set unsensitive attributes as not 'Secure'
remove old config artifacts from update path
Changes in PR #2508 have caused network restart to fail in a Nuage setup,
as the new VR takes the same IP as the old one, and the old VR is still running.
Nuage doesn't support multiple VM's having the same IP.
We delay provisioning the interfaces in VSD until the old VR interface is released.
* Create unit test cases for 'ConfigDriveBuilder' class
* add method 'getProgramToGenerateIso' as suggested by rohit and Daan
* fix encoding for base64 to StandardCharsets.US_ASCII
* fix MockServerTest.testIsMockServerCanUpgradeConnectionToSsl()
This is another method that is causing Jenkins to fail for almost a month
Example: A VM that uses managed storage is stopped. The VM is then started on a different host in the same cluster. The Start operation fails.
To get around this issue, you must either start the VM up on the same host or on a host in a different cluster.
The reason is due to a slightly erroneous check in VolumeOrchestrator.prepare.
To solve this issue, we should be checking if the cluster ID changes, not if the host ID changes.
This introduces a new global setting `vm.configdrive.primarypool.enabled` to toggle creation/hosting of config drive iso files on primary storage, the default will be false causing them to be hosted on secondary storage. The current support is limited from hypervisor resource side and in current implementation limited to `KVM` only. The next big change is that config drive is created at a temporary location by management server and shipped to either KVM or SSVM agent via cmd-answer pattern, the data of which is not logged in logs. This saves us from adding genisoimage dependency on cloudstack-agent pkg.
The APIs to reset ssh public key, password and user-data (via update VM API) requires that VM should be shutdown. Therefore, in the refactoring I removed the case of updation of existing ISO. If there are objections I'll re-put the strategy to detach+attach new config iso as a way of updation. In the refactored implementation, the folder name is changed to lower-cased configdrive. And during VM start, migration or shutdown/removal if primary storage is enable for use, the KVM agent will handle cleanup tasks otherwise SSVM agent will handle them.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
When a user shuts down their VM from the guest OS (and VM HA is enabled), the VM just powers itself back on. Our environment is on KVM hosts.
CloudStack does not know the difference between a VM failing or being shutdown from within the guest OS.
This is a major pain point for all our users - especially since they don't pay for VMs when they are shutoff. It is not intuitive for end-users to understand why they can't shutdown VMs from within the guest OS. Especially when they all come from (non-cloudstack) VMware and Hyper-V environments where this is not an issue.
However, if a host fails, we need VM HA to still work.
This PR that creates a configuration option "ha.vm.restart.hostup". With this option set to false, if CloudStack sees a VM shutdown out-of-band, but the host it was on is still online, then it won't power the VM back on. The logic is that since the host is online, it was most likely shutdown from the guest OS.
For when a host actually fails, standard VM HA logic takes over and powers on VMs (if they have VM HA enabled) if the host they were on fails.
If that "ha.vm.restart.hostup" option is true (the default to match current functionality), it works like always, and even in-guest shutdowns of VMs causes CloudStack to power back on the VM.
* Primary Storage count for an account does not decrease when a Data Disk is deleted
When a data disk is created and not attached in a running VM, the "deleteVolume" will not decrement the count for used primary storage in the VMs accounting information. The property that is not being decremented is called "primarystoragetotal"; this information can be retrieved via "listAccounts" API method.
Steps to reproduce this issue:
1 - Create an account, deploy a VM in it
2 - Check the primary storage count for the account with listAccounts API
3 - Create a data disk
4 - Check the primary storage count for the account with listAccounts API
5 - Delete the Data disk
6 - Check the primary storage count for the account with listAccounts API - It is the same as before deleting the data disk (it should not be the same as the value in step 2!)
* formatting and cleanups
* fix imports that were wrongly changed during rebase
This fixes config drive to use VM's user provided host-name instead of
the internal VM instance ID for hostname related config in both
cloudstack and openstack metadata bundled in the ISO.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-9184: Fixes#2631 VMware dvs portgroup autogrowth
This deprecates the vmware.ports.per.dvportgroup global setting.
The vSphere Auto Expand feature (introduced in vSphere 5.0) will take
care of dynamically increasing/decreasing the dvPorts when running out
of distributed ports . But in case of vSphere 4.1/4.0 (If used), as this
feature is not there, the new default value (=> 8) have an impact in the
existing deployments. Action item for vSphere 4.1/4.0: Admin should
modify the global configuration setting "vmware.ports.per.dvportgroup"
from 8 to any number based on their environment because the proposal
default value of 8 would be very less without auto expand feature in
general. The current default value of 256 may not need immediate
modification after deployment, but 8 would be very less which means
admin need to update immediately after upgrade.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This introduces a rolling restart of VRs when networks are restarted
with cleanup option for isolated and VPC networks. A make redundant option is
shown for isolated networks now in UI.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Using a hierarchy of database version rather than a flat
list of them. Adding a new schema upgrade path was really
cumbersome and error-prone, because we needed to maintain
a flat map of versions and their corresponding list of
upgrade paths (`DbUpgrade`). Instead we're using a logical
hierarchy structure of versions:
```
DatabaseVersionHierarchy.builder()
.next("4.0.0" , new Upgrade40to41())
.next("4.0.1" , new Upgrade40to41())
.next("4.0.2" , new Upgrade40to41())
.next("4.1.0" , new Upgrade410to420())
.next("4.1.1" , new Upgrade410to420())
.next("4.2.0" , new Upgrade420to421())
...
.next("4.2.1" , new Upgrade421to430())
.next("4.9.3.0" , new Upgrade4930to41000())
.next("4.10.0.0", new Upgrade41000to41100())
.next("4.11.0.0", new Upgrade41100to41110())
.build();
```
With this change, when we need to add a new version upgrade
path, we only need to add it in correct place in the hierarchy
rather than add that in dozens of places in `_upgradeMap`.
Supporting ConfigDrive user data on L2 networks.
Add UI checkbox to create L2 network offering with config drive.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-10147 Disabled Xenserver Cluster can still deploy VM's. Added code to skip disabled clusters when selecting a host (#2442)
(cherry picked from commit c3488a51db4bce4ec32c09e6fef78193d360cf3f)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-10318: Bug on sorting ACL rules list in chrome (#2478)
(cherry picked from commit 4412563f19ec8b808fe4c79e2baf658507a84873)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-10284:Creating a snapshot from VM Snapshot generates error if hypervisor is not KVM.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-10221: Allow IPv6 when creating a Basic Network (#2397)
Since CloudStack 4.10 Basic Networking supports IPv6 and thus
should be allowed to be specified when creating a network.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
(cherry picked from commit 9733a10ecda5f1af0f2c0fa863fc976a3e710946)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-10214: Unable to remove local primary storage (#2390)
Allow admins to remove primary storage pool.
Cherry-picked from eba2e1d8a1ce4e86b4df144db03e96739da455e5
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* dateutil: constistency of tzdate input and output (#2392)
Signed-off-by: Yoan Blanc <yoan.blanc@exoscale.ch>
Signed-off-by: Daan Hoogland <daan.hoogland@shapeblue.com>
(cherry picked from commit 2ad520282319da9a03061b8c744e51a4ffdf94a2)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-10054:Volume download times out in 3600 seconds (#2244)
(cherry picked from commit bb607d07a97476dc4fb934b3d75df6affba47086)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* When creating a new account (via domain admin) it is possible to select “root admin” as the role for the new user (#2606)
* create account with domain admin showing 'root admin' role
Domain admins should not be able to assign the role of root admin to new users. Therefore, the role ‘root admin’ (or any other of the same type) should not be visible to domain admins.
* License and formatting
* Break long sentence into multiple lines
* Fix wording of method 'getCurrentAccount'
* fix typo in variable name
* [CLOUDSTACK-10259] Missing float part of secondary storage data in listAccounts
* [CLOUDSTACK-9338] ACS not accounting resources of VMs with custom service offering
ACS is accounting the resources properly when deploying VMs with custom service offerings. However, there are other methods (such as updateResourceCount) that do not execute the resource accounting properly, and these methods update the resource count for an account in the database. Therefore, if a user deploys VMs with custom service offerings, and later this user calls the “updateResourceCount” method, it (the method) will only account for VMs with normal service offerings, and update this as the number of resources used by the account. This will result in a smaller number of resources to be accounted for the given account than the real used value. The problem becomes worse because if the user starts to delete these VMs, it is possible to reach negative values of resources allocated (breaking all of the resource limiting for accounts). This is a very serious attack vector for public cloud providers!
* [CLOUDSTACK-10230] User should not be able to use removed “Guest OS type” (#2404)
* [CLOUDSTACK-10230] User is able to change to “Guest OS type” that has been removed
Users are able to change the OS type of VMs to “Guest OS type” that has been removed. This becomes a security issue when we try to force users to use HVM VMs (Meltdown/Spectre thing). A removed “guest os type” should not be usable by any users in the cloud.
* Remove trailing lines that are breaking build due to checkstyle compliance
* Remove unused imports
* fix classes that were in the wrong folder structure
* Updates to capacity management
This moves db upgrade paths and checks around a new systemvmtemplate
for 4.11.1. The new systemvmtemplate compared to 4.11.0 template
is slightly smaller and has meltdown/spectre fixes among few other
security fixes from Debian and changes to cloud-early-config.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This adds support for XenServer 7.3 and 7.4, and XCP-ng 7.4 version as hypervisor hosts. Fixes#2523.
This also fixes the issue of 4.11 VRs stuck in starting for up-to 10mins, before they come up online.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* [CLOUDSTACK-10323] Allow changing disk offering during volume migration
This is a continuation of work developed on PR #2425 (CLOUDSTACK-10240), which provided root admins an override mechanism to move volumes between storage systems types (local/shared) even when the disk offering would not allow such operation. To complete the work, we will now provide a way for administrators to enter a new disk offering that can reflect the new placement of the volume. We will add an extra parameter to allow the root admin inform a new disk offering for the volume. Therefore, when the volume is being migrated, it will be possible to replace the disk offering to reflect the new placement of the volume.
The API method will have the following parameters:
* storageid (required)
* volumeid (required)
* livemigrate(optional)
* newdiskofferingid (optional) – this is the new parameter
The expected behavior is the following:
* If “newdiskofferingid” is not provided the current behavior is maintained. Override mechanism will also keep working as we have seen so far.
* If the “newdiskofferingid” is provided by the admin, we will execute the following checks
** new disk offering mode (local/shared) must match the target storage mode. If it does not match, an exception will be thrown and the operator will receive a message indicating the problem.
** we will check if the new disk offering tags match the target storage tags. If it does not match, an exception will be thrown and the operator will receive a message indicating the problem.
** check if the target storage has the capacity for the new volume. If it does not have enough space, then an exception is thrown and the operator will receive a message indicating the problem.
** check if the size of the volume is the same as the size of the new disk offering. If it is not the same, we will ALLOW the change of the service offering, and a warning message will be logged.
We execute the change of the Disk offering as soon as the migration of the volume finishes. Therefore, if an error happens during the migration and the volume remains in the original storage system, the disk offering will keep reflecting this situation.
* Code formatting
* Adding a test to cover migration with new disk offering (#4)
* Adding a test to cover migration with new disk offering
* Update test_volumes.py
* Update test_volumes.py
* fix test_11_migrate_volume_and_change_offering
* Fix typo in Java doc
