Remove maven standard module (which only a few were using) and get ride of maven customization for the projects structure.
- moved all directories to src/main/java, src/main/resources, src/main/scripts, src/test/java, src/test/resources
- grep scan to search for src/com and src/org left over
- grep for <project>/scripts to fix pom.xml configuration
- remove custom <build> configuration in pom.xml
Signed-off-by: Marc-Aurèle Brothier <m@brothier.org>
As discovered and discussed in #2376, adding some delay after stopping
the VM and reverting VM snapshot passes the
`test_change_service_offering_for_vm_with_snapshots` test case. The
suspect here is userVMDao or background vmsync that may not update
the VM state to PowerOff.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This fixes regression failures seen in Trillian, fixes NPEs that cause Travis related failures.
This also removes the aria2 dependency from rpms that require users to enable/install epel-release.
This finally updates the checksums for 4.11 systemvmtemplates in db upgrade path.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Allowed zone-wide primary storage based on a custom plug-in to be added via the GUI in a KVM-only environment (previously this only worked for XenServer and VMware)
Added support for root disks on managed storage with KVM
Added support for volume snapshots with managed storage on KVM
Enable creating a template directly from a volume (i.e. without having to go through a volume snapshot) on KVM with managed storage
Only allow the resizing of a volume for managed storage on KVM if the volume in question is either not attached to a VM or is attached to a VM in the Stopped state.
Included support for Reinstall VM on KVM with managed storage
Enabled offline migration on KVM from non-managed storage to managed storage and vice versa
Included support for online storage migration on KVM with managed storage (NFS and Ceph to managed storage)
Added support to download (extract) a managed-storage volume to a QCOW2 file
When uploading a file from outside of CloudStack to CloudStack, set the min and max IOPS, if applicable.
Included support for the KVM auto-convergence feature
The compression flag was actually added in version 1.0.3 (1000003) as opposed to version 1.3.0 (1003000) (changed this to reflect the correct version)
On KVM when using iSCSI-based managed storage, if the user shuts a VM down from the guest OS (as opposed to doing so from CloudStack), we need to pass to the KVM agent a list of applicable iSCSI volumes that need to be disconnected.
Added a new Global Setting: kvm.storage.live.migration.wait
For XenServer, added a check to enforce that only volumes from zone-wide managed storage can be storage motioned from a host in one cluster to a host in another cluster (cannot do so at the time being with volumes from cluster-scoped managed storage)
Don’t allow Storage XenMotion on a VM that has any managed-storage volume with one or more snapshots.
Enabled for managed storage with VMware: Template caching, create snapshot, delete snapshot, create volume from snapshot, and create template from snapshot
Added an SIOC API plug-in to support VMware SIOC
When starting a VM that uses managed storage in a cluster other than the one it last was running in, we need to remove the reference to the iSCSI volume from the original cluster.
Added the ability to revert a volume to a snapshot
Enabled cluster-scoped managed storage
Added support for VMware dynamic discovery
Extending Config Drive support
* Added support for VMware
* Build configdrive.iso on ssvm
* Added support for VPC and Isolated Networks
* Moved implementation to new Service Provider
* UI fix: add support for urlencoded userdata
* Add support for building systemvm behind a proxy
Co-Authored-By: Raf Smeets <raf.smeets@nuagenetworks.net>
Co-Authored-By: Frank Maximus <frank.maximus@nuagenetworks.net>
Co-Authored-By: Sigert Goeminne <sigert.goeminne@nuagenetworks.net>
CloudStack volumes and templates are one single virtual disk in case of XenServer/XCP and KVM hypervisors since the files used for templates and volumes are virtual disks (VHD, QCOW2). However, VMware volumes and templates are in OVA format, which are archives that can contain a complete VM including multiple VMDKs and other files such as ISOs. And currently, Cloudstack only supports Template creation based on OVA files containing a single disk. If a user creates a template from a OVA file containing more than 1 disk and launches an instance using this template, only the first disk is attached to the new instance and other disks are ignored.
Similarly with uploaded volumes, attaching an uploaded volume that contains multiple disks to a VM will result in only one VMDK to being attached to the VM.
FS: https://cwiki.apache.org/confluence/display/CLOUDSTACK/Support+OVA+files+containing+multiple+disks
This behavior needs to be improved in VMWare to support OVA files with multiple disks for both uploaded volumes and templates. i.e. If a user creates a template from a OVA file containing more than 1 disk and launches an instance using this template, the first disk should be attached to the new instance as the ROOT disk and volumes should be created based on other VMDK disks in the OVA file and should be attached to the instance.
Signed-off-by: Abhinandan Prateek <abhinandan.prateek@shapeblue.com>
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This fixes regression introduced in PR #2295:
- Pass assign=true to fetch new public IP
- Use wait_until instead of sleep+wait in tests
- Loop through list of public IP ranges to match the systemvm gateway
- Fix potential NPE seen when adding simulator host(s)
- Removes aria2 installation from setup_agent.sh using yum, it's already
dependency for cloudstack-agent package
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This PR introduces several features and fixes some bugs:
- account tags feature
- fixed resource tags bugs which happened during tags search (found wrong entries because of mysql string to number translation - see #905, but this PR does more and fixes also resource access - vulnerability during list resource tags)
- some marvin improvements (speed, sanity)
Improved resource tags code:
1. Enhanced listTags security
2. Added support for account tags (account tags are required to support tags common for all users of an account)
3. Improved the tag management code (refactoring and cleanup)
Marvin:
1. Fixed Marvin wait timeout between async pools. To decrease polling interval and improve CI speed.
2. Fixed /tmp/ to /tmp in zone configuration files.
3. Fixed + to os.path.join in log class.
4. Fixed + to os.path.join in deployDataCenter class.
5. Fixed typos in tag tests.
6. Modified Tags base class delete method.
Deploy Datacenter script:
1. Improved deployDatacenter. Added option logdir to specify where script places results of evaluation.
ConfigurationManagerImpl:
1. Added logging to ConfigurationManagerImpl to log when vlan is not found. Added test stubs for tags. Found accidental exception during simulator running after CI.
tests_tags.py:
1. Fixed stale undeleted tags.
2. Changed region:India to scope:TestName.
This feature allows using templates and ISOs avoiding secondary storage as intermediate cache on KVM. The virtual machine deployment process is enhanced to supported bypassed registered templates and ISOs, delegating the work of downloading them to primary storage to the KVM agent instead of the SSVM agent.
Template and ISO registration:
- When hypervisor is KVM, a checkbox is displayed with 'Direct Download' label.
- API methods registerTemplate and registerISO are both extended with this new parameter directdownload.
- On template or ISO registration, no download job is sent to SSVM agent, CloudStack would only persist an entry on template_store_ref indicating that template or ISO has been marked as 'Direct Download' (bypassing Secondary Storage). These entries are persisted as:
template_id = Template or ISO id on vm_template table
store_id NULL
download_state = BYPASSED
state = Ready
(Note: these entries allow users to deploy virtual machine from registered templates or ISOs)
- An URL validation command is sent to a random KVM host to check if template/ISO location can be reached. Metalink are also supported by this feature. In case of a metalink, it is fetched and URL check is performed on each of its URLs.
- Checksum should be provided as indicated on #2246: {ALGORITHM}CHKSUMHASH
- After template or ISO is registered, it would be displayed in the UI
Virtual machine deployment:
When a 'Direct Download' template is selected for deployment, CloudStack would delegate template downloading to destination storage pool via destination host by a new pluggable download manager.
Download manager would handle template downloading depending on URL protocol. In case of HTTP, request headers can be set by the user via vm_template_details. Those details should be persisted as:
Key: HTTP_HEADER
Value: HEADERNAME:HEADERVALUE
In case of HTTPS, a new API method is added uploadTemplateDirectDownloadCertificate to allow user importing a client certificate into all KVM hosts' keystore before deployment.
After template or ISO is downloaded to primary storage, usual entry would be persisted on template_spool_ref indicating the mapping between template/ISO and storage pool.
Steps to reproduce issue
Deploy a VM
Take snapshot of the root volume
Delete the snapshot
Before the garbage collector has run, shutdown the VM and assign the VM to other user.
When garage collector executes NPE shows in the logs.
This happens when the root disk size is overridden. The primary storage limit check should be performed based on overridden size instead of template size. Enabled root disk resize tests to run on simulator as well.
This feature allow admins to dedicate a range of public IP addresses to the SSVM and CPVM, such that they can be subject to specific external firewall rules. The option to dedicate a public IP range to the System VMs (SSVM & CPVM) is added to the createVlanIpRange API method and the UI.
Solution:
Global setting 'system.vm.public.ip.reservation.mode.strictness' is added to determine if the use of the system VM reservation is strict (when true) or preferred (false), false by default.
When a range has been dedicated to System VMs, CloudStack should apply IPs from that range to
the public interfaces of the CPVM and the SSVM depending on global setting's value:
If the global setting is set to false: then CloudStack will use any unused and unreserved public IP
addresses for system VMs only when the pool of reserved IPs has been exhausted
If the global setting is set to true: then CloudStack will fail to deploy the system VM when the pool
of reserved IPs has been exhausted, citing the lack of available IPs.
UI Changes
Under Infrastructure -> Zone -> Physical Network -> Public -> IP Ranges, button 'Account' label is refactored to 'Set reservation'.
When that button is clicked, dialog displayed is also refactored, including a new checkbox 'System VMs' which indicates if range should be dedicated for CPVM and SSVM, and a note indicating its usage.
When clicking on button for any created range, UI dialog displayed indicates whether IP range is dedicated for system vms or not.
While creating the response object for the 'listDomain' API, several database calls are triggered to fetch details like parent domain, project limit, IP limit, etc. These database calls are triggered for each record found in the main fetch query, which is causing the response to slow down.
Fix:
The database transactions are reduced to improve response of the Listdomain API
In CLOUDSTACK-9886, we are reading ping.interval and ping.timeout using configdao which involves direct reading of DB. So, replaced it with ConfigKey based approach.
Using cloudmonkey, when invoking the update template api call, it does not display the isdynamicallyscalable field as part of its template response.
fix done:
org.apache.cloudstack.api.response.TemplateResponse isdynamicallyscalable field is now populated in the server/src/com/cloud/api/query/dao/TemplateJoinDaoImpl.java.newUpdateResponse method.
Unit test:
the Unit test server/test/com/cloud/api/query/dao/TemplateJoinDaoImplTest.java testNewUpdateResponse() verifies that the TemplateResponse is populated correctly.
Marvin test:
the Marvin nosetest integration/smoke/test_templates.py test_02_edit_template(self) confirms that the template_response.isdynamicallyscalable field gets populated with the correct user data.
Test scenario:
Using cloudmonkey, when invoking the 'update template' API call, it should now display the isdynamicallyscalable field as part of its template response.
Description: For Volumes on Secondary Storage, (Uploaded Volume) the usage is not accounted for.
The fix is implemented as follows:
A new Usage Type is added for the Volume on secondary storage : VOLUME_SECONDARY (id=26)
A new storage type, 'Volume' is defined.
When a volume is uploaded and the usage server executes next,entry will be added to the usage_storage helper table for all the volumes uploaded since the Usage server executed last.
When the uploaded volume is attached, the 'deleted' column in the usage_storage table is set to the time-stamp when the volume was deleted
2 entries will be added to the cloud_usage table with usage_type=26 and usage_type=6 (Volume usage on primary). One for the duration the volume was on primary and other for the duration it was on secondary.
Entry is added to the helper table volume_usage for accounting for the primary storage.Next execution of the usage server and on-wards, usage entry for usage_type=6 only will be added.
This includes test related fixes and code review fixes based on
reviews from @rafaelweingartner, @marcaurele, @wido and @DaanHoogland.
This also includes VMware disk-resize limitation bug fix based on comments
from @sateesh-chodapuneedi and @priyankparihar.
This also includes the final changes to systemvmtemplate and fixes to
code based on issues found via test failures.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This fixes test failures around VMware with the new systemvmtemplate.
In addition:
- Does not skip rVR related test cases for VMware
- Removes rc.local
- Processes unprocessed cmd_line.json
- Fixed NPEs around VMware tests/code
- On VMware, use udevadm to reconfigure nic/mac address than rebooting
- Fix proper acpi shutdown script for faster systemvm shutdowns
- Give at least 256MB of swap for VRs to avoid OOM on VMware
- Fixes smoke tests for environment related failures
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
On XenServer, both redundant router's vifs were getting deleted when any
PF rule is removed from any of the acquired public IPs. This fix
ensures that lastIp is set to `false` when processed by hypervisor
resources to avoid removing of VIFs when VPCs have any source nat IP.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Several systemvmtemplate optimizations
- Uses new macchinina template for running smoke tests
- Switch to latest Debian 9.3.0 release for systemvmtemplate
- Introduce a new `get_test_template` that uses tiny test template
such as macchinina as defined test_data.py
- rVR related fixes and improvements
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Refactors and simplifies systemvm codebase file structures keeping
the same resultant systemvm.iso packaging
- Password server systemd script and new postinit script that runs
before sshd starts
- Fixes to keepalived and conntrackd config to make rVRs work again
- New /etc/issue featuring ascii based cloudmonkey logo/message and
systemvmtemplate version
- SystemVM python codebase linted and tested. Added pylint/pep to
Travis.
- iptables re-application fixes for non-VR systemvms.
- SystemVM template build fixes.
- Default secondary storage vm service offering boosted to have 2vCPUs
and RAM equal to console proxy.
- Fixes to several marvin based smoke tests, especially rVR related
tests. rVR tests to consider 3*advert_int+skew timeout before status
is checked.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This ports the S2S config test by @swill from #2190 with additional
changes to make robust and environment agnostic.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Refactor cloud-early-config and make appliance specific scripts
- Make patching work without requiring restart of appliance and remove
postinit script
- Migrate to systemd, speedup booting/loading
- Takes about 5-15s to boot on KVM, and 10-30seconds for VMware and XenServer
- Appliance boots and works on KVM, VMware, XenServer and HyperV
- Update Debian9 ISO url with sha512 checksum
- Speedup console proxy service launch
- Enable additional kernel modules
- Remove unknown ssh key
- Update vhd-util URL as previous URL was down
- Enable sshd by default
- Use hostnamectl to add hostname
- Disable services by default
- Use existing log4j xml, patching not necessary by cloud-early-config
- Several minor fixes and file refactorings, removed dead code/files
- Removes inserv
- Fix dnsmasq config syntax
- Fix haproxy config syntax
- Fix smoke tests and improve performance
- Fix apache pid file path in cloud.monitoring per the new template
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
The `assignDedicateIpAddress` previously had marked the newly fetched
IP as allocated but now it does not do that. This fails for VPCs
where SNATs IP are retained as allocating and not allocated after
creation.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This feature allows CloudStack administrators to create layer 2 networks on CloudStack. As these networks are purely layer 2, they don't require IP addresses or Virtual Router, only VLAN is necessary (provided by administrator or assigned by CloudStack). Also, network services should be handled externally, e.g. DNS, DHCP, as they are not provided by L2 networks.
As a consequence, a new Guest Network type is created within CloudStack: L2
Description:
Network offerings and networks support new guest type: L2.
L2 Network offering creation allows administrator to select Specify VLAN or let CloudStack assign it dynamically.
L2 Network creation allows administrator to specify VLAN tag (if network offerings allows it) or simply create network.
VM deployments on L2 networks:
VMs should not IP addresses or any network service
No Virtual Router deployed on network
If Specify VLAN = true for network offering, network gets implemented using a dynamically assigned VLAN
UI changes
A new button is added on Networks tab, available for admins, to allow L2 networks creation
* CLOUDSTACK-9972: Enhance listVolume API to include physical size and utilization.
Also fixed pool, cluster and pod info
* CLOUDSTACK-9972: Fix volume_view and duplicate API constant
* CLOUDSTACK-9972: Backport Do not allow vms to be deployed on hosts that are in disabled pod
* CLOUDSTACK-9972: Fix localization missing keys
* CLOUDSTACK-9972: Fix sql path
