Handle private gateways more reliablyWhen initialising a VPC router we need to know which IP/device corresponds to a private gateway. This is to solve a problem when stop/starting a VPC router (which gets the private gateway config as a guest network and as a result breaks the functionality). You read it right, the private gateway is sent as type=guest after reboot and type=public initially.
Before this change, you could add a private gw to a running router but you couldn't restart it (it would mix up the tiers). Now the private gateway is detected properly and it works just fine.
Booting without private gateway:
```
root@r-167-VM:~# cat /etc/cloudstack/cmdline.json
{
"config": {
"baremetalnotificationapikey": "V2l1u3wKJVan01h8kq63-5Y5Ia3VLEW1v_Z6i-31QIRJXlt5vkqaqf6DVcdK0jP3u79SW6X9pqJSLSwQP2c2Rw",
"baremetalnotificationsecuritykey": "OXI16srCrxFBi-xOtEwcYqwLlMfSFTlTg66YHtXBBqR7HNN1us3HP5zWOKxfVmz4a3C1kUNLPrUH13gNmZlu4w",
"disable_rp_filter": "true",
"dns1": "8.8.8.8",
"domain": "cs2cloud",
"eth0ip": "169.254.0.42",
"eth0mask": "255.255.0.0",
"host": "192.168.22.61",
"name": "r-167-VM",
"port": "8080",
"privategateway": "None",
"redundant_router": "false",
"template": "domP",
"type": "vpcrouter",
"vpccidr": "10.0.0.0/24"
},
"id": "cmdline"
```
Booting with private gateway:
```
root@r-167-VM:~# cat /etc/cloudstack/cmdline.json
{
"config": {
"baremetalnotificationapikey": "V2l1u3wKJVan01h8kq63-5Y5Ia3VLEW1v_Z6i-31QIRJXlt5vkqaqf6DVcdK0jP3u79SW6X9pqJSLSwQP2c2Rw",
"baremetalnotificationsecuritykey": "OXI16srCrxFBi-xOtEwcYqwLlMfSFTlTg66YHtXBBqR7HNN1us3HP5zWOKxfVmz4a3C1kUNLPrUH13gNmZlu4w",
"disable_rp_filter": "true",
"dns1": "8.8.8.8",
"domain": "cs2cloud",
"eth0ip": "169.254.2.227",
"eth0mask": "255.255.0.0",
"host": "192.168.22.61",
"name": "r-167-VM",
"port": "8080",
"privategateway": "10.201.10.1",
"redundant_router": "false",
"template": "domP",
"type": "vpcrouter",
"vpccidr": "10.0.0.0/24"
},
"id": "cmdline"
```
And:
```
cat cmdline
vpccidr=10.0.0.0/24 domain=cs2cloud dns1=8.8.8.8 privategateway=10.201.10.1 template=domP name=r-167-VM eth0ip=169.254.2.227 eth0mask=255.255.0.0 type=vpcrouter disable_rp_filter=true baremetalnotificationsecuritykey=OXI16srCrxFBi-xOtEwcYqwLlMfSFTlTg66YHtXBBqR7HNN1us3HP5zWOKxfVmz4a3C1kUNLPrUH13gNmZlu4w baremetalnotificationapikey=V2l1u3wKJVan01h8kq63-5Y5Ia3VLEW1v_Z6i-31QIRJXlt5vkqaqf6DVcdK0jP3u79SW6X9pqJSLSwQP2c2Rw host=192.168.22.61 port=8080
```
Logs:
```
2016-02-24 20:08:45,723 DEBUG [c.c.n.r.VpcVirtualNetworkApplianceManagerImpl] (Work-Job-Executor-4:ctx-458d4c52 job-1402/job-1403 ctx-d5355fca) (logid:5772906c) Set privategateway field in cmd_line.json to 10.201.10.1
```
* pr/1474:
Handle private gateways more reliably
Add private gateway IP to router initialization config
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9287 - Fix unique mac address per rVPC routerThis is work by @wilderrodrigues, see PR #1413 It contains important fixes and I think it needs to be included so I send the PR again.
* pr/1483:
CLOUDSTACK-9287 - Improve test by checking if pvt gw is removed and fix typos
CLOUDSTACK-9287 - Fix RVR public interface
CLOUDSTACK-9287 - Add integration test to cover the private gateway related changes
CLOUDSTACK-9287 - Refactor the interface state configuration
CLOUDSTACK-9287 - Check if the nic profile has already been removed from a certain router
CLOUDSTACK-9287 - Bring up the private gw interface on state change to master
CLOUDSTACK-9287 - Make sure private gw interface is not used for default gw
CLOUDSTACK-9287 - Add integration test to cover the private gw interface/mac address issues
CLOUDSTACK-9287 - Put private gateway interface down on backup router
CLOUDSTACK-9287 - Generate new mac address if router is redundant and nic profile exists
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-8847: ListServiceOfferings is returning incompatible tagged offerings when called with VM idWhen calling listServiceOfferings with VM id as parameter. It is returning incompatible tagged offerings. It should only list all compatible tagged offerings. Compatible means the new service offering should contain all the tags of the existing service offering(Existing offering SUBSET of new offering). If that is the case It should list in the result and can be upgraded to that offering.
* pr/1321:
CLOUDSTACK-8847: ListServiceOfferings is returning incompatible tagged offerings when called with VM id
Signed-off-by: Will Stevens <williamstevens@gmail.com>
[4.7] vmware: improve support for disks- Improve disk chain usage while attaching, migrating disks
- Gets root disk controller based diskDeviceBusName from volume's chain info
* pr/1365:
vmware: improve support for disks
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9349: Enable root disk detach for KVM with new Marvin testsThis PR addresses the KVM detach/attach ROOT disks from VMs (CLOUDSTACK-9349). In short, this allows the KVM Hypervisor, and I added the Simulator as a valid hypervisor for ease of development and testing of marvin, to detach a root volume and the reattach a root volume using the deviceid=0 flag to the attachVolume API. I have also written a marvin integration test that verifies this feature works for both KVM and the Simulator.
Below is the marvin results files of the full marvin test_volumes.py. All tests pass, including the new root detach/attach, on our KVM lab running with the patches in this PR.
[test_volumes_KIR4G3.zip](https://github.com/apache/cloudstack/files/223799/test_volumes_KIR4G3.zip)
* pr/1500:
Removed sleeps and used validateList as requested.
Added required_hardware="false" attr above test_02_root_volume_attach_detach
Modified test_volumes.py to include a hypervisor test for root attach/detach testing
Let hypervisor type KVM and Simulator detach root volumes. Updated test_volumes.py to include a test for detaching and reattaching a root volume from a vm. I also had to update base.py to allow attach_volume to have the parameter deviceid to be passed as needed.
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Updated test_volumes.py to include a test for detaching and reattaching a root volume from a vm. I also had to update base.py to allow attach_volume to have the parameter deviceid to be passed as needed.
- Improve disk chain usage while attaching, migrating disks
- Gets root disk controller based diskDeviceBusName from volume's chain info
- Refactor and move VirtualMachineDiskInfo to cloud-utils
- Allows mixing of scsi controller types
- Fixes a NPE case with map passed as null, for example in case of detach volume
command
- Use a osdefault translator that allow use of recent os types added (enums of
which) are not available in the sdk
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- In case of redundant VPCs, the ACL items are revoked in the first iteration. Since the econd iteration
is needed in order to remove the private network, we have to check if the nic profile is gone before trying
to revoke the ACL items again, which would throw a NPE.
- Some variable extraction in order to ease debugging.
Add ability to download templates in SwiftThis PR adds the ability to download templates when using Swift as a secondary storage. Uses the "temp_url" feature of Swift so that tempates can be downloaded without authenticaiton.
* pr/1332:
Add ability to download templates in Swift
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9132: API createVolume takes empty string for name parameterSteps to Reproduce:
================
Create a volume using createVolume API where parameter name is empty.
It creates a volume with empty name.
But the name parameter is mandatory.(Issue)
Expected Behaviour:
================
It shouldn't create a volume with an empty name. Error should be returned.
Solution:
=======
Added a condition to check in case of empty string. If the name is an empty string, it generates a random name for the volume. Made the name field optional in UI as well as in API.
* pr/1319:
CLOUDSTACK-9132: API createVolume takes empty string for name parameter
Signed-off-by: Remi Bergsma <github@remi.nl>
NicProfileHelperImpl NullpointerException when ipVO is nullWhen a VPC has a private gateway, and one would like to restart the VPC with **cleanup** it would fail.
This PR adds a NullPointer check and verifies it with an integration test.
```
test_01_vpc_privategw_acl (integration.smoke.test_privategw_acl.TestPrivateGwACL) ... === TestName: test_01_vpc_privategw_acl | Status : SUCCESS ===
ok
test_02_vpc_privategw_static_routes (integration.smoke.test_privategw_acl.TestPrivateGwACL) ... === TestName: test_02_vpc_privategw_static_routes | Status : SUCCESS ===
ok
test_03_vpc_privategw_restart_vpc_cleanup (integration.smoke.test_privategw_acl.TestPrivateGwACL) ... === TestName: test_03_vpc_privategw_restart_vpc_cleanup | Status : SUCCESS ===
ok
test_04_rvpc_privategw_static_routes (integration.smoke.test_privategw_acl.TestPrivateGwACL) ... === TestName: test_04_rvpc_privategw_static_routes | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 4 tests in 2945.055s
OK
```
* pr/1328:
Add integration test for restartVPC with cleanup, and Private Gateway enabled.
Nullpointer Exception in NicProfileHelperImpl
Signed-off-by: Remi Bergsma <github@remi.nl>
[4.7] FIX Site2SiteVPN on redundant VPCThis PR:
- fixes the inability to setup more than one Site2Site VPN connection from a VPC
- fixes starting of Site2Site VPN on redundant VPC
- fixes Site2Site VPN state checking on redundant VPC
- improves the vpc_vpn test to allow multple hypervisors
- adds an integration test for Site2Site VPN on redundant VPC
Tested it on 4.7 single Xen server zone:
command:
```
nosetests --with-marvin --marvin-config=/data/shared/marvin/mct-zone1-xen1.cfg -a tags=advanced,required_hardware=true /tmp/test_vpc_vpn.py
```
results:
```
Test Site 2 Site VPN Across redundant VPCs ... === TestName: test_01_redundant_vpc_site2site_vpn | Status : SUCCESS ===
ok
Test Remote Access VPN in VPC ... === TestName: test_01_vpc_remote_access_vpn | Status : SUCCESS ===
ok
Test Site 2 Site VPN Across VPCs ... === TestName: test_01_vpc_site2site_vpn | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 3 tests in 1490.076s
OK
```
also performed numerous manual inspections of state of VPN connections and connectivity between VPC's
* pr/1276:
Fix unable to setup more than one Site2Site VPN Connection
FIX S2S VPN rVPC: Check only redundant routers in state MASTER
PEP8 of integration/smoke/test_vpc_vpn
Add S2S VPN test for Redundant VPC
Make integration/smoke/test_vpc_vpn Hypervisor independant
FIX VPN: non-working ipsec commands
Signed-off-by: Remi Bergsma <github@remi.nl>
CLOUDSTACK-6485 prevent ip asignment of private gw ifacePrevent ipaddress asignment of gateway to gateway-interface on vpc router by setting vpcid to null in network. This was fixed in 4.4 by 1f209ff226a24979cf3a43ce0c02e05c84dd4dc2, reimplemented for 4.7
* pr/1299:
CLOUDSTACK-6485 prevent ip asignment of private gw iface
Signed-off-by: Remi Bergsma <github@remi.nl>
Added conditions to check if the name is empty or blank.
If it is empty or blank, then it generates a random name.
Made the name field as optional in UI as well as in API.
Added required unit tests.
Prevent ipaddress asignment of gateway to gateway-interface on vpc router by setting vpcid to null in network
Was fixed in 4.4 by 1f209ff226a24979cf3a43ce0c02e05c84dd4dc2
Reimplemented for 4.7
* 4.6:
[UI] bug fix: Delete added ACL lists is not available for Domain Admin and normal users
CLOUDSTACK-4787: Allow users to select disk controller for VM/template
CLOUDSTACK-4787 Allow selection of scsi controller type in vSphere
[4.6] CLOUDSTACK-4787 - vmware diskcontrollersSame as #1131 (see this for screenshots etc)
* pr/1132:
CLOUDSTACK-4787: Allow users to select disk controller for VM/template
CLOUDSTACK-4787 Allow selection of scsi controller type in vSphere
Signed-off-by: Daan Hoogland <daan@onecht.net>
CLOUDSTACK-4374 - As a Developer I want to have HA enabled for routers that are part or a redundant network or VPCThis PR fixes the issue we were facing with crashed redundant routers not being picked up by the HA monitor due to an IF statement in the code.
* Redundant Routers are not the same as Haigh Available. Having a router HA is actually saying that the given router will be controlled by the High Availability monitor. Hence fix any problem we might face.
* pr/1222:
CLOUDSTACK-4374 - Adds HA capabilities to redundant routers
Signed-off-by: Remi Bergsma <github@remi.nl>
CLOUDSTACK-9086: ACS allows to create isolated networks with invalide gateway IP address - Fixed and Test cases added
Problem: There was no check for the network and broadcast IP addresses in the case where we provide the gateway and netmask while creating the isolated network. As a result the provided IP gets assigned to the eth0 interface of the VR.
Note: This is in continuation of PR #1125 which I closed.
* pr/1188:
CLOUDSTACK-9086: ACS allows to create isolated networks with invalide gateway IP address - Fixed and Test cases added
Signed-off-by: Remi Bergsma <github@remi.nl>
CLOUDSTACK-9138 - Adds multiple providers back to VPC implementation - It is need and already allowed/used in the current implementation. For example, the Default [redundant] VPC offerings use two LB providers. If we cannot create offerings with 2 LB providers, the whole internal loadbalancer implementation won't work.
* pr/1215:
CLOUDSTACK-9138 - Adds multiple providers back to VPC implementation
Signed-off-by: Remi Bergsma <github@remi.nl>
[4.7] CLOUDSTACK-9129: list vpc routers by keyword in Infrastructure -> Virtual Routers
and two more changes:
(1) add network name/vpc name in the listRouters response
(2) add network name/vpc id, vpc name in the router details page
* pr/1197:
CLOUDSTACK-9129: list vpc routers by keyword in Infrastructure -> Virtual Routers
Signed-off-by: Remi Bergsma <github@remi.nl>
- Redundant Routers are not the same as Haigh Available.
Having a router HA is actually saying that the given router will be controlled by the High Availability monitor.
Hence fix any problem we might face.
- It is need and already allowed/used in the current implementation. For example, the Default [redundant] VPC offerings use
two LB providers. If we cannot create offerings with 2 LB providers, the whole internal loadbalancer implementation won't work
* 4.6:
CLOUDSTACK-9106 - Makes Enum name compliant with Java code conventions.
CLOUDSTACK-9106 - Adds a test to cover the changes in the applyVpnUsers() method
CLOUDSTACK-9106 - Makes the router commands call more consistent.
CLOUDSTACK-9106 - Enables private gateway tests on Redundant VPCs
CLOUDSTACK-9106 - Refactor the createPrivateNicProfileForGateway() method
CLOUDSTACK-9106 - Reduces the amount of iterations through the routers of a VPC
Add support for not (re)starting server after cloud-setup-management.
Closed PRs that will not be considered for merge:
This closes#1158
This closes#1097
Quota service while allowing for scalability will make sure that the cloud is
not exploited by attacks, careless use and program errors. To address this
problem, we propose to employ a quota-enforcement service that allows resource
usage within certain bounds as defined by policies and available quotas for
various entities. Quota service extends the functionality of usage server to
provide a measurement for the resources used by the accounts and domains using a
common unit referred to as cloud currency in this document. It can be configured
to ensure that your usage won’t exceed the budget allocated to accounts/domain
in cloud currency. It will let user know how much of the cloud resources he is
using. It will help the cloud admins, if they want, to ensure that a user does
not go beyond his allocated quota. Per usage cycle if a account is found to be
exceeding its quota then it is locked. Locking an account means that it will not
be able to initiat e a new resource allocation request, whether it is more
storage or an additional ip. Needless to say quota service as well as any action
on the account is configurable.
Changes from Github code review:
- Added marvin test for quota plugin API
- removed unused commented code
- debug messages in debug enabled check
- checks for nulls, fixed access to member variables and feature
- changes based on PR comments
- unit tests for UsageTypes
- unit tests for all Cmd classes
- unit tests for all service and manager impls
- try-catch-finally or try-with-resource in dao impls for failsafe db switching
- remove dead code
- add missing quota calculation case (regression fixed)
- replace tabs with spaces in pom.xmls
- quota: though default value for quota_calculated is 0, the usage server
makes it null while entering usage entries. Flipping the condition so
as to acocunt for that.
- quotatypes: fix NPE in quota type
- quota framework test fixes
- made statement period configurable
- changed default email templates to reflect the fact that exhausted quota may not result in a locked account
- added quotaUpdateCmd that refreshes quota balances and sends alerts and statements
- report quotaSummary command returns quota balance, quota usage and state for all account
- made UI framework changes to allow for text area input in edit views
- process usage entries that have greater than 0 usage
- orocess quota entries only if tariff is non zero
- if there are credit entries but no balance entry create a dummy balance entry
- remove any credit entries that are before the last balance entry
when displaying balance statement
- on a rerun the last balance is now getting added
FS: https://cwiki.apache.org/confluence/display/CLOUDSTACK/Quota+Service+-+FS
PR: https://github.com/apache/cloudstack/pull/768
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Changed the NetworkTopologyContext class just to make the private member accessible from the test
- Added a test class to cover the positive scenario of the VpcVirtualRouterElementTest.applyVpnUsers() method.
- Covering when there is either no VPC or no routers.
- Checks the result of a call against the previous result. Either both are true or the method returns false.
- Do not thrown exceptions because some calls are not handling/rethrowing them. It would cause runtime problems.
- When doing a list.addAll(Arrays.asList(String[]{}) will cause problems when trying to cast the list.toArray() into an aray of String
It would only work if instead of calling addAll() I would pass it straight into the constructor:
e.g. List<String> l = new ArrayList(Arrays.asList(new String[]{});
Stirng [] s = (String[]) l.toArray();
But I did not like that implementation because it would require 2 arrays of string and combine them at the end.
- Use the router to retrieve the instance ID
- Check if the VPC is redundant in order to reuse the private gateway address.
- Brings the private gateways interfaces up.
- It was causing problems because Nics were expected to be plugged before they actually exist. Only in rVPC cases.
- Applies ACL items to routers only after the Pvt GW is setup.
