The new CA framework introduced basic support for comma-separated
list of management servers for agent, which makes an external LB
unnecessary.
This extends that feature to implement LB sorting algorithms that
sorts the management server list before they are sent to the agents.
This adds a central intelligence in the management server and adds
additional enhancements to Agent class to be algorithm aware and
have a background mechanism to check/fallback to preferred management
server (assumed as the first in the list). This is support for any
indirect agent such as the KVM, CPVM and SSVM agent, and would
provide support for management server host migration during upgrade
(when instead of in-place, new hosts are used to setup new mgmt server).
This FR introduces two new global settings:
- `indirect.agent.lb.algorithm`: The algorithm for the indirect agent LB.
- `indirect.agent.lb.check.interval`: The preferred host check interval
for the agent's background task that checks and switches to agent's
preferred host.
The indirect.agent.lb.algorithm supports following algorithm options:
- static: use the list as provided.
- roundrobin: evenly spreads hosts across management servers based on
host's id.
- shuffle: (pseudo) randomly sorts the list (not recommended for production).
Any changes to the global settings - `indirect.agent.lb.algorithm` and
`host` does not require restarting of the mangement server(s) and the
agents. A message bus based system dynamically reacts to change in these
global settings and propagates them to all connected agents.
Comma-separated management server list is propagated to agents on
following cases:
- Addition of a host (including ssvm, cpvm systevms).
- Connection or reconnection by the agents to a management server.
- After admin changes the 'host' and/or the
'indirect.agent.lb.algorithm' global settings.
On the agent side, the 'host' setting is saved in its properties file as:
`host=<comma separated addresses>@<algorithm name>`.
First the agent connects to the management server and sends its current
management server list, which is compared by the management server and
in case of failure a new/update list is sent for the agent to persist.
From the agent's perspective, the first address in the propagated list
will be considered the preferred host. A new background task can be
activated by configuring the `indirect.agent.lb.check.interval` which is
a cluster level global setting from CloudStack and admins can also
override this by configuring the 'host.lb.check.interval' in the
`agent.properties` file.
Every time agent gets a ms-host list and the algorithm, the host specific
background check interval is also sent and it dynamically reconfigures
the background task without need to restart agents.
Note: The 'static' and 'roundrobin' algorithms, strictly checks for the
order as expected by them, however, the 'shuffle' algorithm just checks
for content and not the order of the comma separate ms host addresses.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-8855 Improve Error Message for Host Alert State
* [CLOUDSTACK-9846] create column to save the content of alert messages
Remove declaration of throws CloudRuntimeException
I also removed some unused variables and comments left behind
This closes#837
* Isolate a problematic test "smoke/test_certauthority_root"
* Refactored nuage tests
Added simulator support for ConfigDrive
Allow all nuage tests to run against simulator
Refactored nuage tests to remove code duplication
* Move test data from test_data.py to nuage_test_data.py
Nuage test data is now contained in nuage_test_data.py instead of
test_data.py
Removed all nuage test data from nuage_test_data.py
* CLOUD-1252 fixed cleanup of vpc tier network
* Import libVSD into the codebase
* CLOUDSTACK-1253: Volumes are not expunged in simulator
* Fixed some merge issues in test_nuage_vsp_mngd_subnets test
* Implement GetVolumeStatsCommand in Simulator
* Add vspk as marvin nuagevsp dependency, after removing libVSD dependency
* correct libVSD files for license purposes
pep8 pyflakes compliant
This deprecates and remove TLS 1.0 and 1.1 from preferred list of
protocols and keeps only TLSv1.2.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Update the displayText of XenServer ISO when it already exist in the DB
Besides updating the ISO display text, I also created unit test cases for 'createXenServerToolsIsoEntryInDatabase' and 'getActualIsoTemplate' methods.
* Formatting and cleanups for checkstyle of changed classes
L2 network refused to be designed on VXLAN physical network. Add fix for vxlan issue.
Add condition for L2 networks which do not allow specifying vlan.
* 4.11:
CLOUDSTACK-10306: Upgrade to VMware 6.5 vim jar dependency (#2467)
CLOUDSTACK-10298: fix for recreation of an earlier deleted Nuage managed network (#2460)
There is a race condition in the monitoring of the migration process on KVM. If the monitor wakes up in the tight window after the migration succeeds, but before the migration thread terminates, the monitor will get a LibvirtException “Domain not found: no domain with matching uuid” when checking on the migration status. This in turn causes CloudStack to sync the VM state to stop, in which it issues a defensive StopCommand to ensure it is correctly synced.
Fix: Prevent LibvirtException: "Domain not found" caused by the call to dm.getInfo()
CLOUDSTACK-10269: On deletion of role set name to null (#2444)
CLOUDSTACK-10146 checksum in java instead of script (#2405)
CLOUDSTACK-10222: Clean snaphosts from primary storage when taking (#2398)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
When user creates a snapshot (manual or recurring), snapshot remains on
the primary storage, even if the snapshot is transferred successfully to
secondary storage. This is causing issues because XenServer can only hold
a limited number of snapshots in its VDI chain, preventing the user from
creating new snapshots after some time, when too many old snapshots are
present on the primary storage.
Automate dynamic roles migration for missing props file
- In case commands.properties file is missing, enables dynamic roles.
- Adds a new -D or --default flag to migrate-dynamicroles.py script
to simply update the global setting and use the default role-rule
permissions.
- Add warning message, ask admins to move to dynamic roles during upgrade
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This fixes move refactoring error introduced in #2283
For instance, the class DatadiskTO is supposed to be in com.cloud.agent.api.to package. However, the folder structure it was placed in is com.cloud.agent.api.api.to.
Skip tests for cloud-plugin-hypervisor-ovm3:
For some unknown reason, there are quite a lot of broken test cases for cloud-plugin-hypervisor-ovm3. They might have appeared after some dependency upgrade and was overlooked by the person updating them. I checked them to see if they could be fixed, but these tests are not developed in a clear and clean manner. On top of that, we do not see (at least I) people using OVM3-hypervisor with ACS. Therefore, I decided to skip them.
Identention corrected to use spaces instead of tabs in XML files
Remove maven standard module (which only a few were using) and get ride of maven customization for the projects structure.
- moved all directories to src/main/java, src/main/resources, src/main/scripts, src/test/java, src/test/resources
- grep scan to search for src/com and src/org left over
- grep for <project>/scripts to fix pom.xml configuration
- remove custom <build> configuration in pom.xml
Signed-off-by: Marc-Aurèle Brothier <m@brothier.org>
The documentation of Libvirt specifies the requirement of using an XML namespace,
when having metadata in the Domain XML. The Nuage extenstion metadata was not
adhering to this specification, and the lastest Libvirt version ignores it in that case.
Allowed zone-wide primary storage based on a custom plug-in to be added via the GUI in a KVM-only environment (previously this only worked for XenServer and VMware)
Added support for root disks on managed storage with KVM
Added support for volume snapshots with managed storage on KVM
Enable creating a template directly from a volume (i.e. without having to go through a volume snapshot) on KVM with managed storage
Only allow the resizing of a volume for managed storage on KVM if the volume in question is either not attached to a VM or is attached to a VM in the Stopped state.
Included support for Reinstall VM on KVM with managed storage
Enabled offline migration on KVM from non-managed storage to managed storage and vice versa
Included support for online storage migration on KVM with managed storage (NFS and Ceph to managed storage)
Added support to download (extract) a managed-storage volume to a QCOW2 file
When uploading a file from outside of CloudStack to CloudStack, set the min and max IOPS, if applicable.
Included support for the KVM auto-convergence feature
The compression flag was actually added in version 1.0.3 (1000003) as opposed to version 1.3.0 (1003000) (changed this to reflect the correct version)
On KVM when using iSCSI-based managed storage, if the user shuts a VM down from the guest OS (as opposed to doing so from CloudStack), we need to pass to the KVM agent a list of applicable iSCSI volumes that need to be disconnected.
Added a new Global Setting: kvm.storage.live.migration.wait
For XenServer, added a check to enforce that only volumes from zone-wide managed storage can be storage motioned from a host in one cluster to a host in another cluster (cannot do so at the time being with volumes from cluster-scoped managed storage)
Don’t allow Storage XenMotion on a VM that has any managed-storage volume with one or more snapshots.
Enabled for managed storage with VMware: Template caching, create snapshot, delete snapshot, create volume from snapshot, and create template from snapshot
Added an SIOC API plug-in to support VMware SIOC
When starting a VM that uses managed storage in a cluster other than the one it last was running in, we need to remove the reference to the iSCSI volume from the original cluster.
Added the ability to revert a volume to a snapshot
Enabled cluster-scoped managed storage
Added support for VMware dynamic discovery
Extending Config Drive support
* Added support for VMware
* Build configdrive.iso on ssvm
* Added support for VPC and Isolated Networks
* Moved implementation to new Service Provider
* UI fix: add support for urlencoded userdata
* Add support for building systemvm behind a proxy
Co-Authored-By: Raf Smeets <raf.smeets@nuagenetworks.net>
Co-Authored-By: Frank Maximus <frank.maximus@nuagenetworks.net>
Co-Authored-By: Sigert Goeminne <sigert.goeminne@nuagenetworks.net>
CloudStack volumes and templates are one single virtual disk in case of XenServer/XCP and KVM hypervisors since the files used for templates and volumes are virtual disks (VHD, QCOW2). However, VMware volumes and templates are in OVA format, which are archives that can contain a complete VM including multiple VMDKs and other files such as ISOs. And currently, Cloudstack only supports Template creation based on OVA files containing a single disk. If a user creates a template from a OVA file containing more than 1 disk and launches an instance using this template, only the first disk is attached to the new instance and other disks are ignored.
Similarly with uploaded volumes, attaching an uploaded volume that contains multiple disks to a VM will result in only one VMDK to being attached to the VM.
FS: https://cwiki.apache.org/confluence/display/CLOUDSTACK/Support+OVA+files+containing+multiple+disks
This behavior needs to be improved in VMWare to support OVA files with multiple disks for both uploaded volumes and templates. i.e. If a user creates a template from a OVA file containing more than 1 disk and launches an instance using this template, the first disk should be attached to the new instance as the ROOT disk and volumes should be created based on other VMDK disks in the OVA file and should be attached to the instance.
Signed-off-by: Abhinandan Prateek <abhinandan.prateek@shapeblue.com>
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This fixes regression introduced in PR #2295:
- Pass assign=true to fetch new public IP
- Use wait_until instead of sleep+wait in tests
- Loop through list of public IP ranges to match the systemvm gateway
- Fix potential NPE seen when adding simulator host(s)
- Removes aria2 installation from setup_agent.sh using yum, it's already
dependency for cloudstack-agent package
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This feature allows using templates and ISOs avoiding secondary storage as intermediate cache on KVM. The virtual machine deployment process is enhanced to supported bypassed registered templates and ISOs, delegating the work of downloading them to primary storage to the KVM agent instead of the SSVM agent.
Template and ISO registration:
- When hypervisor is KVM, a checkbox is displayed with 'Direct Download' label.
- API methods registerTemplate and registerISO are both extended with this new parameter directdownload.
- On template or ISO registration, no download job is sent to SSVM agent, CloudStack would only persist an entry on template_store_ref indicating that template or ISO has been marked as 'Direct Download' (bypassing Secondary Storage). These entries are persisted as:
template_id = Template or ISO id on vm_template table
store_id NULL
download_state = BYPASSED
state = Ready
(Note: these entries allow users to deploy virtual machine from registered templates or ISOs)
- An URL validation command is sent to a random KVM host to check if template/ISO location can be reached. Metalink are also supported by this feature. In case of a metalink, it is fetched and URL check is performed on each of its URLs.
- Checksum should be provided as indicated on #2246: {ALGORITHM}CHKSUMHASH
- After template or ISO is registered, it would be displayed in the UI
Virtual machine deployment:
When a 'Direct Download' template is selected for deployment, CloudStack would delegate template downloading to destination storage pool via destination host by a new pluggable download manager.
Download manager would handle template downloading depending on URL protocol. In case of HTTP, request headers can be set by the user via vm_template_details. Those details should be persisted as:
Key: HTTP_HEADER
Value: HEADERNAME:HEADERVALUE
In case of HTTPS, a new API method is added uploadTemplateDirectDownloadCertificate to allow user importing a client certificate into all KVM hosts' keystore before deployment.
After template or ISO is downloaded to primary storage, usual entry would be persisted on template_spool_ref indicating the mapping between template/ISO and storage pool.
This happens when the root disk size is overridden. The primary storage limit check should be performed based on overridden size instead of template size. Enabled root disk resize tests to run on simulator as well.
This feature allow admins to dedicate a range of public IP addresses to the SSVM and CPVM, such that they can be subject to specific external firewall rules. The option to dedicate a public IP range to the System VMs (SSVM & CPVM) is added to the createVlanIpRange API method and the UI.
Solution:
Global setting 'system.vm.public.ip.reservation.mode.strictness' is added to determine if the use of the system VM reservation is strict (when true) or preferred (false), false by default.
When a range has been dedicated to System VMs, CloudStack should apply IPs from that range to
the public interfaces of the CPVM and the SSVM depending on global setting's value:
If the global setting is set to false: then CloudStack will use any unused and unreserved public IP
addresses for system VMs only when the pool of reserved IPs has been exhausted
If the global setting is set to true: then CloudStack will fail to deploy the system VM when the pool
of reserved IPs has been exhausted, citing the lack of available IPs.
UI Changes
Under Infrastructure -> Zone -> Physical Network -> Public -> IP Ranges, button 'Account' label is refactored to 'Set reservation'.
When that button is clicked, dialog displayed is also refactored, including a new checkbox 'System VMs' which indicates if range should be dedicated for CPVM and SSVM, and a note indicating its usage.
When clicking on button for any created range, UI dialog displayed indicates whether IP range is dedicated for system vms or not.
The first PR(#1176) intended to solve #CLOUDSTACK-9025 was only tackling the problem for CloudStack deployments that use single hypervisor types (restricted to XenServer). Additionally, the lack of information regarding that solution (poor documentation, test cases and description in PRs and Jira ticket) led the code to be removed in #1124 after a long discussion and analysis in #1056. That piece of code seemed logicless (and it was!). It would receive a hostId and then change that hostId for other hostId of the zone without doing any check; it was not even checking the hypervisor and storage in which the host was plugged into.
The problem reported in #CLOUDSTACK-9025 is caused by partial snapshots that are taken in XenServer. This means, we do not take a complete snapshot, but a partial one that contains only the modified data. This requires rebuilding the VHD hierarchy when creating a template out of the snapshot. The point is that the first hostId received is not a hostId, but a system VM ID(SSVM). That is why the code in #1176 fixed the problem for some deployment scenarios, but would cause problems for scenarios where we have multiple hypervisors in the same zone. We need to execute the creation of the VHD that represents the template in the hypervisor, so the VHD chain can be built using the parent links.
This commit changes the method com.cloud.hypervisor.XenServerGuru.getCommandHostDelegation(long, Command). From now on we replace the hostId that is intended to execute the “copy command” that will create the VHD of the template according to some conditions that were already in place. The idea is that starting with XenServer 6.2.0 hotFix ESP1004 we need to execute the command in the hypervisor host and not from the SSVM. Moreover, the method was improved making it readable and understandable; it was also created test cases assuring that from XenServer 6.2.0 hotFix ESP1004 and upward versions we change the hostId that will be used to execute the “copy command”.
Furthermore, we are not selecting a random host from a zone anymore. A new method was introduced in the HostDao called “findHostConnectedToSnapshotStoragePoolToExecuteCommand”, using this method we look for a host that is in the cluster that is using the storage pool where the volume from which the Snaphost is taken of. By doing this, we guarantee that the host that is connected to the primary storage where all of the snapshots parent VHDs are stored is used to create the template.
Consider using Disabled hosts when no Enabled hosts are found
This also closes#2317
