Issue
====
Exception occured while creating the CPVM in the VmWare Setup using standard vswitches.
StartCommand failed due to Exception: com.vmware.vim25.AlreadyExists
message: [] com.vmware.vim25.AlreadyExistsFaultMsg: The specified key, name, or identifier already exists
Fix
===
Ensure synchronization while attempting to create port group such that simultaneous attempts are not made with same port group name on same ESXi host.
Signed-off-by: Sateesh Chodapuneedi <sateesh.chodapuneedi@accelerite.com>
XenServer 7 SupportThis PR adds support for XenServer 7. I have manually done the following tests
- Create a new cluster with XenServer7
- Add Primary storage: Should create an SR on XS7
- Add another XS7 host to the Pool
- Add host2 to Cloudstack
- Create VM1 from template
- Create VM2 from template
- Ping/SSH VM1 to VM2 and vice-versa
- Stop/Delete/Expunge VM2
- Create Data disk
- Attach it to VM1
- Create VM snaphsot of VM1
- Restore VM snapshot of VM1
- Delete VM snapshot of VM1
- Create Volume snapshot of Datadisk
- Create volume snapshot of Root disk
- Create new template from snapshot of root disk
- Create volume from snapshot of datadisk
- Detach datadisk volume
- Delete datadisk volume
- Aquire a public IP
- Create a static nat to VM1
- Live migrate VM1 while traffic on VM
- Delete VM1
* pr/1711:
[CLOUDSTACK-9662] Add support for XenServer 7
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
-when processing static nat rule, add a mangle table rule, to mark the traffic
from the guest vm when it has associated static nat rule so that traffic gets
routed using the route tabe of the device which has public ip associated
-fix the case where nic_device_id is empty when ip is getting disassociated
resulting in empty deviceid in ips.json
-add utility methods in CsRule, and CsRoute to add 'ip rule' and 'ip route' rules respectivley
-ensure traffic from all public interfaces are connection marked with device number, and restored
for the reverse traffic. use the connection marked number to do device specific routing table lookup
fill the device specific routing table with default route
-component tests for testing multiple public interfaces of VR
Cloudstack 9586: When using local storage with Xenserver prepareTemplate does not work with multiple primary storeThe race condition will happen whenever there are multiple primary storages and the CS tries to mount the secondary store to xenserver host simultaneously.
Due to synchronised block one mount will be successful and other thread will get the already mounted SR. Without the fix the two thread will try to mount it parallely and one will fail on Xenserver.
* pr/1765:
Cloudstack 9586: When using local storage with Xenserver prepareTemplate does not work with multiple primary store The race condition will happen whenever there are multiple primary storages and the CS tries to mount the secondary store to xenserver host simultaneously. Due to synchronised block one mount will be successful and other thread will get the already mounted SR. Without the fix the two thread will try to mount it parallely and one will fail on Xenserver.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9564: Fix memory leaks in VmwareContextPoolIn a recent management server crash, it was found that the largest contributor
to memory leak was in VmwareContextPool where a registry is held (arraylist)
that grows indefinitely. The list itself is not used anywhere or consumed. There
exists a hashmap (pool) that returns a list of contexts for existing poolkey
(address/username) that is used instead.
This fixes the issue by removing the arraylist registry, and limiting the
length of the context list for a given poolkey.
@blueorangutan package
* pr/1729:
CLOUDSTACK-9564: Fix memory leaks in VmwareContextPool
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
The race condition will happen whenever there are multiple primary storages and the CS tries to mount the secondary store to xenserver host simultaneously.
Due to synchronised block one mount will be successful and other thread will get the already mounted SR. Without the fix the two thread will try to mount it parallely and one will fail on Xenserver.
In a recent management server crash, it was found that the largest contributor
to memory leak was in VmwareContextPool where a registry is held (arraylist)
that grows indefinitely. The list itself is not used anywhere or consumed. There
exists a hashmap (pool) that returns a list of contexts for existing poolkey
(address/username) that is used instead.
This fixes the issue by removing the arraylist registry, and limiting the
length of the context list for a given poolkey.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9566 instance-id metadata for baremetal VM returns IDThere is difference in instance-id metadata across baremetal and other hypervisors.
On Baremetal
[root@ip-172-17-0-144 ~]# curl http://8.37.203.221/latest/meta-data/instance-id
6021
on Xen
[root@ip-172-17-2-103 ~]# curl http://172.17.0.252/latest/meta-data/instance-id
cbeb517a-e833-4a0c-b1e8-9ed70200fbbf
In both cases it should be vm's uuid.
* pr/1738:
CLOUDSTACK-9566 instance-id metadata for baremetal VM returns ID
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9491: incorrect parsing of device list to find ethernet index of plugged NICIn VmwareResource, findRouterEthDeviceIndex() method find ethernet interface index given
the mac address. This method is used, once a nic is plugged to determine ethernet interface.
"/proc/sys/net/ipv4/conf" from the VR and looped through the devices to find the right
ethernet interface. Howver current logic read it once, and loops through the device list.
Its observerd device may not show up '/proc/sys/net/ipv4/conf' immediatly once NIC is plugged
in the VM from vCenter.
Fix ensured, while waiting for 15 sec in the loop, read the latest content from /proc/sys/net/ipv4/conf
, so that right device list is processed.
Manual tested VPC scenarios of adding new tiers which uses findRouterEthDeviceIndex, to find the guest/public network ethernet index.
* pr/1681:
CLOUDSTACK-9491: incorrect parsing of device list to find ethernet index of plugged NIC
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9503: Increased the VR script timeout. Most of the changes are about converting int/long time values to joda Duration.
* pr/1745:
CLOUDSTACK-9503: Increased the VR script timeout. Most of the changes are about converting int/long time values to joda Duration.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9502: DS template copies dont get deleted in VMware ESXi with multiple clusters and zone wide storage (include CLOUDSTACK-9386 into 4.9 release branch)Include #1560 into 4.9 release branch
* pr/1676:
CLOUDSTACK-9502: DS template copies don’t get deleted in VMware ESXi with multiple clusters and zone wide storage
Signed-off-by: John Burwell <meaux@cockamamy.net>
In VmwareResource, findRouterEthDeviceIndex() method find ethernet interface index given
the mac address. This method is used, once a nic is plugged to determine ethernet interface.
"/proc/sys/net/ipv4/conf" from the VR and looped through the devices to find the right
ethernet interface. However current logic read it once, and loops through the device list.
Its observerd device may not show up '/proc/sys/net/ipv4/conf' immediatly once NIC is plugged
in the VM from vCenter.Fix ensured, while waiting for 15 sec in the loop, read the latest
content from /proc/sys/net/ipv4/conf, so that right device list is processed.
Often, patch and security releases do not require schema migrations or
data migrations. However, if an empty upgrade class and associated
scripts are not defined, the upgrade process will break. With this
change, if a release does not have an upgrade, a noop DbUpgrade is added
to the upgrade path. This approach allows the upgrade to proceed and
for the database to properly reflect the installed version. This change
should make the release process simpler as RMs no longer need to
rememeber to create this boilerplate code when starting a new release.
Beginning with the 4.8.2.0 and 4.9.1.0 releases, the project will
formally adopt a four (4) position release number to properly accomodate
rekeases that contain only CVE fixes. The DatabaseUpgradeChecker and
Version classes made assumptions that they would always parse and
compare three (3) position version numbers. This change adds the
CloudStackVersion value object that supports both three (3) and four (4)
version numbers. It encapsulates version comparsion logic, as well as,
the rules to allow three (3) and four (4) to interoperate.
* Modifies DatabaseUpgradeChecker to handle derive an upgrade path for
a version that was not explicitly specified. It determines the
releases the first release before it with database migrations and uses
that list as the basis for the list for version being calculated. A
noop upgrade is then added to the list which causes no schema changes
or data migrations, but will update the database to the version.
* Adds unit tests for the upgrade path calculation logic in
DatabaseUpgradeChecker
* Removes dummy upgrade logic for the 4.8.2.0 introduced in previous
versions of this patch
* Introduces the CloudStackVersion value object which parses and
compares three (3) and four (4) position version numbers. This class
is intended to replace com.cloud.maint.Version.
* Adds the junit-dataprovider dependency -- allowing test data to be
concisely generated separately from the execution of a test case.
Used extensively in the CloudStackVersionTest.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
[blocker] CLOUDSTACK-9452: add python-argparse dependency on el6,7 rpmsThe patchviasocket script was rewritten in Python from PR #1533 and made
assumptions that Python 2.7 would be available. In case of CentOS, python 2.7
may not be available or installed. This change ensures that python-argparse
is installed which is used by this script.
/cc @wido @sverrirab @karuturi @jburwell
@blueorangutan package
* pr/1634:
CLOUDSTACK-9452: add python-argparse dependency on el6,7 rpms
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
The patchviasocket script was rewritten in Python from PR #1533 and made
assumptions that Python 2.7 would be available. In case of CentOS, python 2.7
may not be available or installed. This change ensures that python-argparse
is installed which is used by this script.
Expose cmd error in the logs when patch command fails.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
We noticed that when an exception occurs within the cleanup loop inside
the deletePhysicalDisk routine that the previously allocated contexts
are not cleaned up. This seemed to cause an eventual crash of the host
agent after multiple exceptions within the loop.
In addition to ensuring the contexts are always freed we also improved
the logging when exceptions do occur to include the actual return code
from the underlying library in deletePhysicalDisk and deleteSnapshot.
* 4.8:
CLOUDSTACK-9353: [XenServer] Fixed VM migration with storage
Added ASF license to unit test file
Added unit test to verify ordering
Fixed ordering of network ACL rules being sent to the VR. The comparator was inverted
* 4.7:
CLOUDSTACK-9353: [XenServer] Fixed VM migration with storage
Added ASF license to unit test file
Added unit test to verify ordering
Fixed ordering of network ACL rules being sent to the VR. The comparator was inverted
CLOUDSTACK-9368: Fix for Support configurable NFS version for Secondary Storage mounts## Description
JIRA TICKET: https://issues.apache.org/jira/browse/CLOUDSTACK-9368
This pull request address a problem introduced in #1361 in which NFS version couldn't be changed after hosts resources were configured on startup (for hosts using `VmwareResource`), and as host parameters didn't include `nfs.version` key, it was set `null`.
## Proposed solution
In this proposed solution `nfsVersion` would be passed in `NfsTO` through `CopyCommand` to `VmwareResource`, who will check if NFS version is still configured or not. If not, it will use the one sent in the command and will set it to its storage processor and storage handler. After those setups, it will proceed executing command.
* pr/1518:
CLOUDSTACK-9368: Fix for Support configurable NFS version for Secondary Storage mounts
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Convert patchviasocket to python (removes perl dependency for KVM agent)As requested here: https://github.com/apache/cloudstack/pull/1495
No scripts are using perl so that install requirement can be removed.
The new scripts are using standard python packages only.
Includes extensive unit test.
Note: perl-modules requirement is missing (fixed in mentioned PR) so do not merge that onto master.
* pr/1533:
Revert "Add perl-modules as install dependency for cloudstack-agent"
patchviasocket improve error handling
Convert patchviasocket to python (removes perl dependency for KVM agent)
Signed-off-by: Will Stevens <williamstevens@gmail.com>
As requested here: https://github.com/apache/cloudstack/pull/1495
No scripts are using perl so that install requirement can be removed.
The new scripts are using standard python packages only.
Includes extensive unit test.
Taking fast and efficient volume snapshots with XenServer (and your storage provider)A XenServer storage repository (SR) and virtual disk image (VDI) each have UUIDs that are immutable.
This poses a problem for SAN snapshots, if you intend on mounting the underlying snapshot SR alongside the source SR (duplicate UUIDs).
VMware has a solution for this called re-signaturing (so, in other words, the snapshot UUIDs can be changed).
This PR only deals with the CloudStack side of things, but it works in concert with a new XenServer storage manager created by CloudOps (this storage manager enables re-signaturing of XenServer SR and VDI UUIDs).
I have written Marvin integration tests to go along with this, but cannot yet check those into the CloudStack repo as they rely on SolidFire hardware.
If anyone would like to see these integration tests, please let me know.
JIRA ticket: https://issues.apache.org/jira/browse/CLOUDSTACK-9281
Here's a video I made that shows this feature in action:
https://www.youtube.com/watch?v=YQ3pBeL-WaA&list=PLqOXKM0Bt13DFnQnwUx8ZtJzoyDV0Uuye&index=13
* pr/1403:
Faster logic to see if a cluster supports resigning
Support for backend snapshots with XenServer
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CPU socket count reporting correctionCPU socket count reporting correction
From https://github.com/MissionCriticalCloud/cosmic-plugin-hypervisor-kvm/pull/16
* pr/1520:
Remove empty spaces causing the build to fail
CPU socket count reporting correction
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-8800 : Improved the listVirtualMachines API call to include memory utilization information for a VMThis PR introduces the changes proposed in PR #780 with some work to make the code null safe.
During this PR, I have also removed some unused code.
* pr/1444:
Removed unnecessary check when creating the “userVmResponse” object.
Fixed issues from CLOUDSTACK-8800 that were introduced in PR 780
CLOUDSTACK-8800 : Improved the listVirtualMachines API call to include memory utilization information for a VM for xenserver,kvm and for vmware.
Signed-off-by: Will Stevens <williamstevens@gmail.com>
