Fixes intermittent failures:
- Add a pause to avoid tests restarting before VRs recovering from HA have fully booted.
- Add some pauses to allow services to restart and hosts to reconnect before continuing tests.
- Adding a loop around this method because sometimes VRs are overloaded and just respond with exception, so it'll catch it and try 5 times with 30sec cooldown. If that fails as well it'll fail the test.
- wait until host is up using explicit check
Previously, the ethernet device index was used as rt_table index and
packet marking id/integer. With eth0 that is sometimes used as link-local
interface, the rt_table index `0` would fail as `0` is already defined
as a catchall (unspecified). The fwmarking on packets on eth0 with 0x0
would also fail. This fixes the routing issues, by adding 100 to the
ethernet device index so the value is a non-zero, for example then the
relationship between rt_table index and ethernet would be like:
100 -> Table_eth0 -> eth0 -> fwmark 100 or 0x64
101 -> Table_eth1 -> eth1 -> fwmark 101 or 0x65
102 -> Table_eth2 -> eth2 -> fwmark 102 or 0x66
This would maintain the legacy design of routing based on packet mark
and appropriate routing table rules per table/ids. This also fixes a
minor NPE issue around listing of snapshots.
This also backports fixes to smoketests from master.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This extends securing of KVM hosts to securing of libvirt on KVM
host as well for TLS enabled live VM migration. To simplify implementation
securing of host implies that both host and libvirtd processes are
secured with management server's CA plugin issued certificates.
Based on whether keystore and certificates files are available at
/etc/cloudstack/agent, the KVM agent determines whether to use TLS or
TCP based uris for live VM migration. It is also enforced that a secured
host will allow live VM migration to/from other secured host, and an
unsecured hosts will allow live VM migration to/from other unsecured
host only.
Post upgrade the KVM agent on startup will expose its security state
(secured detail is sent as true or false) to the managements server that
gets saved in host_details for the host. This host detail can be accesed
via the listHosts response, and in the UI unsecured KVM hosts will show
up with the host state of ‘unsecured’. Further, a button has been added
that allows admins to provision/renew certificates to KVM hosts and can
be used to secure any unsecured KVM host.
The `cloudstack-setup-agent` was modified to accept a new flag `-s`
which will reconfigure libvirtd with following settings:
listen_tcp=0
listen_tls=1
tcp_port="16509"
tls_port="16514"
auth_tcp="none"
auth_tls="none"
key_file = "/etc/pki/libvirt/private/serverkey.pem"
cert_file = "/etc/pki/libvirt/servercert.pem"
ca_file = "/etc/pki/CA/cacert.pem"
For a connected KVM host agent, when the certificate are
renewed/provisioned a background task is scheduled that waits until all
of the agent tasks finish after which libvirt process is restarted and
finally the agent is restarted via AgentShell.
There are no API or DB changes.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This fixes test failures around VMware with the new systemvmtemplate.
In addition:
- Does not skip rVR related test cases for VMware
- Removes rc.local
- Processes unprocessed cmd_line.json
- Fixed NPEs around VMware tests/code
- On VMware, use udevadm to reconfigure nic/mac address than rebooting
- Fix proper acpi shutdown script for faster systemvm shutdowns
- Give at least 256MB of swap for VRs to avoid OOM on VMware
- Fixes smoke tests for environment related failures
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
The 'force' option provided with the stopVirtualMachine API command is
often assumed to be a hard shutdown sent to the hypervisor, when in fact
it is for CloudStacks' internal use. CloudStack should be able to send
the 'hard' power-off request to the hosts.
When forced parameter on the stopVM API is true, power off (hard shutdown)
a VM. This uses initial changes from #1635 to pass the forced parameter
to hypervisor plugin via the StopCommand, and fixes force stop (poweroff)
handling for KVM, VMware and XenServer.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Removed duplicate test data related to vm properties.Modified tests dependent on it
Removed duplicte service offerings from test data and modified tests dependent on it
Bug-Id: CLOUDSTACK-8617
This closes#644
A number of BVT tests are not valid for LXC (e.g. migrating a VM), so this patch
ensures they skip if LXC is in use.
Signed-off-by: SrikanteswaraRao Talluri <talluri@apache.org>
ISO size can differ from the mounted packages within the ISO. Remove the
size check and only perform attach and detach in the guest.
Signed-off-by: Prasanna Santhanam <tsp@apache.org>
So fdisk -l doesn't list the mounted iso. Instead use showmount -e to
find the mounted device.
Signed-off-by: Prasanna Santhanam <tsp@apache.org>
(cherry picked from commit 93f79e1a158cb1f69915a4036f5c1840a38c5e53)
