Refactor: Cleanup duplicate code
Make use of Java 8 default implementation in interfaces,
to remove code duplication between XxxCmd and XxxCmdAsAdmin.
Refactor checkFormat by pre-calculating the supported
extensions. Also make use of this in ImageStoreUtil.
Makes it easier to add new file and compression formats.
Problem: In Vmware, appliances that have options that are required to be answered before deployments are configurable through vSphere vCenter user interface but it is not possible from the CloudStack user interface.
Root cause: CloudStack does not handle vApp configuration options during deployments if the appliance contains configurable options. These configurations are mandatory for VM deployment from the appliance on Vmware vSphere vCenter. As shown in the image below, Vmware detects there are mandatory configurations that the administrator must set before deploy the VM from the appliance (in red on the image below):
Solution:
On template registration, after it is downloaded to secondary storage, the OVF file is examined and OVF properties are extracted from the file when available.
OVF properties extracted from templates after being downloaded to secondary storage are stored on the new table 'template_ovf_properties'.
A new optional section is added to the VM deployment wizard in the UI:
If the selected template does not contain OVF properties, then the optional section is not displayed on the wizard.
If the selected template contains OVF properties, then the optional new section is displayed. Each OVF property is displayed and the user must complete every property before proceeding to the next section.
If any configuration property is empty, then a dialog is displayed indicating that there are empty properties which must be set before proceeding
image
The specific OVF properties set on deployment are stored on the 'user_vm_details' table with the prefix: 'ovfproperties-'.
The VM is configured with the vApp configuration section containing the values that the user provided on the wizard.
Fix regression bug that affects KVM local storage migration. Some of the desired execution flows for KVM local storage migration had been altered to allow only managed storage to execute. Fixed allowing managed and non managed storages to execute.
Fixes#3521
This reverts commit 7a27e35a612f13a0ce43459b22e01d9b69627220.
We're near 4.13 RC1, we've low confidence if the changes from #3152
would cause other regressions so reverting this. The author may send a
PR again towards 4.14.
Regressions found are all related to template and iso registration and
upload.
Retrieval of an image store using ImageStoreProviderManager has been refactored by introducing three different methods,
DataStore getRandomImageStore(List<DataStore> imageStores);
To get an image store for reading purpose. Threshold capacity check will not be used here.
DataStore getImageStoreWithFreeCapacity(List<DataStore> imageStores);
To get an image store for reading purpose. Threshold capacity check will be used here and the store with max free space will be returned. If no store with filled storage less than the threshold is found, the NULL value will be returned.
List<DataStore> listImageStoresWithFreeCapacity(List<DataStore> imageStores);
To get a list of image stores for writing purpose which fulfills threshold capacity check.
Correspondingly DataStoreManager methods have been refactored to return similar values for a given zone.
Fixes#3287 - NULL value will be returned when secondary storage is needed for writing but there is not store with free space.
Fixes#3041 - Rather than returning random secondary storage for writing, storage with max. free space will be returned.
Fixes#3478 - For migration on VMware, all writable secondary storage will be mounted while preparation.
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
Make use of Java 8 default implementation in interfaces,
to remove code duplication between XxxCmd and XxxCmdAsAdmin.
Refactor checkFormat by pre-calculating the supported
extensions. Also make use of this in ImageStoreUtil.
Makes it easier to add new file and compression formats.
There are certain scenarios where the 169.254.0.0/16 subnet is used for different
purposes then CloudStack on a hypervisor.
Once of such scenarios is a BGP+EVPN+VXLAN setup using BGP Unnumbered where the
169.254.0.1 address is used by Frr/Zebra BGP routing to send traffic to the
neighboring router.
The following settings can be changed in the agent.properties (default values added):
control.cidr=169.254.0.0/16
Make sure the global setting 'control.cidr' matches the values defined in the agent.propeties!
In the future the mgmt server can send this parameter to a KVM Agent on startup, but at the moment
this framework is not in place and thus these values can't be send to the Agent in a proper manner.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Currently when refreshing disk usage stats all kvm agents are asked to collect stats for all volumes. In setups with multiple kvm hosts where managed storage is used, not all volumes are attached to all kvm hosts, this results in a large number of warnings in the kvm agent logs. This change introduces a filter step in case managed storage is used so that the management server only requests kvm agents for stats about volumes that are connected to each kvm host.
Add CephSnapshotStrategy to handle RBD revert (rollback) snapshot. In order to support RBD revert (rbd_rollback), this PR adds a CephSnapshotStrategy class to handle Ceph/RBD snapshot actions.
During volume stats calculation, if a volume has more than one disk in
the chain-info it is not used to sum the physical and virtual size
in the loop, instead any previous entry was overwritten by the last disk.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Add revoke certificates API
* Add background task to sync certificates
* Fix marvin test and revoke certificate
* Fix certificate sent to hypervisor was missing headers
* Fix background task for uploading certificates to hosts
This change addresses #3089. There was an issue when disks were being added with bus type IDE when creating windows VMs from ISOs. It is not possible to select bus type when creating a VM with an ISO. The bus type is inferred based on the platform emulator string provided to the KVM agent. Currently when creating a VM with managed storage (ex: Solidfire) and OS type string Windows*, all disks are added as IDE. Qemu currently does not support multiple IDE controllers and this configuration results in VMs that cannot be started. This issue does not occur when using NFS as the storage provider due to logic in that KVM agent that makes all data volumes (non root) use a virtio controller for file based disk. Similar logic was added for raw physical disks so that managed storage has the same behavior as NFS. In addition specific versions were removed from the code that guesses the disk controller to be used based on the platform emulator string since most modern operating systems support virtio.
Fixes#3089
Problem: The VM metrics has aggregated volume bytes read/write and iops metrics but not on per volume basis.
Root Cause: The volume stats sub-system is not used to export the metrics, the support is not available for VMware.
Solution: Use the volume stats sub-system and DB table to export the metrics via the listVolumes and listVolumeMetrics API, and implement support for VMware and fix issue with network and disk metrics in the VM metrics view.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Problem: Users don't know what keys/values to enter for template and VM details.
Root Cause: The feature does not exist that can list possible details and options.
Solution: Based on the possible VM and template details handled by the
codebase, those details were refactored and a list API is introduced
that can return users those details along with possible values. When
users add details now, they will be presented with a list of key details
and their possible options if any.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Fixes tests path from old layout to standard maven in src/test/java/
- Removed duplicate SnapshotManagerImpl at old path `server/src/com...`
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Feature Specification: https://cwiki.apache.org/confluence/pages/viewpage.action?pageId=95653548
Live storage migration on KVM under these conditions:
From source and destination hosts within the same cluster
From NFS primary storage to NFS cluster-wide primary storage
Source NFS and destination NFS storage mounted on hosts
In order to enable this functionality, database should be updated in order to enable live storage capacibilty for KVM, if previous conditions are met. This is due to existing conflicts between qemu and libvirt versions. This has been tested on CentOS 6 hosts.
Additional notes:
To use this feature set the storage_motion_supported=1 in the hypervisor_capability table for KVM. This is done by default as the feature may not work in some environments, read below.
This feature of online storage+VM migration for KVM will only work with CentOS6 and possible Ubuntu as KVM hosts but not with CentOS7 due to:
https://bugs.centos.org/view.php?id=14026https://bugzilla.redhat.com/show_bug.cgi?id=1219541
On CentOS7 the error we see is: " error: unable to execute QEMU command 'migrate': this feature or command is not currently supported" (reference https://ask.openstack.org/en/question/94186/live-migration-unable-to-execute-qemu-command-migrate/). Reading through various lists looks like the migrate feature with qemu may be available with paid versions of RHEL-EV but not centos7 however this works with CentOS6.
Fix for CentOS 7:
Create repo file on /etc/yum.repos.d/:
[qemu-kvm-rhev]
name=oVirt rebuilds of qemu-kvm-rhev
baseurl=http://resources.ovirt.org/pub/ovirt-3.5/rpm/el7Server/
mirrorlist=http://resources.ovirt.org/pub/yum-repo/mirrorlist-ovirt-3.5-el7Server
enabled=1
skip_if_unavailable=1
gpgcheck=0
yum install qemu-kvm-common-ev-2.3.0-29.1.el7.x86_64 qemu-kvm-ev-2.3.0-29.1.el7.x86_64 qemu-img-ev-2.3.0-29.1.el7.x86_64
Reboot host
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Problem: Users can register ISOs from URL but cannot upload local ISOs.
Root cause: CloudStack provides browser-based upload support for volumes and templates, but ISOs are not supported.
Solution:
The existing browser-based upload from local functionality for templates and volumes (https://cwiki.apache.org/confluence/pages/viewpage.action?pageId=39620237) is extended to support uploading local ISOs.
Extend the UI: A new button is created under the ISOs view: 'Upload from Local'. A new dialog form is displayed in which the user must select the ISO to upload from its local file system.
Extend the API: New 'GetUploadParamsForIso' API command is created to handle the ISO upload.
To make sure that a qemu2-image won't be corrupted by the snapshot deletion procedure which is being performed after copying the snapshot to a secondary store, I'd propose to put a VM in to suspended state.
Additional reference: https://bugzilla.redhat.com/show_bug.cgi?id=920020#c5Fixes#3193
* Improvements on upload direct download certificates
* Move upload direct download certificate logic to KVM plugin
* Extend unit test certificate expiration days
* Add marvin tests and command to revoke certificates
* Review comments
* Do not include revoke certificates API
Since the CloudStack virtual router was redesigned on version 4.6 it has been observed that the DHCP leases file is not persistent across network operations. This causes conflicts on guest VMs static IPs, causing these static IPs to not be renewed by the DHCP server running on isolated and VPC networks' virtual routers (dnsmasq). On stopping or destroying a VM, its dhcp/dns records are not removed from the virtual router causing ghost effects.
Fixes#3272Fixes#3354
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
We do NOT always reserve VMware CPU/RAM resources - only when "vmware.reserve.cpu" or "vmware.reserve.mem" setting is set to TRUE - AND we do so, irrelevant if overprovisioning is active or not. Verified for both system VMs and user VMs.
* DPDK vHost User mode selection
* SQL text field and DPDK classes refactor
* Fix NullPointerException after refactor
* Fix unit test
* Refactor details type
This adds memory used column in the instance metrics view. Also fixes
a bug for VMware, due to which incorrect memory usage was returned.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
When I use SandyBridge as custom cpu in my testing, vm failed to start due to following error:
```
org.libvirt.LibvirtException: unsupported configuration: guest and host CPU are not compatible: Host CPU does not provide required features: avx, xsave, aes, tsc-deadline, x2apic, pclmuldq
```
With this patch, it works with the following setting in agent.properties:
```
guest.cpu.mode=custom
guest.cpu.model=SandyBridge
guest.cpu.features=-avx -xsave -aes -tsc-deadline -x2apic -pclmuldq
```
vm cpu is defined as below:
```
<cpu mode='custom' match='exact'>
<model fallback='allow'>SandyBridge</model>
<feature policy='disable' name='avx'/>
<feature policy='disable' name='xsave'/>
<feature policy='disable' name='aes'/>
<feature policy='disable' name='tsc-deadline'/>
<feature policy='disable' name='x2apic'/>
<feature policy='disable' name='pclmuldq'/>
</cpu>
```
On first startup, the management server creates and saves a random
ssh keypair using ssh-keygen in the database. The command does
not specify keys in PEM format which is not the default as generated
by latest ssh-keygen tool.
The systemvmtemplate always needs re-building whenever there is a change
in the cloud-early-config file. This also tries to fix that by introducing a
stage 2 bootstrap.sh where the changes specific to hypervisor detection
etc are refactored/moved. The initial cloud-early-config only patches
before the other scripts are called.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This fixes the issue that VM with VMsnapshots fails to start after
extract volume is done on a stopped VM, on VMware.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Fixes PR #3146 db cleanup to the correct 4.12->4.13 upgrade path
- Fixes failing unit test due to jdk specific changes after forward
merging
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This introduces a new patching script for patching systemvms on KVM
using qemu-guest-agent that runs inside the systemvm on startup. This
also removes the vport device which was previously used by the legacy
patching script and instead uses the modern and new uniform guest
agent vport for host-guest communication.
Also updates the sytemvmtemplate build config to use the latest Debian
9.9.0 iso.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* ubuntu16: fix unable to add host if cloudbrX is not configured
while add a ubuntu16.04 host with native eth0 (cloudbrX is not configured),
the operation failed and I got the following error in /var/log/cloudstack/agent/setup.log
```
DEBUG:root:execute:ifconfig eth0
DEBUG:root:[Errno 2] No such file or directory
File "/usr/lib/python2.7/dist-packages/cloudutils/serviceConfig.py", line 38, in configration
result = self.config()
File "/usr/lib/python2.7/dist-packages/cloudutils/serviceConfig.py", line 211, in config
super(networkConfigUbuntu, self).cfgNetwork()
File "/usr/lib/python2.7/dist-packages/cloudutils/serviceConfig.py", line 108, in cfgNetwork
device = self.netcfg.getDefaultNetwork()
File "/usr/lib/python2.7/dist-packages/cloudutils/networkConfig.py", line 53, in getDefaultNetwork
pdi = networkConfig.getDevInfo(dev)
File "/usr/lib/python2.7/dist-packages/cloudutils/networkConfig.py", line 157, in getDevInfo
elif networkConfig.isBridge(dev) or networkConfig.isOvsBridge(dev):
```
The issue is caused by commit 9c7cd8c2485412bc847b2c2473b962fa01435b24
2017-09-19 16:45 Sigert Goeminne ● CLOUDSTACK-10081: CloudUtils getDevInfo function will now return "bridge" instead o
* ubuntu16: Stop service libvirt-bin.socket while add a host
service libvirt-bin.socket will be started when add a ubuntu 16.04 host
DEBUG:root:execute:sudo /usr/sbin/service libvirt-bin start
However, libvirt-bin service will be broken by it after restarting
Stopping service libvirt-bin.socket will fix the issue.
An example is given as below.
```
root@node32:~# /etc/init.d/libvirt-bin restart
[ ok ] Restarting libvirt-bin (via systemctl): libvirt-bin.service.
root@node32:~# virsh list
error: failed to connect to the hypervisor
error: no valid connection
error: Failed to connect socket to '/var/run/libvirt/libvirt-sock': No such file or directory
root@node32:~# systemctl stop libvirt-bin.socket
root@node32:~# /etc/init.d/libvirt-bin restart
[ ok ] Restarting libvirt-bin (via systemctl): libvirt-bin.service.
root@node32:~# virsh list
Id Name State
----------------------------------------------------
```
* ubuntu16: Diable libvirt default network
By default, libvirt will create default network virbr0 on kvm hypervisors.
If vm uses the same ip range 192.168.122.0/24, there will be some issues.
In some cases, if we run tcpdump inside vm, we will see the ip of kvm hypervisor as source ip.
* Mock Scanner, instead of scan the computer running the test.
This allows non linux machines to run the tests without scanning for a
non existing /proc/meminfo.
* test fixes on 'other' platforms libvirt wrapper unit tests (#3)
* Fix XenServer Security Groups 'vmops' script
- fix tokens = line.split(':') to tokens = line.split(';')
- fix expected tokens size from 5 to 4
- enhance logs
- remove unused vmops script. The XCP patch points to the vmops script
on the parent folder [1]. Thus, all XenServer versions are considering
the vmops script located at [2].
- fix UI ipv4/ipv6 cidr validator to allow a list of cidirs.
Fixing issue: #3192 Security Group rules not applied at all for
XenServer 6.5 / Advanced Zone
https://github.com/apache/cloudstack/issues/3192
* Update security group rules after VM migration
Add security group rules on target host
Cause: vmops script expected secondary IPs as "0;" but received "0:"
Remove security group network rules on source host.
Cause: destroy_network_rules_for_vm function on vmops script was not
called when migrating VM
* Add unit tests and address reviewers
* Keep iotune section in the VM's XML after live migration
When live migrating a KVM VM among local storages, the VM loses the
<iotune> section on its XML, therefore, having no IO limitations.
This commit removes the piece of code that deletes the <iotune> section
in the XML.
* Add test for replaceStorage in LibvirtMigrateCommandWrapper
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* Fix Javadoc for method replaceIpForVNCInDescFile
* feature: add libvirt / qemu io bursting
Adds the ability to set bursting features from libvirt / qemu
This allows you to utilize the iops and bytes temporary "burst" mode
introduced with libvirt 2.4 and improved upon with libvirt 2.6.
https://blogs.igalia.com/berto/2016/05/24/io-bursts-with-qemu-2-6/
* updates per rafael et al
* api: add command to list management servers
* api: add number of mangement servers in listInfrastructure command
* ui: add block for mangement servers on infra page
* api name resolution method cleanup
* - Offline VM and Volume migration on Vmware hypervisor hosts
- Also add VM disk consolidation call on successful VM migrations
* Fix indentation of marvin test file and reformat against PEP8
* * Fix few comment typos
* Refactor debug messages to use String.format() when debug log level is enabled.
* Send list of commands returned by hypervisor Guru instead of explicitly selecting the first one
* Fix unhandled NPE during VM migration
* Revert back to distinct event descriptions for VM to host or storage pool migration
* Reformat test_primary_storage file against PEP-8 and Remove unused imports
* Revert back the deprecation messages in the custom StringUtils class to favour the use of the ApacheUtils
