Issue
=====
While listing datacenters associated with a zone, only zone Id validation is required.
There is no need to have additional checks like zone is a legacy zone or not.
Fix
===
Removed unnecessary checks over zone ID and just checking if zone with specified ID exists or not.
Signed-off-by: Sateesh Chodapuneedi <sateesh.chodapuneedi@accelerite.com>
(cherry picked from commit 0ef1c17541808641983e7c109db31e5cecc0ef44)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Summary: CLOUDSTACK-8921
snapshot_store_ref table should store actual size of back snapshot in secondary storage
Calling SR scan to make sure size is updated correctly
(cherry picked from commit 4e4b67cd96f6b360f5810099fb6b902b5491e001)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
with XenServer & Local SR (Db_exn.Uniqueness_constraint_violation)
removed the host uuid from SR label so that any host which has access to
the SR(all the hosts in the same pool) can reuse the same SR
(cherry picked from commit 1aa6a72bc7deda32c8cd07e468841e3fc15bf6f8)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
as that snapshot will never be going to use again and also it will fill up primary storage
(cherry picked from commit 336df84f1787de962a67d0a34551f9027303040e)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Updated hardcoded value with max data volumes limit from hypervisor capabilities.
(cherry picked from commit 93f5b6e8a391ce8b09be484d029c54d48a2b88aa)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Libvirt / Qemu (KVM) does not collect statistics about these either.
On some systems it might even yield a 'internal error' from libvirt
when attempting to gather block statistics from such devices.
For example Ubuntu 16.04 (Xenial) has a issue with this.
Skip them when looping through all devices.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
The 'force' option provided with the stopVirtualMachine API command is
often assumed to be a hard shutdown sent to the hypervisor, when in fact
it is for CloudStacks' internal use. CloudStack should be able to send
the 'hard' power-off request to the hosts.
When forced parameter on the stopVM API is true, power off (hard shutdown)
a VM. This uses initial changes from #1635 to pass the forced parameter
to hypervisor plugin via the StopCommand, and fixes force stop (poweroff)
handling for KVM, VMware and XenServer.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This fixes log4j xml to have @AGENTLOG@ replaced with values defined
in build/replace.properties.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Test scenarios:
- Enable cluster HA after VR is created. Now stop and start VR and check its restart priority, should be High.
- Enable cluster HA before VR is created. Now create some VM and verify that VR created must have High restart priority.
[4.9] CLOUDSTACK-9569: propagate global configuration router.aggregation.command.each.timeout to KVM agentThe router.aggregation.command.each.timeout in global configuration is only applied on new created KVM host.
For existing KVM host, changing the value will not be effective.
We need to propagate the configuration to existing host when cloudstack-agent is connected.
* pr/1856:
CLOUDSTACK-9569: propagate global configuration router.aggregation.command.each.timeout to KVM agent
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
CLOUDSTACK-9363: Fix HVM VM restart bug in XenServerHere is the longer description of the problem:
By default XenServer limits HVM guests to only 4 disks. Two of those are reserved for the ROOT disk (deviceId=0) and CD ROM (device ID=3) which means that we can only attach 2 data disks. This limit however is removed when Xentools is installed on the guest. The information that a guest has Xentools installed and can handle more than 4 disks is stored in the VM metadata on XenServer. When a VM is shut down, Cloudstack removes the VM and all the metadata associated with the VM from XenServer. Now, when you start the VM again, even if it has Xentools installed, it will default to only 4 attachable disks.
Now this problem manifests itself when you have a HVM VM and you stop and start it with more than 2 data disks attached. The VM fails to start and the only way to start the VM is to detach the extra disks and then reattach them after the VM start.
In this fix, I am removing the check which is done before creating a `VBD` which enforces this limit. This will not affect current workflow and will fix the HVM issue.
@koushik-das this is related to the "autodetect" feature that you introduced a while back (https://issues.apache.org/jira/browse/CLOUDSTACK-8826). I would love your review on this fix.
* pr/1829:
Fix HVM VM restart bug in XenServer
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
snapshots to exist together
Reverting VM to disk only snapshot in Xenserver corrupts VM
Stale NFS secondary storage on XS leads to volume creation failure from snapshot
XenServer 7 SupportThis PR adds support for XenServer 7. I have manually done the following tests
- Create a new cluster with XenServer7
- Add Primary storage: Should create an SR on XS7
- Add another XS7 host to the Pool
- Add host2 to Cloudstack
- Create VM1 from template
- Create VM2 from template
- Ping/SSH VM1 to VM2 and vice-versa
- Stop/Delete/Expunge VM2
- Create Data disk
- Attach it to VM1
- Create VM snaphsot of VM1
- Restore VM snapshot of VM1
- Delete VM snapshot of VM1
- Create Volume snapshot of Datadisk
- Create volume snapshot of Root disk
- Create new template from snapshot of root disk
- Create volume from snapshot of datadisk
- Detach datadisk volume
- Delete datadisk volume
- Aquire a public IP
- Create a static nat to VM1
- Live migrate VM1 while traffic on VM
- Delete VM1
* pr/1711:
[CLOUDSTACK-9662] Add support for XenServer 7
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Issue
====
Exception occured while creating the CPVM in the VmWare Setup using standard vswitches.
StartCommand failed due to Exception: com.vmware.vim25.AlreadyExists
message: [] com.vmware.vim25.AlreadyExistsFaultMsg: The specified key, name, or identifier already exists
Fix
===
Ensure synchronization while attempting to create port group such that simultaneous attempts are not made with same port group name on same ESXi host.
Signed-off-by: Sateesh Chodapuneedi <sateesh.chodapuneedi@accelerite.com>
-when processing static nat rule, add a mangle table rule, to mark the traffic
from the guest vm when it has associated static nat rule so that traffic gets
routed using the route tabe of the device which has public ip associated
-fix the case where nic_device_id is empty when ip is getting disassociated
resulting in empty deviceid in ips.json
-add utility methods in CsRule, and CsRoute to add 'ip rule' and 'ip route' rules respectivley
-ensure traffic from all public interfaces are connection marked with device number, and restored
for the reverse traffic. use the connection marked number to do device specific routing table lookup
fill the device specific routing table with default route
-component tests for testing multiple public interfaces of VR
Cloudstack 9586: When using local storage with Xenserver prepareTemplate does not work with multiple primary storeThe race condition will happen whenever there are multiple primary storages and the CS tries to mount the secondary store to xenserver host simultaneously.
Due to synchronised block one mount will be successful and other thread will get the already mounted SR. Without the fix the two thread will try to mount it parallely and one will fail on Xenserver.
* pr/1765:
Cloudstack 9586: When using local storage with Xenserver prepareTemplate does not work with multiple primary store The race condition will happen whenever there are multiple primary storages and the CS tries to mount the secondary store to xenserver host simultaneously. Due to synchronised block one mount will be successful and other thread will get the already mounted SR. Without the fix the two thread will try to mount it parallely and one will fail on Xenserver.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9564: Fix memory leaks in VmwareContextPoolIn a recent management server crash, it was found that the largest contributor
to memory leak was in VmwareContextPool where a registry is held (arraylist)
that grows indefinitely. The list itself is not used anywhere or consumed. There
exists a hashmap (pool) that returns a list of contexts for existing poolkey
(address/username) that is used instead.
This fixes the issue by removing the arraylist registry, and limiting the
length of the context list for a given poolkey.
@blueorangutan package
* pr/1729:
CLOUDSTACK-9564: Fix memory leaks in VmwareContextPool
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
The race condition will happen whenever there are multiple primary storages and the CS tries to mount the secondary store to xenserver host simultaneously.
Due to synchronised block one mount will be successful and other thread will get the already mounted SR. Without the fix the two thread will try to mount it parallely and one will fail on Xenserver.
In a recent management server crash, it was found that the largest contributor
to memory leak was in VmwareContextPool where a registry is held (arraylist)
that grows indefinitely. The list itself is not used anywhere or consumed. There
exists a hashmap (pool) that returns a list of contexts for existing poolkey
(address/username) that is used instead.
This fixes the issue by removing the arraylist registry, and limiting the
length of the context list for a given poolkey.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9566 instance-id metadata for baremetal VM returns IDThere is difference in instance-id metadata across baremetal and other hypervisors.
On Baremetal
[root@ip-172-17-0-144 ~]# curl http://8.37.203.221/latest/meta-data/instance-id
6021
on Xen
[root@ip-172-17-2-103 ~]# curl http://172.17.0.252/latest/meta-data/instance-id
cbeb517a-e833-4a0c-b1e8-9ed70200fbbf
In both cases it should be vm's uuid.
* pr/1738:
CLOUDSTACK-9566 instance-id metadata for baremetal VM returns ID
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9491: incorrect parsing of device list to find ethernet index of plugged NICIn VmwareResource, findRouterEthDeviceIndex() method find ethernet interface index given
the mac address. This method is used, once a nic is plugged to determine ethernet interface.
"/proc/sys/net/ipv4/conf" from the VR and looped through the devices to find the right
ethernet interface. Howver current logic read it once, and loops through the device list.
Its observerd device may not show up '/proc/sys/net/ipv4/conf' immediatly once NIC is plugged
in the VM from vCenter.
Fix ensured, while waiting for 15 sec in the loop, read the latest content from /proc/sys/net/ipv4/conf
, so that right device list is processed.
Manual tested VPC scenarios of adding new tiers which uses findRouterEthDeviceIndex, to find the guest/public network ethernet index.
* pr/1681:
CLOUDSTACK-9491: incorrect parsing of device list to find ethernet index of plugged NIC
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9503: Increased the VR script timeout. Most of the changes are about converting int/long time values to joda Duration.
* pr/1745:
CLOUDSTACK-9503: Increased the VR script timeout. Most of the changes are about converting int/long time values to joda Duration.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9502: DS template copies dont get deleted in VMware ESXi with multiple clusters and zone wide storage (include CLOUDSTACK-9386 into 4.9 release branch)Include #1560 into 4.9 release branch
* pr/1676:
CLOUDSTACK-9502: DS template copies don’t get deleted in VMware ESXi with multiple clusters and zone wide storage
Signed-off-by: John Burwell <meaux@cockamamy.net>
In VmwareResource, findRouterEthDeviceIndex() method find ethernet interface index given
the mac address. This method is used, once a nic is plugged to determine ethernet interface.
"/proc/sys/net/ipv4/conf" from the VR and looped through the devices to find the right
ethernet interface. However current logic read it once, and loops through the device list.
Its observerd device may not show up '/proc/sys/net/ipv4/conf' immediatly once NIC is plugged
in the VM from vCenter.Fix ensured, while waiting for 15 sec in the loop, read the latest
content from /proc/sys/net/ipv4/conf, so that right device list is processed.
Often, patch and security releases do not require schema migrations or
data migrations. However, if an empty upgrade class and associated
scripts are not defined, the upgrade process will break. With this
change, if a release does not have an upgrade, a noop DbUpgrade is added
to the upgrade path. This approach allows the upgrade to proceed and
for the database to properly reflect the installed version. This change
should make the release process simpler as RMs no longer need to
rememeber to create this boilerplate code when starting a new release.
Beginning with the 4.8.2.0 and 4.9.1.0 releases, the project will
formally adopt a four (4) position release number to properly accomodate
rekeases that contain only CVE fixes. The DatabaseUpgradeChecker and
Version classes made assumptions that they would always parse and
compare three (3) position version numbers. This change adds the
CloudStackVersion value object that supports both three (3) and four (4)
version numbers. It encapsulates version comparsion logic, as well as,
the rules to allow three (3) and four (4) to interoperate.
* Modifies DatabaseUpgradeChecker to handle derive an upgrade path for
a version that was not explicitly specified. It determines the
releases the first release before it with database migrations and uses
that list as the basis for the list for version being calculated. A
noop upgrade is then added to the list which causes no schema changes
or data migrations, but will update the database to the version.
* Adds unit tests for the upgrade path calculation logic in
DatabaseUpgradeChecker
* Removes dummy upgrade logic for the 4.8.2.0 introduced in previous
versions of this patch
* Introduces the CloudStackVersion value object which parses and
compares three (3) and four (4) position version numbers. This class
is intended to replace com.cloud.maint.Version.
* Adds the junit-dataprovider dependency -- allowing test data to be
concisely generated separately from the execution of a test case.
Used extensively in the CloudStackVersionTest.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
[blocker] CLOUDSTACK-9452: add python-argparse dependency on el6,7 rpmsThe patchviasocket script was rewritten in Python from PR #1533 and made
assumptions that Python 2.7 would be available. In case of CentOS, python 2.7
may not be available or installed. This change ensures that python-argparse
is installed which is used by this script.
/cc @wido @sverrirab @karuturi @jburwell
@blueorangutan package
* pr/1634:
CLOUDSTACK-9452: add python-argparse dependency on el6,7 rpms
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
