This commit allows deploying VMs with a specific IPv4 address.
DirectPodBasedNetworkGuru does not support requesting a custom
IP-Address while creating a new NIC/Instance, throwing the following
error:
Error 530: Does not support custom ip allocation at this time:
NicProfile[0-0-null-null-null
Unknown macro: { "cserrorcode"}
Some use-cases prefer the ability to request the IPv4 address which the
Instance will get.
This implementation adds unit test cases to cover and it was manually
tested in Basic Networking. I can perform more tests if requested.
With earlier work in Basic Networking and the security group provider IPv6 is
supported and we can allow IPv6 to be supplied in networks with SG enabled.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
This should not be in DEBUG as people would want to know that the host was skipped
because it didn't have enough slots available to run the VM.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
After upgrade existing environments to 4.11, ConfigDrive cannot be enabled for existing zones due to missing entry on 'physical_network_service_providers' table.
It does it by reusing the DateUtil helpers. DateUtil uses java.time.* as that one knows how to deal
with timezones correctly.
The format expected by signatureVersion=3&expires=.... is quite limited.
It should accept the following formats that are containing a timezone and/or milliseconds.
2018-10-01T08:12:14Z
2018-10-01T08:12:14+01:00
2018-10-01T08:12:14+0100
2018-10-01T08:12:14.000Z
2018-10-01T08:12:14.000+01:00
2018-10-01T08:12:14.000+0100
afaik only 2018-10-01T08:12:14+0100 is accepted by the current codebase.
This PR echoes other pull requests I made earlier this year. #2392 and #2867
Signed-off-by: Yoan Blanc <yoan.blanc@exoscale.ch>
* Remove some unused Classes
These classes were deleted because they have no references in our code base. They are not in Spring execution flow nor instantiated with "new":
- com.cloud.agent.api.CheckStateAnswer
- com.cloud.agent.api.StartupVMMAgentCommand
- com.cloud.agent.api.routing.UserDataCommand
- remove from description at
com.cloud.configuration.Config.ExecuteInSequenceNetworkElementCommands
enum
- com.cloud.agent.api.storage.UpgradeDiskCommand
- com.cloud.agent.api.storage.CreatePrivateTemplateCommand
- com.cloud.agent.api.storage.DestroyAnswer
- Note: "FIXME: Should have an DestroyAnswer" at
com.cloud.storage.resource.StoragePoolResource
- com.cloud.agent.api.storage.UpgradeDiskAnswer
- com.cloud.agent.api.storage.ManageVolumeAvailabilityAnswer
- com.cloud.agent.api.storage.ManageVolumeAvailabilityCommand
- com.cloud.exception.UsageServerException
- com.cloud.info.SecStorageVmLoadInfo
- com.cloud.serializer.SerializerHelper
* PR#1448 update description of 'execute.in.sequence.network.element.commands' param
Update description of 'execute.in.sequence.network.element.commands'parameter to reflect an unused command that has been removed. The removed class command is 'UserDataCommand'.
* Add cloud schema to update SQL
Prevents errors while migrating VM from ISO:
Test 1: Deploy VM from ISO -> Live migrate VM to another host -> ERROR
Test 2: Register ISO using Direct Download on KVM -> Deploy VM from ISO -> Live migrate VM to another host -> ERROR
- Prevent NullPointerException migrating VM from ISO
- Prevent mount secondary storage on ISO direct downloads on KVM
This force stops old VRs when performing rolling restart with
cleanup=true. This will ensure that VRs are powered off quickly than
wait longer for the normal ACPI shutdown. During testing, it was found
on VMware where VM stops are slow compared to XenServer and KVM.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Unify checksum API output for templates and ISOs: not list the checksum algorithm on:
KVM direct downloads
On in progress normal template downloads. The algorithm is shown on the listtemplates API, but after it is downloaded it is not shown anymore.
This adds a global setting for admins who may not want the rolling
restart of routers or are seeing any issues around it. In future, this
setting may be removed.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This fixes#2719 where private gateway IP might be incorrectly
programmed on a guest network nic. The VR would now check ipassoc
requests by mac addresses than provided nic/device id in case they are
wrong.
The root cause is that the device id information is lost when aggregated
commands are created upon starting of a new VPC VR, without the correct
device id in ip_associations json it mis-programs the VR.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
These boolean-return methods are named as "getXXX".
Other boolean-return methods are named as "isXXX".
Considering there methods will return boolean values, it should be more clear and consistent to rename them as "isXXX".
(rebase #2602 and #2816)
* CLOUDSTACK-9473: storage pool capacity check when volume is resized or migrated
Storage pool checker is not being called on resize and migrate volume.
This may lead to allocated percentage of storage above 100%.
Setup:
1 VMware cluster with 2 Hosts.
Executed Steps:
Applied the following global settings:
storage.overprovisioning.factor = 1
pool.storage.allocated.capacity.disablethreshold = 1
pool.storage.capacity.disablethreshold = 1
Restarted management server
Executed Resize and migrate pool and Observed that Storage pool checker is not performed on resizeVolume and migrateVolume.
Result:
Root cause analysis shows storage pool checker is not called when doing migration and resizing.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Removing UserVmDetailsDao duplicate field;
Found the following repeated field in the UserVmManagerImpl class
@Inject
private UserVmDetailsDao _vmDetailsDao;
@Inject
private UserVmDetailsDao _uservmDetailsDao;
Refactored to a single field;
@Inject
private UserVmDetailsDao userVmDetailsDao;
Similar to this PR: https://github.com/apache/cloudstack/pull/2750/files
* 4.11:
Changed the implementation of isVolumeOnManagedStorage(VolumeInfo) to check if the data store in question is for primary storage (and added a unit test from Daan Hoogland)
vmware: reboot VR after mac updates (#2794)
This re-introduces the rebooting of VR after setup of nics/macs in
case of VMware. It also adds a minor enhancement to show the console
esp. for root admins when VRs and systemvms are in starting state.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Previously, the ethernet device index was used as rt_table index and
packet marking id/integer. With eth0 that is sometimes used as link-local
interface, the rt_table index `0` would fail as `0` is already defined
as a catchall (unspecified). The fwmarking on packets on eth0 with 0x0
would also fail. This fixes the routing issues, by adding 100 to the
ethernet device index so the value is a non-zero, for example then the
relationship between rt_table index and ethernet would be like:
100 -> Table_eth0 -> eth0 -> fwmark 100 or 0x64
101 -> Table_eth1 -> eth1 -> fwmark 101 or 0x65
102 -> Table_eth2 -> eth2 -> fwmark 102 or 0x66
This would maintain the legacy design of routing based on packet mark
and appropriate routing table rules per table/ids. This also fixes a
minor NPE issue around listing of snapshots.
This also backports fixes to smoketests from master.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Cleaup and code-formatting POM files
* Remove obsolete mycila license-maven-plugin
* Remove obsolete console-proxy/plugin project
* Move console-proxy-rdbconsole under console-proxy parent
* Use correct parent path for rdpconsole
* Order alphabetally items in setnextversion.sh
* Unifiy License header in POMs
* Alphabetic order of modules definition
* Extract all defined versions into parent pom
* Remove obsolete files: version-info.in, configure-info.in
* Remove redundant defaultGoal
* Remove useless checkstyle plugin from checkstyle project
* Order alphabetally items in pom.xml
* Add aditional SPACEs to fix debian build
* Don't execute checkstyle on parent projects
* Use UTF-8 encoding in building checkstyle project
* Extract plugin versions into properties
* Execute PMD plugin on all the projects with -Penablefindbugs
* Upgrade maven plugins to latest version
* Make sure to always look for apache parent pom from repository
* Fix incorrect version grep in debian packaging
* Fix rebase conflicts
* Fix rebase conflicts
* Remove PMD for now to be fixed on another PR
