* Take setup from vhost.template rather than default(-ssl)
* should move into Python CS code as well
* Move CORS setup to separate conf
* Modify vhost template to Optionally include the cors file
* Add NameVirtualHost to vhost template for feature parity with ports.conf
* Take setup from vhost.template rather than default(-ssl)
[CLOUDSTACK-9296] Start ipsec for client VPNThis fix starts the IPSEC daemon when enabling client side vpn
* pr/1423:
[CLOUDSTACK-9296] Start ipsec for client VPN
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Lower the time we wait for interfaces to appearWaiting for interfaces is tricky. They might never appear.. for example when we have entries in `/etc/cloudstack/ips.json` that haven't been plugged yet. Waiting this long makes everything horribly slow (every vm, interface, static route, etc, etc, will hit this wait, for every device). We've seen CloudStack send an `ip_assoc.json` command for `eth1` public nic only and then the router goes crazy waiting for all other interfaces that were there before reboot and aren't there. If only the router would return to the mgt server a success of `eth1`, it would get the command for `eth2` etc etc. Obviously, a destroy works much faster because no state services, so no knowledge of previous devices so no waits :-)
After a stop/start the router has state in `/etc/cloudstack/ips.json` and every commands waits. Eventually hitting the hardcoded 120 sec timeout.
* pr/1471:
lower the time we wait for interfaces to appear
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-6975: Prevent dnsmasq from starting on backup redundant RvRRebase of PR #1509 against the 4.7 branch as requested by @swill
One LGTM from @ustcweizhou carried from previous PR. Previous PR will be closed.
Description from PR #1509:
CLOUDSTACK-6975 refers to service monitoring bringing up dnsmasq but this is no-longer accurate, as service monitoring is not active on the post-4.6 routers. These routers still suffer an essentially identical issue, however, because "dnsmasq needs to be restarted each time configure.py is called in order to avoid lease problems." As such, dnsmasq is still running on backup RvRs, causing the issues described in CLOUDSTACK-6975.
This PR is based on a patch submitted by @ustcweizhou. The code now checks the redundant state of the router before restarting dnsmasq.
RvR networks without this patch have dnsmasq running on both master and backup routers. RvR networks with this patch have dnsmasq running on only the master router.
* pr/1514:
CLOUDSTACK-6975: Prevent dnsmasq from starting on backup redundant RvR.
Signed-off-by: Will Stevens <williamstevens@gmail.com>
SystemVM cleanupsfrom the logrotate docs
> size - With this, the log file is rotated when the specified size is reached. Size may be specified in bytes (default), kilobytes (sizek), or megabytes (sizem).
> Note: If size and time interval options are specified at same time, only size option take effect. it causes log files to be rotated without regard for the last rotation time. If both log size and timestamp of a log file need to be considered by logrotate, the minsize option should be used. logrotate will rotate log file when they grow bigger than minsize, but not before the additionally specified time interval.
* pr/1414:
systemvm, logrotate: remove daily explicitly as it is ignored
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Seems to have a license issue so reverting for now.
This reverts commit 9a20ab8bcbbd39aa012a0ec5a65e66bcc737ee0e, reversing
changes made to 7a0b37a29a8be14011427dcf61bf3ea86e47dbf4.
Reimplement router.redundant.vrrp.interval settingGlobal setting `router.redundant.vrrp.interval` is not used any more and it is now set to a hardcoded 1.
This results in a failover from master->backup when the backup doesn't hear from the master in ~3.6sec. This is a bit too tight, as we've seen failovers during live migrations. We could reproduce it in about half of the cases. Setting this to setting to 2 (tested it by hardcoding it in the systemvms) gives twice as much time and we didn't see issues any more. Instead of updating the hardcoded setting from 1 to 2, I reimplemented the global setting by sending it to the router with the cmd_line, as the non-VPC router also does.
Background:
Why is the maximum failover time in the example 3.6 seconds? This comes from the advertisement interval and the skew time. The default advertisement interval is 1 second (configurable in keepalived.conf). The skew time helps to keep everyone from trying to transition at once. It is a number between 0 and 1, based on the formula (256 - priority) / 256
As defined in the RFC, the backup must receive an advertisement from the master every (3 * advert_int) + skew_time seconds. If it doesn't hear anything from the master, it takes over. With a backup router priority of 100 (as in the example), the failover will happen at most 3.6 seconds after the master goes down.
Source: http://www.hollenback.net/KeepalivedForNetworkReliability
* pr/1486:
Configure rVPC for router.redundant.vrrp.interval advert_int setting
Have rVPCs use the router.redundant.vrrp.interval setting
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Restore iptables at once using iptables-restore instead of calling iptables numerous timesThis makes handling the firewall rules about 50-60 times faster because it is generated in memory and then loaded once. It's work by @borisroman see PR #1400. Reopened it here because I think this is a great improvement.
* pr/1482:
Resolve conflict as forceencap is already in master
Split the cidr lists so we won't hit the iptables-resture limits
Check the existence of 'forceencap' parameter before use
Do not load previous firewall rules as we replace everyhing anyway
Wait for dnsmasq to finish restart
Remove duplicate spaces, and thus duplicate rules.
Restore iptables at once using iptables-restore instead of calling iptables numerous times
Add iptables copnversion script.
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Honour GS use_ext_dns and redundant VR VIPThis patch addresses two issues:
On redundant VR setups, the primary resolver being handed out to instances is the guest_ip (primary IP for the VR). This might lead to problems upon failover, at least while the DHCP lease doesn't update (because the primary resolver will be checked first until times out, however it'll be gone upon failover).
If Global Setting use_ext_dns is true, we don't want the VR to be the primary resolver at all.
* pr/1536:
This patch addresses two issues:
Signed-off-by: Will Stevens <williamstevens@gmail.com>
* 4.8:
CLOUDSTACK-9287 - Improve test by checking if pvt gw is removed and fix typos
Handle private gateways more reliably
CLOUDSTACK-9287 - Fix RVR public interface
CLOUDSTACK-9287 - Add integration test to cover the private gateway related changes
CLOUDSTACK-9287 - Refactor the interface state configuration
CLOUDSTACK-9287 - Check if the nic profile has already been removed from a certain router
CLOUDSTACK-9287 - Bring up the private gw interface on state change to master
CLOUDSTACK-9287 - Make sure private gw interface is not used for default gw
CLOUDSTACK-9287 - Add integration test to cover the private gw interface/mac address issues
CLOUDSTACK-9287 - Put private gateway interface down on backup router
CLOUDSTACK-9287 - Generate new mac address if router is redundant and nic profile exists
Add private gateway IP to router initialization config
apply static routes on change to master state
Handle private gateways more reliablyWhen initialising a VPC router we need to know which IP/device corresponds to a private gateway. This is to solve a problem when stop/starting a VPC router (which gets the private gateway config as a guest network and as a result breaks the functionality). You read it right, the private gateway is sent as type=guest after reboot and type=public initially.
Before this change, you could add a private gw to a running router but you couldn't restart it (it would mix up the tiers). Now the private gateway is detected properly and it works just fine.
Booting without private gateway:
```
root@r-167-VM:~# cat /etc/cloudstack/cmdline.json
{
"config": {
"baremetalnotificationapikey": "V2l1u3wKJVan01h8kq63-5Y5Ia3VLEW1v_Z6i-31QIRJXlt5vkqaqf6DVcdK0jP3u79SW6X9pqJSLSwQP2c2Rw",
"baremetalnotificationsecuritykey": "OXI16srCrxFBi-xOtEwcYqwLlMfSFTlTg66YHtXBBqR7HNN1us3HP5zWOKxfVmz4a3C1kUNLPrUH13gNmZlu4w",
"disable_rp_filter": "true",
"dns1": "8.8.8.8",
"domain": "cs2cloud",
"eth0ip": "169.254.0.42",
"eth0mask": "255.255.0.0",
"host": "192.168.22.61",
"name": "r-167-VM",
"port": "8080",
"privategateway": "None",
"redundant_router": "false",
"template": "domP",
"type": "vpcrouter",
"vpccidr": "10.0.0.0/24"
},
"id": "cmdline"
```
Booting with private gateway:
```
root@r-167-VM:~# cat /etc/cloudstack/cmdline.json
{
"config": {
"baremetalnotificationapikey": "V2l1u3wKJVan01h8kq63-5Y5Ia3VLEW1v_Z6i-31QIRJXlt5vkqaqf6DVcdK0jP3u79SW6X9pqJSLSwQP2c2Rw",
"baremetalnotificationsecuritykey": "OXI16srCrxFBi-xOtEwcYqwLlMfSFTlTg66YHtXBBqR7HNN1us3HP5zWOKxfVmz4a3C1kUNLPrUH13gNmZlu4w",
"disable_rp_filter": "true",
"dns1": "8.8.8.8",
"domain": "cs2cloud",
"eth0ip": "169.254.2.227",
"eth0mask": "255.255.0.0",
"host": "192.168.22.61",
"name": "r-167-VM",
"port": "8080",
"privategateway": "10.201.10.1",
"redundant_router": "false",
"template": "domP",
"type": "vpcrouter",
"vpccidr": "10.0.0.0/24"
},
"id": "cmdline"
```
And:
```
cat cmdline
vpccidr=10.0.0.0/24 domain=cs2cloud dns1=8.8.8.8 privategateway=10.201.10.1 template=domP name=r-167-VM eth0ip=169.254.2.227 eth0mask=255.255.0.0 type=vpcrouter disable_rp_filter=true baremetalnotificationsecuritykey=OXI16srCrxFBi-xOtEwcYqwLlMfSFTlTg66YHtXBBqR7HNN1us3HP5zWOKxfVmz4a3C1kUNLPrUH13gNmZlu4w baremetalnotificationapikey=V2l1u3wKJVan01h8kq63-5Y5Ia3VLEW1v_Z6i-31QIRJXlt5vkqaqf6DVcdK0jP3u79SW6X9pqJSLSwQP2c2Rw host=192.168.22.61 port=8080
```
Logs:
```
2016-02-24 20:08:45,723 DEBUG [c.c.n.r.VpcVirtualNetworkApplianceManagerImpl] (Work-Job-Executor-4:ctx-458d4c52 job-1402/job-1403 ctx-d5355fca) (logid:5772906c) Set privategateway field in cmd_line.json to 10.201.10.1
```
* pr/1474:
Handle private gateways more reliably
Add private gateway IP to router initialization config
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Apply static routes on change to master stateRefactored static routes for private gateways so they also get loaded when the router switches to master state. Otherwise they're lost and connections drop after fail over.
* pr/1472:
apply static routes on change to master state
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9287 - Fix unique mac address per rVPC routerThis is work by @wilderrodrigues, see PR #1413 It contains important fixes and I think it needs to be included so I send the PR again.
* pr/1483:
CLOUDSTACK-9287 - Improve test by checking if pvt gw is removed and fix typos
CLOUDSTACK-9287 - Fix RVR public interface
CLOUDSTACK-9287 - Add integration test to cover the private gateway related changes
CLOUDSTACK-9287 - Refactor the interface state configuration
CLOUDSTACK-9287 - Check if the nic profile has already been removed from a certain router
CLOUDSTACK-9287 - Bring up the private gw interface on state change to master
CLOUDSTACK-9287 - Make sure private gw interface is not used for default gw
CLOUDSTACK-9287 - Add integration test to cover the private gw interface/mac address issues
CLOUDSTACK-9287 - Put private gateway interface down on backup router
CLOUDSTACK-9287 - Generate new mac address if router is redundant and nic profile exists
Signed-off-by: Will Stevens <williamstevens@gmail.com>
On redundant VR setups, the primary resolver being handed out to instances is the guest_ip (primary IP for the VR). This might lead to problems upon failover, at least while the DHCP lease doesn't update (because the primary resolver will be checked first until times out, however it'll be gone upon failover).
If Global Setting use_ext_dns is true, we don't want the VR to be the primary resolver at all.
CLOUDSTACK-9336 surround the execution of baremetal-vr.py with condition
* pr/1463:
CLOUDSTACK-9336 surround the execution of baremetal-vr.py with condition
Signed-off-by: Will Stevens <williamstevens@gmail.com>
If the size directive is used, logrotate will ignore the daily, weekly, monthly,
and yearly directives.
remove cloud-cleanup
This script does not do anything because it fails due missing /var/log/cloud directory. Logrotate is used for this functionality.
Check the existence of 'forceencap' parameter before useCheck the existence of 'forceencap' parameter before use.
Error seen:
```
Traceback (most recent call last):
File "/opt/cloud/bin/update_config.py", line 140, in <module>
process_file()
File "/opt/cloud/bin/update_config.py", line 54, in process_file
finish_config()
File "/opt/cloud/bin/update_config.py", line 44, in finish_config
returncode = configure.main(sys.argv)
File "/opt/cloud/bin/configure.py", line 1003, in main
vpns.process()
File "/opt/cloud/bin/configure.py", line 488, in process
self.configure_ipsec(self.dbag[vpn])
File "/opt/cloud/bin/configure.py", line 544, in configure_ipsec
file.addeq(" forceencaps=%s" % CsHelper.bool_to_yn(obj['encap']))
KeyError: 'encap'
```
* pr/1402:
Check the existence of 'forceencap' parameter before use
Signed-off-by: Will Stevens <williamstevens@gmail.com>
They might never appear.. for example when we have entries in
/etc/cloudstack/ips.json that haven't been plugged yet. Waiting
this long makes everything horribly slow (every vm, interface,
static route, etc, etc, will hit this wait, for every device).
