- Refactor cloud-early-config and make appliance specific scripts
- Make patching work without requiring restart of appliance and remove
postinit script
- Migrate to systemd, speedup booting/loading
- Takes about 5-15s to boot on KVM, and 10-30seconds for VMware and XenServer
- Appliance boots and works on KVM, VMware, XenServer and HyperV
- Update Debian9 ISO url with sha512 checksum
- Speedup console proxy service launch
- Enable additional kernel modules
- Remove unknown ssh key
- Update vhd-util URL as previous URL was down
- Enable sshd by default
- Use hostnamectl to add hostname
- Disable services by default
- Use existing log4j xml, patching not necessary by cloud-early-config
- Several minor fixes and file refactorings, removed dead code/files
- Removes inserv
- Fix dnsmasq config syntax
- Fix haproxy config syntax
- Fix smoke tests and improve performance
- Fix apache pid file path in cloud.monitoring per the new template
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This commit adds support for passing IPv6 Addresses and/or Subnets as
Secondary IPs.
This is groundwork for CLOUDSTACK-9853 where IPv6 Subnets have to be
allowed in the Security Groups of Instances to we can add DHCPv6
Prefix Delegation.
Use ; instead of : for separating addresses, otherwise it would cause
problems with IPv6 Addresses.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* CLOUDSTACK-9972: Enhance listVolume API to include physical size and utilization.
Also fixed pool, cluster and pod info
* CLOUDSTACK-9972: Fix volume_view and duplicate API constant
* CLOUDSTACK-9972: Backport Do not allow vms to be deployed on hosts that are in disabled pod
* CLOUDSTACK-9972: Fix localization missing keys
* CLOUDSTACK-9972: Fix sql path
This commit implements basic Security Grouping for KVM in
Basic Networking.
It does not implement full Security Grouping yet, but it does:
- Prevent IP-Address source spoofing
- Allow DHCPv6 clients, but disallow DHCPv6 servers
- Disallow Instances to send out Router Advertisements
The Security Grouping allows ICMPv6 packets as described by RFC4890
as they are essential for IPv6 connectivity.
Following RFC4890 it allows:
- Router Solicitations
- Router Advertisements (incoming only)
- Neighbor Advertisements
- Neighbor Solicitations
- Packet Too Big
- Time Exceeded
- Destination Unreachable
- Parameter Problem
- Echo Request
ICMPv6 is a essential part of IPv6, without it connectivity will break or be very
unreliable.
For now it allows any UDP and TCP packet to be send in to the Instance which
effectively opens up the firewall completely.
Future commits will implement Security Grouping further which allows controlling UDP and TCP
ports for IPv6 like can be done with IPv4.
Regardless of the egress filtering (which can't be done yet) it will always allow outbound DNS
to port 53 over UDP or TCP.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
-when processing static nat rule, add a mangle table rule, to mark the traffic
from the guest vm when it has associated static nat rule so that traffic gets
routed using the route tabe of the device which has public ip associated
-fix the case where nic_device_id is empty when ip is getting disassociated
resulting in empty deviceid in ips.json
-add utility methods in CsRule, and CsRoute to add 'ip rule' and 'ip route' rules respectivley
-ensure traffic from all public interfaces are connection marked with device number, and restored
for the reverse traffic. use the connection marked number to do device specific routing table lookup
fill the device specific routing table with default route
-component tests for testing multiple public interfaces of VR
CLOUDSTACK-9503: Increased the VR script timeout. Most of the changes are about converting int/long time values to joda Duration.
* pr/1745:
CLOUDSTACK-9503: Increased the VR script timeout. Most of the changes are about converting int/long time values to joda Duration.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
[CLOUDSTACK-9423] Add ability to get virtual size of compressed VHDsWith object store like Swift as secondary storage, if a compressed VHD is uploaded as a template, the `VHDProcessor` incorrectly calculates the virutal size leading to the template being useless. This fix tries to guess the virtual size by partially decompressing it and falls back to a sensible default which is the size of the file.
Before the fix: template.properties on Swift
```
uniquename=routing-1
filename=routing-1.vhd
size=263417314
virtualsize=2894447637315205059
```
After the fix
```
uniquename=routing-1
filename=routing-1.vhd
size=263417314
virtualsize=3145728000
```
Look at the `virutalsize` in both cases
* pr/1598:
[CLOUDSTACK-9423] Add ability to get virtual size of compressed VHDs
Signed-off-by: Will Stevens <williamstevens@gmail.com>
* 4.8:
CLOUDSTACK-9353: [XenServer] Fixed VM migration with storage
Added ASF license to unit test file
Added unit test to verify ordering
Fixed ordering of network ACL rules being sent to the VR. The comparator was inverted
SecurityGroupRulesCmd code cleanupWrote a test and cleaned some duplicate code with the objective to evaluate the jenkins pull request process at builds.a.o
worthwhile to keep, IMHO.
* pr/1287:
SecurityGroupRulesCmd code cleanup review comments handled
deal with PMD warnings
code cleanup
security rules test
remove autogenerated pydev files
Signed-off-by: Koushik Das <koushik@apache.org>
again due to missing virtualsize property in template.properties
We have multiple file processors to process different types of image
formats. The processor interface has two methods getVirtualSize() and
process().
1. getVirtualSize() as the name says, returns the virtual size of
the file and is used at get the size while copying files from NFS to s3
2. process() returns FormatInfo struct which has fileType, size,
virutalSize, filename. on successfully downloading a template, each
file is passed to all the processors.process() and whichever returns a
FormatInfo, that will be used to create template.properties file. If
process() throws an InternalErrorException, template installation fails.
But, if process() returns null, template registration is successful with
template.properties missing some attributes like virtualSize, file
format etc. which results in this bug on restart of ssvm/cloud
service/management server.
failing the template download if virutalsize or some other properties
cannot be determined.
The following changes are done:
getVirtualSize() to always return size(if it can calculate, get virtual
size else return file size). This would mean the following changes
1. QCOW2Processor.getVirtualSize() to return file size if virtual
size calculation fails
2. VHDProcessor.getVirtualSize() to return file size if virtual size
calculation fails
process() to throw InternalErrorException if virtual size calculation
fails or any other exceptions occur. This would mean the following
changes
1. OVAProcessor to throw InternalErrorException if untar fails
2. QCOW2Processor to throw InternalErrorException if virtual size
calculation fails
3. VHDProcessor to throw InternalErrorException if virtual size
calculation fails
This reverts commit 6841ba61da5e407f7a16c4a575d1a4e8c8345970, reversing
changes made to 13b29bac5a1778e295df7e9fb21c502fcf017183.
Master is currently frozen, no merges without RM approval.
http://mail-archives.apache.org/mod_mbox/cloudstack-dev/201509.mbox/browser
It also broke the build:
[INFO] Apache CloudStack Framework - Jobs ................ SUCCESS [3.448s]
[INFO] Apache CloudStack Cloud Engine Internal Components API SUCCESS [2.528s]
[INFO] Apache CloudStack Server .......................... FAILURE [24.769s]
[INFO] Apache CloudStack Usage Server .................... SKIPPED
- With the changes added by the rVPC work, the bump priority became deprecated.
This commit includes a refactor to get it removed from the following resources:
* Java classes
* domain_router table - removing the is_priority_bumpup column
* Fixing unit tests
All changes were tested with:
XenServer 6.2 running under our VMWare zone
CloudStack Management Server running on MacBook Pro
MySql running on MackBook Pro
Storage Type: Local
Adding a couple of tests (ConfigHelperTest) to validate the following:
* Command is generated;
* JSON String is generated based on the Java Object
* JSON Object is generated based on the String content
Also fixed the SetPortForwardingRulesVpcConfigItem: implementation was missing.
The test build on an assumption on the order of items in a Set, while this changed in java 1.8
Signed-off-by: Laszlo Hornyak <laszlo.hornyak@gmail.com>
Add executeInVR() with timeout interface to VirtualRouterDeployer
AggregationControlCommand with Action.Finish may take longer than normal command
since it would execute all the commands in one execution, and it may result in
SSH timeout for SshHelper or other mechanism communicate with VR.
Introduce an new executeInVR() interface with added timeout period for waiting
FinishAggregationCommand to complete execution.
