Retrieval of an image store using ImageStoreProviderManager has been refactored by introducing three different methods,
DataStore getRandomImageStore(List<DataStore> imageStores);
To get an image store for reading purpose. Threshold capacity check will not be used here.
DataStore getImageStoreWithFreeCapacity(List<DataStore> imageStores);
To get an image store for reading purpose. Threshold capacity check will be used here and the store with max free space will be returned. If no store with filled storage less than the threshold is found, the NULL value will be returned.
List<DataStore> listImageStoresWithFreeCapacity(List<DataStore> imageStores);
To get a list of image stores for writing purpose which fulfills threshold capacity check.
Correspondingly DataStoreManager methods have been refactored to return similar values for a given zone.
Fixes#3287 - NULL value will be returned when secondary storage is needed for writing but there is not store with free space.
Fixes#3041 - Rather than returning random secondary storage for writing, storage with max. free space will be returned.
Fixes#3478 - For migration on VMware, all writable secondary storage will be mounted while preparation.
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
Problem: When a multi-disk OVA template is uploaded, only the root disk is recognized and VMs deployed using such template only get the root disk provisioned.
Root Cause: The template processor for multi-disk OVA was not used in the template upload processor.
Solution: Added support for local multi-disk OVA template upload. After a multi-disk OVA template is
uploaded, the mechanism that worked on multi-disk OVA templates registered using URL is now also used to discovers and creates data-disk templates in cloud.vm_template table and on the secondary storage.
To enable SSL on SSVMs :
• Upload the certificates like you usually do via the API or UI->Infrastructure tab
• Set the global settings secstorage.encrypt.copy, secstorage.ssl.cert.domain to appropriate values
along with the CPVM ones
• Restart management server (no need to destroy/restart SSVM (or the ssvm agent))
Test cases:
- Upload template and check it creates multi-disk folders on secondary
storage and entries in cloud.vm_template table
- Upload template and kill/shutdown management server. Then restart MS
to check if template sync works
- Copy template across zone of an uploaded template
Signed-off-by: Rohit Yadav rohit.yadav@shapeblue.com
These boolean-return methods are named as "getXXX".
Other boolean-return methods are named as "isXXX".
Considering there methods will return boolean values, it should be more clear and consistent to rename them as "isXXX".
(rebase #2602 and #2816)
* Cleaup and code-formatting POM files
* Remove obsolete mycila license-maven-plugin
* Remove obsolete console-proxy/plugin project
* Move console-proxy-rdbconsole under console-proxy parent
* Use correct parent path for rdpconsole
* Order alphabetally items in setnextversion.sh
* Unifiy License header in POMs
* Alphabetic order of modules definition
* Extract all defined versions into parent pom
* Remove obsolete files: version-info.in, configure-info.in
* Remove redundant defaultGoal
* Remove useless checkstyle plugin from checkstyle project
* Order alphabetally items in pom.xml
* Add aditional SPACEs to fix debian build
* Don't execute checkstyle on parent projects
* Use UTF-8 encoding in building checkstyle project
* Extract plugin versions into properties
* Execute PMD plugin on all the projects with -Penablefindbugs
* Upgrade maven plugins to latest version
* Make sure to always look for apache parent pom from repository
* Fix incorrect version grep in debian packaging
* Fix rebase conflicts
* Fix rebase conflicts
* Remove PMD for now to be fixed on another PR
Remove maven standard module (which only a few were using) and get ride of maven customization for the projects structure.
- moved all directories to src/main/java, src/main/resources, src/main/scripts, src/test/java, src/test/resources
- grep scan to search for src/com and src/org left over
- grep for <project>/scripts to fix pom.xml configuration
- remove custom <build> configuration in pom.xml
Signed-off-by: Marc-Aurèle Brothier <m@brothier.org>
CloudStack volumes and templates are one single virtual disk in case of XenServer/XCP and KVM hypervisors since the files used for templates and volumes are virtual disks (VHD, QCOW2). However, VMware volumes and templates are in OVA format, which are archives that can contain a complete VM including multiple VMDKs and other files such as ISOs. And currently, Cloudstack only supports Template creation based on OVA files containing a single disk. If a user creates a template from a OVA file containing more than 1 disk and launches an instance using this template, only the first disk is attached to the new instance and other disks are ignored.
Similarly with uploaded volumes, attaching an uploaded volume that contains multiple disks to a VM will result in only one VMDK to being attached to the VM.
FS: https://cwiki.apache.org/confluence/display/CLOUDSTACK/Support+OVA+files+containing+multiple+disks
This behavior needs to be improved in VMWare to support OVA files with multiple disks for both uploaded volumes and templates. i.e. If a user creates a template from a OVA file containing more than 1 disk and launches an instance using this template, the first disk should be attached to the new instance as the ROOT disk and volumes should be created based on other VMDK disks in the OVA file and should be attached to the instance.
Signed-off-by: Abhinandan Prateek <abhinandan.prateek@shapeblue.com>
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This feature allows using templates and ISOs avoiding secondary storage as intermediate cache on KVM. The virtual machine deployment process is enhanced to supported bypassed registered templates and ISOs, delegating the work of downloading them to primary storage to the KVM agent instead of the SSVM agent.
Template and ISO registration:
- When hypervisor is KVM, a checkbox is displayed with 'Direct Download' label.
- API methods registerTemplate and registerISO are both extended with this new parameter directdownload.
- On template or ISO registration, no download job is sent to SSVM agent, CloudStack would only persist an entry on template_store_ref indicating that template or ISO has been marked as 'Direct Download' (bypassing Secondary Storage). These entries are persisted as:
template_id = Template or ISO id on vm_template table
store_id NULL
download_state = BYPASSED
state = Ready
(Note: these entries allow users to deploy virtual machine from registered templates or ISOs)
- An URL validation command is sent to a random KVM host to check if template/ISO location can be reached. Metalink are also supported by this feature. In case of a metalink, it is fetched and URL check is performed on each of its URLs.
- Checksum should be provided as indicated on #2246: {ALGORITHM}CHKSUMHASH
- After template or ISO is registered, it would be displayed in the UI
Virtual machine deployment:
When a 'Direct Download' template is selected for deployment, CloudStack would delegate template downloading to destination storage pool via destination host by a new pluggable download manager.
Download manager would handle template downloading depending on URL protocol. In case of HTTP, request headers can be set by the user via vm_template_details. Those details should be persisted as:
Key: HTTP_HEADER
Value: HEADERNAME:HEADERVALUE
In case of HTTPS, a new API method is added uploadTemplateDirectDownloadCertificate to allow user importing a client certificate into all KVM hosts' keystore before deployment.
After template or ISO is downloaded to primary storage, usual entry would be persisted on template_spool_ref indicating the mapping between template/ISO and storage pool.
This implements a CloudStack Prometheus exporter as a plugin, that serves
metrics on a HTTP port.
New global settings:
1. prometheus.exporter.enable - (default: false), Enable the prometheus
exporter plugin, management server restart needed.
2. prometheus.exporter.port - (default: 9595), The prometheus exporter
server port.
3. prometheus.exporter.allowed.ips - (default: 127.0.0.1), List of comma
separated prometheus server ips (with no spaces) that should be allowed to
access the URLs.
The following list of metrics are provided per pop (zone) with the exporter:
• Per host:
o CPU cores: used, total
o CPU usage: used, total (in MHz)
o Memory usage: used, total (in MiBs)
o Total VMs running on the host
• CPU cores: allocated (per zone)
• CPU usage: allocated (per zone, in MHz)
• Memory usage: allocated (per zone, in MiBs)
• Hosts: online, offline, total
• VMs: in all states -- starting, running, stopping, stopped, destroyed,
expunging, migrating, error, unknown
• Volumes: ready, destroyed, total
• Primary Storage Pool: (Disk size) used, allocated, unallocated, total (in GiBs)
• Secondary Storage Pool: (Disk size) used, allocated, unallocated, total (in GiBs)
• Private IPs: allocated, total
• Public IPs: allocated, total
• Shared Network IPs: allocated, total
• VLANs: allocated, total
Additional metrics for the environment:
• Summed domain (level=1) limit for CPU cores
• Summed domain (level=1) limit for memory/ram
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
store ref table so builtin template is never downloaded completely
In handleSysTemplateDownload method creating template only if there exists no entry
handleTemplateSync will take care of other scenario
- Bump spring-framework version to 4.x and Jetty to version that runs with JDK8
- Bump servet dependency version
- Migrate spring xmls to version 4, fixes schema locations that are 3.0
dependent in various xmls.
- Fix failing tests due to spring upgrade
(Thanks @marcaurele Marc-Aurèle Brothier for fixing them)
* Fix test DeploymentPlanningManagerImplTest
* Fix GloboDNS test
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
The S3 implementation is far from finished, this commit focusses on the bases.
- Upgrade AWS SDK to latest version.
- Rewrite S3 Template downloader.
- Rewrite S3Utils utility class.
- Improve addImageStoreS3 API command.
- Split various classes for convenience.
- Various minor improvements and code optimalisations.
A side effect of the new AWS SDK is that it, by default, uses the V4 signature. Therefore I added an option to specify the Signer, so it stays compatible with previous versions.
inconsistent state (NotUploaded or UploadInProgress) and doesn't transition to any terminal
state (Uploaded, Uploaded). As a result these volumes/templates cannot be removed. Fix is to handle such
volume/template entries correctly.
The copy command reply can have null size returned, so check and set values
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit 53ca0b1861c743caf61ec04f776c87eac334f185)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
1. Adding the missing Template/Volume URLs expiration functionality
2. Improvement - While deleting the volume during expiration use rm -rf as vmware now contains directoy
3. Improvement - Use standard Answer so that the error gets logged in case deletion of expiration link didnt work fine.
4. Improvement - In case of domain change, expire the old urls
