Problem: When reinstalling a VM, the UI only shows featured templates and not all possible list of allowed templates.
Root Cause: The list of templates for reinstall used featured as filter in ‘listTemplates’ API which did not include all available options.
Solution: The issue is fixed by using the executable template filter of the ‘listTemplates’ API to list all
possible templates that a user is allowed to use to deploy a VM.
* Remove redundant checkbox that controls the visibility of volumes to delete when destroying VMs
* Change label from Volume IDs to Delete Volumes
* Revert back deleted Volume IDs label
## Description
Adds the MAC address to the NICs detail view of an instance.
## Types of changes
- [ ] Breaking change (fix or feature that would cause existing functionality to change)
- [ ] New feature (non-breaking change which adds functionality)
- [ ] Bug fix (non-breaking change which fixes an issue)
- [x] Enhancement (improves an existing feature and functionality)
- [ ] Cleanup (Code refactoring and cleanup, that may add test cases)
## Screenshots:
## How Has This Been Tested?
Tested locally to verify that the correct mac address gets displayed in the detail view.
* 4.11:
Changed the implementation of isVolumeOnManagedStorage(VolumeInfo) to check if the data store in question is for primary storage (and added a unit test from Daan Hoogland)
vmware: reboot VR after mac updates (#2794)
This re-introduces the rebooting of VR after setup of nics/macs in
case of VMware. It also adds a minor enhancement to show the console
esp. for root admins when VRs and systemvms are in starting state.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
On the 'NICs' tab, when a user clicks the 'Add network to VM' button to add a network to a VM, the 'Add network to VM' popup screen does not have an IP Address input field to allow a user to define a specific IP Address for a NIC. A user can specify the IP address for the first NIC when creating a VM instance, but cannot do that for subsequent NICs when adding a network to a VM.
To Reproduce:
Go to the 'Instances' screen by clicking the 'Instances' tab on the lefthand side.
On the 'Instances' screen click on a specific VM instance name.
This will open the 'Details' tab for the specific VM instance.
Click on the 'NICs' tab and then click on the 'Add network to VM' button to add a network to a VM.
The 'Add network to VM' popup screen will display.
Actual Behaviour:
The 'Add network to VM' popup screen does not have an IP Address input field to allow a user to define a specific IP Address for a NIC.
Expected behaviour:
The 'Add network to VM' popup screen must have an IP Address input field to allow a user to define a specific IP Address for a NIC.
Since the addNicToVirtualMachine API's ipaddress field is not required, the IP Address input field is also not a required field.
The IP Address input field must be validated for a valid IPv4 formatted value if the user enters anything into the field.
The valid user-specified IPv4 IP Address value must be allocated to the NIC if it is within the acceptable IP range for the chosen Network.
In the UI, on the Instances screen, the Quickview popup window and the Details window do not display the 'Reset SSH Key Pair' button for VMs in a running state. They only display when the VM is in a stopped state. This is inconsistent with the 'Reset Password' button behaviour, where it displays in both VM states: running and stopped. This fixes the issue so that the 'Reset SSH Key Pair' button also displays in both VM states.
Expected Behaviour:
In the UI, on the Instances screen, the Quickview popup window and the Details window must display the 'Reset SSH Key Pair' button in both VM states: running and stopped. When a user clicks on the 'Reset SSH Key Pair' button and a VM is in a running state, it will display a message "Vm xxx should be stopped to do SSH Key reset".
Actual Behaviour:
In the UI, on the Instances screen, the Quickview popup window and the Details window do not display the 'Reset SSH Key Pair' button for VMs in a running state. It only displays when the VM is in a stopped state.
While executing the find/replace, I found some blocks of duplicated code. Therefore, I extracted the duplicated part to an utils file, and then removed the duplicated blocks.
- Fixes timezone issue where dates show up as nvalid in UI
- Introduces new event timeline listing/filtering of events
- Several UI improvements to add columns in list views
- Bulk operations support in instance list view to shutdown and destroy
multiple-selected VMs (limitation: after operation, redundant entries
may show up in the list view, refreshing VM list view fixes that)
- Align table thead/tbody to avoid splitting of tables
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This feature allows CloudStack administrators to create layer 2 networks on CloudStack. As these networks are purely layer 2, they don't require IP addresses or Virtual Router, only VLAN is necessary (provided by administrator or assigned by CloudStack). Also, network services should be handled externally, e.g. DNS, DHCP, as they are not provided by L2 networks.
As a consequence, a new Guest Network type is created within CloudStack: L2
Description:
Network offerings and networks support new guest type: L2.
L2 Network offering creation allows administrator to select Specify VLAN or let CloudStack assign it dynamically.
L2 Network creation allows administrator to specify VLAN tag (if network offerings allows it) or simply create network.
VM deployments on L2 networks:
VMs should not IP addresses or any network service
No Virtual Router deployed on network
If Specify VLAN = true for network offering, network gets implemented using a dynamically assigned VLAN
UI changes
A new button is added on Networks tab, available for admins, to allow L2 networks creation
Supports following viewing and navigation/filtering:
- Networks -> view instances (instances that have nics on this network)
- Infra-> VRs -> view instances (attached to the VR's guest network id),
view owner account (if not system, or project), view instances
- Infra -> VRs -> list of VPC redundant VRs will have redundant state in
parenthesis in the list
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Reviewed-By: Rashmi Dixit
Problem: All the hosts suitable for VM Migration are not shown in the UI. This could
confuse the user as the target host might never be shown in the UI.
Root Cause: The API (findHostsForMigration) always returned page 1 results which would
be always <= default.page.size global parameter. Therefore, in case of large
no. of hosts where the result can map to multiple pages, this issue would arise.
Solution: 1. Replace drop-down with listView widget.
2. Allow lazy-loading of records on listView's scroll.
3. Show additional parameters (CPU/Memory used) to assist admin in decision making.
4. Provide 'Search by host name' to limit the results.
Added change where if there are no hosts found, an empty row with message will
appear.
[4.10] CLOUDSTACK-7985: assignVM in Advanced zone with Security GroupsThis commit contains the following changes:
(1) implementation of assignVM in Advanced zone with Security Groups
(2) keep the default nic on shared network when assignVM
(3) allow migrate vm from/to project;
(4) UI change for selecting account/project/network
* pr/844:
CLOUDSTACK-7985: assignVM in Advanced zone with Security Groups
CLOUDSTACK-7985: keep the default nic on shared network when assignVM
CLOUDSTACK-7985: (1) allow migrate vm from/to project; (2) UI change for selecting account/project/network
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
(1) add support to create/delete/revert vm snapshots on running vms with QCOW2 format
(2) add new API to create volume snapshot from vm snapshot
(3) delete metadata of vm snapshots before stopping/migrating and recover vm snapshots after starting/migrating
(4) enable deleting of VM snapshot on stopped vm or vm snapshot is not listed in qcow2 image.
(5) enable smoke tests for vmsnaphsots on KVM
[master] ui: Fix undefined check in instances.js, regression from 459d638(fix is already included in the https://github.com/apache/cloudstack/pull/1106 for 4.6 as well)
* pr/1119:
ui: Fix undefined check in instances.js, regression from 459d638
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* 4.6:
Fix event UUIDS missing on event bus
Add select template dropdown when reinstall VM
CLOUDSTACK-9068: Listing Port Forwarding Rules take too much time to load
Implements various metrics views based on a listView based widget that has following
properties:
- vertically and horizontally scrollable with pagination/infinite scrolling
- sortable columns (client side)
- groupable/collapsible columns
- alternate row coloring
- refresh button to refresh views
- threshold table cell coloring
- panel/breadcrumb navigation
- quick view action column
- translatable labels
- sorts after metrics is refreshed, if a column was previously sorted
- sorts after adding rows on infinite scrolling if a column was pre-sorted
- Metrics views: Zones, Clusters, Hosts, Instances, Storage pools, Volumes
- Resource filtering/navigation: Zones->Clusters->Hosts->Instances->Volumes,
Storage Pool->Volumes
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- l10n for the SSH Key Pairs behavior
- l10n for Autoscaling / LB sections
- l10n for Reset password
- l10n on some strings for the installation Wizard
- l10n on some strings in VPN/VPC section
- l10n on Service offerings sections
- improve some FR translations
Added responses to ListCapabilities to reflect CLOUDSTACK-8580 changes.
This to add these options to the gui. See issue CLOUDSTACK-8580.
3be14e978a
Removed comments as proposed by Daan Hoogland.
As recently discussed on the dev list:
This sorts the domain lists based on their path.
Especially handy when having a lot of domains,
like in a public cloud.
