[blocker] CLOUDSTACK-9452: add python-argparse dependency on el6,7 rpmsThe patchviasocket script was rewritten in Python from PR #1533 and made
assumptions that Python 2.7 would be available. In case of CentOS, python 2.7
may not be available or installed. This change ensures that python-argparse
is installed which is used by this script.
/cc @wido @sverrirab @karuturi @jburwell
@blueorangutan package
* pr/1634:
CLOUDSTACK-9452: add python-argparse dependency on el6,7 rpms
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
The patchviasocket script was rewritten in Python from PR #1533 and made
assumptions that Python 2.7 would be available. In case of CentOS, python 2.7
may not be available or installed. This change ensures that python-argparse
is installed which is used by this script.
Expose cmd error in the logs when patch command fails.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
We noticed that when an exception occurs within the cleanup loop inside
the deletePhysicalDisk routine that the previously allocated contexts
are not cleaned up. This seemed to cause an eventual crash of the host
agent after multiple exceptions within the loop.
In addition to ensuring the contexts are always freed we also improved
the logging when exceptions do occur to include the actual return code
from the underlying library in deletePhysicalDisk and deleteSnapshot.
* 4.8:
CLOUDSTACK-9353: [XenServer] Fixed VM migration with storage
Added ASF license to unit test file
Added unit test to verify ordering
Fixed ordering of network ACL rules being sent to the VR. The comparator was inverted
* 4.7:
CLOUDSTACK-9353: [XenServer] Fixed VM migration with storage
Added ASF license to unit test file
Added unit test to verify ordering
Fixed ordering of network ACL rules being sent to the VR. The comparator was inverted
CLOUDSTACK-9368: Fix for Support configurable NFS version for Secondary Storage mounts## Description
JIRA TICKET: https://issues.apache.org/jira/browse/CLOUDSTACK-9368
This pull request address a problem introduced in #1361 in which NFS version couldn't be changed after hosts resources were configured on startup (for hosts using `VmwareResource`), and as host parameters didn't include `nfs.version` key, it was set `null`.
## Proposed solution
In this proposed solution `nfsVersion` would be passed in `NfsTO` through `CopyCommand` to `VmwareResource`, who will check if NFS version is still configured or not. If not, it will use the one sent in the command and will set it to its storage processor and storage handler. After those setups, it will proceed executing command.
* pr/1518:
CLOUDSTACK-9368: Fix for Support configurable NFS version for Secondary Storage mounts
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Dynamically load drivers before creating our DB connectionsSolution to the mailing thread titled "MySQL : No suitable driver found for jdbc:mysql".
It doesn't harm that we explicitely load the MySQL driver, and for those which would use a commons-dbcp version < 1.4 this would fix it as well. Since JDBC 4.0, the JDBC driver can auto-register itself, but for some weird cases (like ours), it's not working. Therefore we need to explicitly load the JDBC driver.
* pr/1553:
Dynamic loading of DB driver + support for other DB providers
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Remodeling of Nuage VSP Plugin + CLOUDSTACK-9294Hi all,
We've remodeled the Nuage VSP plugin to use the same model as VMWare is using (non-OSS). Before, we had a runtime dependency to the Nuage Client, this has been changed to a compile-time dependency instead because of multiple reasons (build management, readability, maintainability, ...)
We've adapted the code so it now uses model objects defined in the Nuage client instead of passing a list of parameters to the Nuage client. This is a lot more readable, and a lot more maintainable.
I've had a chat with @DaanHoogland about this approach, and he told me that ACS is trying to move away from the whole non-OSS approach. We're looking into the Juniper approach, we would set up a custom maven repository which would host the required dependencies for the Nuage VSP plugin.
Any remarks or suggestions are always welcome :)
* pr/1494:
Nuage VSP : Extending Marvin test coverage
Nuage VSP : Fix for NPE while cleaning up account when there are still resources belonging to that account
CLOUDSTACK-9294 : Make sure to remove VR from VSD when removing the VPC
CLOUDSTACK-9242 : Remodel Nuage VSP plugin
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Convert patchviasocket to python (removes perl dependency for KVM agent)As requested here: https://github.com/apache/cloudstack/pull/1495
No scripts are using perl so that install requirement can be removed.
The new scripts are using standard python packages only.
Includes extensive unit test.
Note: perl-modules requirement is missing (fixed in mentioned PR) so do not merge that onto master.
* pr/1533:
Revert "Add perl-modules as install dependency for cloudstack-agent"
patchviasocket improve error handling
Convert patchviasocket to python (removes perl dependency for KVM agent)
Signed-off-by: Will Stevens <williamstevens@gmail.com>
As requested here: https://github.com/apache/cloudstack/pull/1495
No scripts are using perl so that install requirement can be removed.
The new scripts are using standard python packages only.
Includes extensive unit test.
Taking fast and efficient volume snapshots with XenServer (and your storage provider)A XenServer storage repository (SR) and virtual disk image (VDI) each have UUIDs that are immutable.
This poses a problem for SAN snapshots, if you intend on mounting the underlying snapshot SR alongside the source SR (duplicate UUIDs).
VMware has a solution for this called re-signaturing (so, in other words, the snapshot UUIDs can be changed).
This PR only deals with the CloudStack side of things, but it works in concert with a new XenServer storage manager created by CloudOps (this storage manager enables re-signaturing of XenServer SR and VDI UUIDs).
I have written Marvin integration tests to go along with this, but cannot yet check those into the CloudStack repo as they rely on SolidFire hardware.
If anyone would like to see these integration tests, please let me know.
JIRA ticket: https://issues.apache.org/jira/browse/CLOUDSTACK-9281
Here's a video I made that shows this feature in action:
https://www.youtube.com/watch?v=YQ3pBeL-WaA&list=PLqOXKM0Bt13DFnQnwUx8ZtJzoyDV0Uuye&index=13
* pr/1403:
Faster logic to see if a cluster supports resigning
Support for backend snapshots with XenServer
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CPU socket count reporting correctionCPU socket count reporting correction
From https://github.com/MissionCriticalCloud/cosmic-plugin-hypervisor-kvm/pull/16
* pr/1520:
Remove empty spaces causing the build to fail
CPU socket count reporting correction
Signed-off-by: Will Stevens <williamstevens@gmail.com>
- Fixes oobm integration test to skip if known ipmitool bug is hit
- Fixes ProcessTest unit test case to use sleep
- Removes redundant unit test that covers code in ProcessTest
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-8800 : Improved the listVirtualMachines API call to include memory utilization information for a VMThis PR introduces the changes proposed in PR #780 with some work to make the code null safe.
During this PR, I have also removed some unused code.
* pr/1444:
Removed unnecessary check when creating the “userVmResponse” object.
Fixed issues from CLOUDSTACK-8800 that were introduced in PR 780
CLOUDSTACK-8800 : Improved the listVirtualMachines API call to include memory utilization information for a VM for xenserver,kvm and for vmware.
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Remove classes with no referencesI used UCDetector (http://www.ucdetector.org/) as a plugin for Eclipse. With this tool, I discovered a lot of code without any reference (variables, methods and classes).
Following the work that was done at [https://github.com/apache/cloudstack/pull/1448]; this pull request had the goal of removing some of these classes. To check if I wasn't missing anything I searched for any file that could reference some of those classes. As I haven't found any way of these classes being used, they were removed. Note that some of them I found other references, but references such as commented lines or tests, nothing that could indicate their use (as XML files configuring beans or another class instantiating an object with "new").
Waiting for tests. Please tell me if I am missing something.
Removed Classes:
- org.apache.cloudstack.framework.jobs.JobCancellationException (**Note:** removed
variable JobCancellationException in com.cloud.utils.SerialVersionUID)
- org.apache.cloudstack.ldap.NoSuchLdapUserException (**Note:** removed test file
/cloud-plugin-user-authenticator-ldap/test/groovy/org/apache/cloudstack/ldap/NoSuchLdapUserExceptionSpec.groovy)
- com.cloud.agent.api.storage.CreateVolumeOVAAnswer
- com.cloud.exception.MissingParameterValueException
- org.apache.cloudstack.api.response.StatusResponse
- org.apache.cloudstack.api.response.VolumeDetailResponse
- org.apache.cloudstack.api.response.UpgradeVmResponse
- org.apache.cloudstack.api.response.AddIpToVmNicResponse
- org.apache.cloudstack.api.response.TemplateZoneResponse (**Note:** at
org.apache.cloudstack.api.response.TemplateResponse, there is this
comment "To avoid breaking backwards compatibility, we still treat a
template at different zones as different templates, so not embedding
template_zone information in this TemplateZoneResponse set. `private
Set<TemplateZoneResponse> zones;`" but right now it is not used)
- org.apache.cloudstack.api.response.NicDetailResponse
* pr/1453:
Removed classes with no reference
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9265 cleanup around httpclient versionssome cleanup done
- replaced HttpStatus from org.apache.commons.httpclient with that from org.apache.http
- removed unthrown HttpException
- left auto reformat in place
* pr/1385:
CLOUDSTACK-9265 cleanup around httpclient versions
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Notify listeners when a host has been added to a cluster, is about to be removed from a cluster, or has been removed from a cluster
This PR addresses the following JIRA ticket:
https://issues.apache.org/jira/browse/CLOUDSTACK-8813
The problem is that there needs to be notifications sent when a host is added to, about to be removed from, and removed from a cluster.
Such notifications can be used for many purposes. For example, it can allow storage plug-ins to update ACLs on their storage systems. Also, it can allow us to clean up IQNs from ESXi hosts that are no longer needed.
* pr/816:
CLOUDSTACK-8813: Notify listeners when a host has been added to a cluster, is about to be removed from a cluster, or has been removed from a cluster
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Support access to a host’s out-of-band management interface (e.g. IPMI, iLO,
DRAC, etc.) to manage host power operations (on/off etc.) and querying current
power state in CloudStack.
Given the wide range of out-of-band management interfaces such as iLO and iDRA,
the service implementation allows for development of separate drivers as plugins.
This feature comes with a ipmitool based driver that uses the
ipmitool (http://linux.die.net/man/1/ipmitool) to communicate with any
out-of-band management interface that support IPMI 2.0.
This feature allows following common use-cases:
- Restarting stalled/failed hosts
- Powering off under-utilised hosts
- Powering on hosts for provisioning or to increase capacity
- Allowing system administrators to see the current power state of the host
For testing this feature `ipmisim` can be used:
https://pypi.python.org/pypi/ipmisim
FS:
https://cwiki.apache.org/confluence/display/CLOUDSTACK/Out-of-band+Management+for+CloudStack
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This feature allows root administrators to define new roles and associate API
permissions to them.
A limited form of role-based access control for the CloudStack management server
API is provided through a properties file, commands.properties, embedded in the
WAR distribution. Therefore, customizing API permissions requires unpacking the
distribution and modifying this file consistently on all servers. The old system
also does not permit the specification of additional roles.
FS:
https://cwiki.apache.org/confluence/display/CLOUDSTACK/Dynamic+Role+Based+API+Access+Checker+for+CloudStack
DB-Backed Dynamic Role Based API Access Checker for CloudStack brings following
changes, features and use-cases:
- Moves the API access definitions from commands.properties to the mgmt server DB
- Allows defining custom roles (such as a read-only ROOT admin) beyond the
current set of four (4) roles
- All roles will resolve to one of the four known roles types (Admin, Resource
Admin, Domain Admin and User) which maintains this association by requiring
all new defined roles to specify a role type.
- Allows changes to roles and API permissions per role at runtime including additions or
removal of roles and/or modifications of permissions, without the need
of restarting management server(s)
Upgrade/installation notes:
- The feature will be enabled by default for new installations, existing
deployments will continue to use the older static role based api access checker
with an option to enable this feature
- During fresh installation or upgrade, the upgrade paths will add four default
roles based on the four default role types
- For ease of migration, at the time of upgrade commands.properties will be used
to add existing set of permissions to the default roles. cloud.account
will have a new role_id column which will be populated based on default roles
as well
Dynamic-roles migration tool: scripts/util/migrate-dynamicroles.py
- Allows admins to migrate to the dynamic role based checker at a future date
- Performs a harder one-way migrate and update
- Migrates rules from existing commands.properties file into db and deprecates it
- Enables an internal hidden switch to enable dynamic role based checker feature
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9350: KVM-HA- Fix CheckOnHost for Local storage- KVM-HA- Fix CheckOnHost for Local storage
- Also skip HA on VMs that are using local storage
* pr/1496:
CLOUDSTACK-9350: KVM-HA- Fix CheckOnHost for Local storage - Also skip HA on VMs that are using local storage
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CID-1338387: Deletion of method endPointSelector.selectHypervisorHostFollowing the discussions and analysis presented on PR #1056 create by @DaanHoogland
This PR is intended to push those changes that were discussed there regarding the of endPointSelector.selectHypervisorHost method.
* pr/1124:
Deletion of method endPointSelector.selectHypervisorHost
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Quota: consolidated lockable account check to a method. Added unit tests to check lockablity of various accounts.
Currently normal user and domain admin accounts are eligible for locking.
* pr/1350:
Quota: consolidated lockable account check to a method. Added unit tests to check lockablity of various accounts
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-8302: Removing snapshots on RBDSnapshot removing implemented if primary datastore is RBD
https://issues.apache.org/jira/browse/CLOUDSTACK-8302
* pr/1230:
CLOUDSTACK-8302 - Cleanup snapshot on KVM with RBD Snapshot removing implemented on RBD. 1. On management side: when created new shanpshot we checking if our primary storage is RBD, then do not remove record from cloud.snapshot_store_ref with link to Ceph image via 'install_path' field. 2. On management side: when removing snapshot, also send command to agent 'DeleteCommand'. 3. On agent side: method implemented 'public Answer deleteSnapshot(final DeleteCommand cmd)'
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Set default networkDomain to empty instead of usernameThe 10th field of `createUserAccount` is `networkDomain` (See `AccountService.java`) and it is set to a var named `admin`, which is the user name.
So, the first user that is created in a domain that links to LDAP, creates the account within the domain, and sets the `networkDomain` field to the username. All next users are created in the same account.
Then we have the situation that in domain SBP we have a user `rbergsma` that logs in first, gets an account created and then (unless you override) all VMs started in the SBP domain will have network domain `rbergsma`. That is highly confusing and not what is should be.
The `linkDomainToLdap` api call has no `networkDomain` field, so I propose to make this field empty (set it to null). It's a sting and null / empty is allowed.
One can also specify the networkDomain when creating a VPC and also there it is allowed to be null.
When te networkDomain is needed (and is not set in the domain and not in the VPC) it is constructed by using `guest.domain.suffix` so there always is a networkDomain to be used.
It makes more sense to manually set it on a domain level, or specify it on the VPC and in the final case end up with something that is clearly generated (like cs342cloud.local) rather than the username of someone else.
* pr/1485:
Set default networkDomain to empty instead of username
Signed-off-by: Will Stevens <williamstevens@gmail.com>
It was worked around some possible runtime exceptions introduced by the
changes that were added by the PR 780. Basically, the points in which a
null pointer exception could happen, we added safety checks to avoid
them. It was create a specific method do that, all together test cases
were created for this newly method that was added.
[4.7] vmware: improve support for disks- Improve disk chain usage while attaching, migrating disks
- Gets root disk controller based diskDeviceBusName from volume's chain info
* pr/1365:
vmware: improve support for disks
Signed-off-by: Will Stevens <williamstevens@gmail.com>
