CLOUDSTACK-9438: Fix for CLOUDSTACK-9252 - Make NFS version changeable in UIJIRA TICKET: https://issues.apache.org/jira/browse/CLOUDSTACK-9438
### Introduction
From #1361 it was possible to configure NFS version for secondary storage mount.
However, changing NFS version requires inserting an new detail on `image_store_details` table, with `name = 'nfs.version'` and `value = X` where X is desired NFS version, and then restarting management server for changes to take effect.
Our improvement aims to make NFS version changeable from UI, instead of previously described workflow.
### Proposed solution
Basically, NFS version is defined as an image store ConfigKey, this implied:
* Adding a new Config scope: **ImageStore**
* Make `ImageStoreDetailsDao` class to extend `ResourceDetailsDaoBase` and `ImageStoreDetailVO` implement `ResourceDetail`
* Insert `'display'` column on `image_store_details` table
* Extending `ListCfgsCmd` and `UpdateCfgCmd` to support **ImageStore** scope, which implied:
** Injecting `ImageStoreDetailsDao` and `ImageStoreDao` on `ConfigurationManagerImpl` class, on `cloud-server` module.
### Important
It is important to mention that `ImageStoreDaoImpl` and `ImageStoreDetailsDaoImpl` classes were moved from `cloud-engine-storage` to `cloud-engine-schema` module in order to Spring find those beans to inject on `ConfigurationManagerImpl` in `cloud-server` module.
We had this maven dependencies between modules:
* `cloud-server --> cloud-engine-schema`
* `cloud-engine-storage --> cloud-secondary-storage --> cloud-server`
As `ImageStoreDaoImpl` and `ImageStoreDetailsDao` were defined in `cloud-engine-storage`, and they needed in `cloud-server` module, to be injected on `ConfigurationManagerImpl`, if we added dependency from `cloud-server` to `cloud-engine-storage` we would introduce a dependency cycle. To avoid this cycle, we moved those classes to `cloud-engine-schema` module
* pr/1615:
CLOUDSTACK-9438: Fix for CLOUDSTACK-9252 - Make NFS version changeable in UI
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
CLOUDSTACK-9504: System VMs on Managed StorageThis PR makes it easier to spin up system VMs on managed storage.
Managed storage is when you have a dedicated volume on a SAN for a particular virtual disk (making it easier to deliver QoS).
For example, with this PR, you'd likely have a single virtual disk for a system VM. On XenServer, that virtual disk resides by itself in a storage repository (no other virtual disks share this storage repository).
It was possible in the past to spin up system VMs that used managed storage, but this PR facilitates the use case by making changes to the System Service Offering dialog (and by putting in some parameter checks in the management server).
JIRA ticket: https://issues.apache.org/jira/browse/CLOUDSTACK-9504
* pr/1642:
Added support for system VMs to make use of managed storage
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
fix to ensure only physical network with guest traffic is picked up for
creating a private network for vpc private gateway
Signed-off-by: Murali Reddy <muralimmreddy@gmail.com>
This closes#1724
fix to ensure only physical network with guest traffic is picked up for
creating a private network for vpc private gateway
Signed-off-by: Murali Reddy <muralimmreddy@gmail.com>
This closes#1724
fix to ensure only physical network with guest traffic is picked up for
creating a private network for vpc private gateway
Signed-off-by: Murali Reddy <muralimmreddy@gmail.com>
This closes#1724
- Switches to macchinina as template for VM in the tests
- Modifies the ostype of the macchinina template to 'Other Linux (64-bit)'
- Check template download status, fixes Nonetype iterable issue
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
As per previous discussions and ticket, a template deletion may result in failure
(exception thrown) for templates that are not properly downloaded. The tearDown
method, a template may be tried for deletion but on failure we may ignore it
as account deletion/tearDown would retry to cleanup resource owned by the account.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- test_01_test_vm_volume_snapshot not supported for Xen, tests keep failing
- Skip snapshot tests for centos6/kvm as snapshot is not supported by older
qemu-img versions
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
SSH to VR for vmware, goes via the mgmt server and uses ssh keys at
/var/cloudstack path. Add suitable checks to tests failing on vmware.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Handle case where physical network instance does not have vlan attribute
- Handle case where listIso response may not have status attribute
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
The quota integration test requires special setup and is moved to plugins
directory as in 4.9 and master branch.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9505: Fix test_deploy_vgpu_enabled tests cleanupJIRA TICKET: https://issues.apache.org/jira/browse/CLOUDSTACK-9505
## Description
Cleanup resources after running `test_deploy_vgpu_enabled.py`. Although test passes, resources are left and need to be cleaned up
* pr/1693:
CLOUDSTACK-9505: Fix test_deploy_vgpu_enabled tests cleanup
Signed-off-by: John Burwell <meaux@cockamamy.net>
Switched to the official SolidFire SDK for PythonSolidFire has recently released an official SDK for Python.
I have converted all of the SolidFire integration tests over to making use of this new SDK.
For testing, I re-ran each test and observed success.
https://pypi.python.org/pypi/solidfire-sdk-python/1.1.0.92
* pr/1689:
Switched to the official SolidFire SDK for Python
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
CLOUDSTACK-9480, CLOUDSTACK-9495 fix egress rule incorrect behaviorWhen 'default egress policy' is set to 'allow' in the network offering, any egress rule that is added will 'deny' the traffic overriding the default behaviour.
Conversely, when 'default egress policy' is set to 'deny' in the network offering, any egress rule that is added will 'allow' the traffic overriding the default behaviour.
While this works for 'tcp', 'udp' as expected, for 'icmp' protocol its always set to ALLOW. This patch keeps all protocols behaviour consistent.
Results of running test/integration/component/test_egress_fw_rules.py. With out the patch test_02_egress_fr2 test was failing. This patch fixes the test_02_egress_fr2 scenario.
-----------------------------------------------------------------------------------------------------
Test By-default the communication from guest n/w to public n/w is NOT allowed. ... === TestName: test_01_1_egress_fr1 | Status : SUCCESS ===
ok
Test By-default the communication from guest n/w to public n/w is allowed. ... === TestName: test_01_egress_fr1 | Status : SUCCESS ===
ok
Test Allow Communication using Egress rule with CIDR + Port Range + Protocol. ... === TestName: test_02_1_egress_fr2 | Status : SUCCESS ===
ok
Test Allow Communication using Egress rule with CIDR + Port Range + Protocol. ... === TestName: test_02_egress_fr2 | Status : SUCCESS ===
ok
Test Communication blocked with network that is other than specified ... === TestName: test_03_1_egress_fr3 | Status : SUCCESS ===
ok
Test Communication blocked with network that is other than specified ... === TestName: test_03_egress_fr3 | Status : SUCCESS ===
ok
Test Create Egress rule and check the Firewall_Rules DB table ... === TestName: test_04_1_egress_fr4 | Status : SUCCESS ===
ok
Test Create Egress rule and check the Firewall_Rules DB table ... === TestName: test_04_egress_fr4 | Status : SUCCESS ===
ok
Test Create Egress rule and check the IP tables ... SKIP: Skip
Test Create Egress rule and check the IP tables ... SKIP: Skip
Test Create Egress rule without CIDR ... === TestName: test_06_1_egress_fr6 | Status : SUCCESS ===
ok
Test Create Egress rule without CIDR ... === TestName: test_06_egress_fr6 | Status : SUCCESS ===
ok
Test Create Egress rule without End Port ... === TestName: test_07_1_egress_fr7 | Status : EXCEPTION ===
ERROR
Test Create Egress rule without End Port ... === TestName: test_07_egress_fr7 | Status : SUCCESS ===
ok
Test Port Forwarding and Egress Conflict ... SKIP: Skip
Test Port Forwarding and Egress Conflict ... SKIP: Skip
Test Delete Egress rule ... === TestName: test_09_1_egress_fr9 | Status : SUCCESS ===
ok
Test Delete Egress rule ... === TestName: test_09_egress_fr9 | Status : SUCCESS ===
ok
Test Invalid CIDR and Invalid Port ranges ... === TestName: test_10_1_egress_fr10 | Status : SUCCESS ===
ok
Test Invalid CIDR and Invalid Port ranges ... === TestName: test_10_egress_fr10 | Status : SUCCESS ===
ok
Test Regression on Firewall + PF + LB + SNAT ... === TestName: test_11_1_egress_fr11 | Status : SUCCESS ===
ok
Test Regression on Firewall + PF + LB + SNAT ... === TestName: test_11_egress_fr11 | Status : SUCCESS ===
ok
Test Reboot Router ... === TestName: test_12_1_egress_fr12 | Status : SUCCESS ===
ok
Test Reboot Router ... === TestName: test_12_egress_fr12 | Status : EXCEPTION ===
ERROR
Test Redundant Router : Master failover ... === TestName: test_13_1_egress_fr13 | Status : SUCCESS ===
ok
Test Redundant Router : Master failover ... === TestName: test_13_egress_fr13 | Status : SUCCESS ===
ok
-----------------------------------------------------------------------------------------------------
* pr/1666:
fix egress rule incorrect behavior
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
CLOUDSTACK-9480: Egress Firewall: Incorrect use of Allow/Deny for ICMP
fix ensures, ICMP, TCP, UDP are handled similalry w.r.t egress rule action
CLOUDSTACK-9495: Egress rules functionalty broken when protocol=all specified
when protocol=all specified, CIDR was ignored. Fix ensures if CIDR is specified
its always used in configuring iptable rules
2 new test cased to test /32 CIDR
Adding support for cross-cluster storage migration for managed storage when using XenServerThis PR adds support for cross-cluster storage migration of VMs that make use of managed storage with XenServer.
Managed storage is when you have a 1:1 mapping between a virtual disk and a volume on a SAN (in the case of XenServer, an SR is placed on this SAN volume and a single virtual disk placed in the SR).
Managed storage allows features such as storage QoS and SAN-side snapshots to work (sort of analogous to VMware VVols).
This PR focuses on enabling VMs that are using managed storage to be migrated across XenServer clusters.
I have successfully run the following tests on this branch:
TestVolumes.py
TestSnapshots.py
TestVMSnapshots.py
TestAddRemoveHosts.py
TestVMMigrationWithStorage.py (which is a new test that is being added with this PR)
* pr/1671:
Adding support for cross-cluster storage migration for managed storage when using XenServer
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
CLOUDSTACK-9428: Fix for CLOUDSTACK-9211 - Improve performance of 3D GPU support in cloud-plugin-hypervisor-vmwareJIRA TICKET: https://issues.apache.org/jira/browse/CLOUDSTACK-9428
### Introduction
On #1310 passing vRAM size to support 3D GPU problem was addressed on VMware. It was found out that it could be improved to increase performance by reducing extra API calls, as we'll describe later
### Improvement
On WMware, `VmwareResource` manages execution of `StartCommand.` Before sending power on command to ESXi hypervisor, vm is configured by calling `reconfigVMTask` web method on vSphere's client `VimPortType` web service.
It was found out that we were using this method 2 times when passing vRAM size, as it implied creating a new vm config spec only editing video card specs and making an extra call to `reconfigVMTask.`
We propose reducing the extra web service call by adjusting vm's config spec. This way video card gets properly configured (when passing vRAM size) in the same configure call, increasing performance.
### Use case (passing vRAM size)
* Deploy a new VM, let its id be X
* Stop VM
* Execute SQL, where X is vm's id and Z is vRAM size (in kB):
````
INSERT INTO cloud.user_vm_details (vm_id, name, value) VALUES (X, 'mks.enable3d', 'true');
INSERT INTO cloud.user_vm_details (vm_id, name, value) VALUES (X, 'mks.use3dRenderer', 'automatic');
INSERT INTO cloud.user_vm_details (vm_id, name, value) VALUES (X, 'svga.autodetect', 'false');
INSERT INTO cloud.user_vm_details (vm_id, name, value) VALUES (X, 'svga.vramSize', Z);
````
* Start VM
* pr/1605:
CLOUDSTACK-9428: Add marvin test
CLOUDSTACK-9428: Fix for CLOUDSTACK-9211 - Improve performance
Signed-off-by: Rafael Weingärtner <rafael@apache.org>
DNS on VR should not be publically accessible as it may be prone to DNS
amplification/reflection attacks. This fixes the issue by only allowing VR
DNS (port 53) to be accessible from guest network cidr, as per the fix in:
https://issues.apache.org/jira/browse/CLOUDSTACK-6432
- Only allows guest network cidrs to query VR DNS on port 53.
- Includes marvin smoke test that checks the VR DNS accessibility checks from
guest and non-guest network.
- Fixes Marvin sshClient to avoid using ssh agent when password is provided,
previous some environments may have seen 'No existing session' exception without
this fix.
- Adds a new dnspython dependency that is used to perform dns resolutions in the
tests.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Often, patch and security releases do not require schema migrations or
data migrations. However, if an empty upgrade class and associated
scripts are not defined, the upgrade process will break. With this
change, if a release does not have an upgrade, a noop DbUpgrade is added
to the upgrade path. This approach allows the upgrade to proceed and
for the database to properly reflect the installed version. This change
should make the release process simpler as RMs no longer need to
rememeber to create this boilerplate code when starting a new release.
Beginning with the 4.8.2.0 and 4.9.1.0 releases, the project will
formally adopt a four (4) position release number to properly accomodate
rekeases that contain only CVE fixes. The DatabaseUpgradeChecker and
Version classes made assumptions that they would always parse and
compare three (3) position version numbers. This change adds the
CloudStackVersion value object that supports both three (3) and four (4)
version numbers. It encapsulates version comparsion logic, as well as,
the rules to allow three (3) and four (4) to interoperate.
* Modifies DatabaseUpgradeChecker to handle derive an upgrade path for
a version that was not explicitly specified. It determines the
releases the first release before it with database migrations and uses
that list as the basis for the list for version being calculated. A
noop upgrade is then added to the list which causes no schema changes
or data migrations, but will update the database to the version.
* Adds unit tests for the upgrade path calculation logic in
DatabaseUpgradeChecker
* Removes dummy upgrade logic for the 4.8.2.0 introduced in previous
versions of this patch
* Introduces the CloudStackVersion value object which parses and
compares three (3) and four (4) position version numbers. This class
is intended to replace com.cloud.maint.Version.
* Adds the junit-dataprovider dependency -- allowing test data to be
concisely generated separately from the execution of a test case.
Used extensively in the CloudStackVersionTest.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
In several of the list_acl_tests, the tests run for simulator only where
in the (class) setup domains and accounts are created for the test. When the
tests end the (class) teardown methods would delete and remove these resources.
Due to dependence of one of the resources on the other, domain2 on domain1,
domain2 needs to be removed/cleaned up before domain1. Due to this issue,
several Travis test runs have failed in the past such as:
https://travis-ci.org/apache/cloudstack/jobs/152610967https://travis-ci.org/apache/cloudstack/jobs/152610968
Changing the order of cleanup fixes the tests.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
