This PR contains 3 features
- IPv4 Static Routing (Routed mode) #9346
Design document: https://cwiki.apache.org/confluence/pages/viewpage.action?pageId=306153967
- AS Numbers Management #9410
Design Document: https://cwiki.apache.org/confluence/display/CLOUDSTACK/BGP+AS+Numbers+Management
- Dynamic routing
Design Document: https://cwiki.apache.org/confluence/pages/viewpage.action?pageId=315492858
- Document: https://github.com/apache/cloudstack-documentation/pull/419
Rename nsx mode to routing mode
by
```
git grep -l nsx_mode |xargs sed -i "s/nsx_mode/routing_mode/g"
git grep -l nsxmode |xargs sed -i "s/nsxmode/routingmode/g"
git grep -l nsxMode |xargs sed -i "s/nsxMode/routingMode/g"
git grep -l NsxMode |xargs sed -i "s/NsxMode/RoutingMode/g"
```
- re-organize sql changes
- fix NPE as rules do not have public ip
- fix missing destination cidr in ingress rules
- disable network usage for routed network
- fix DB exception as network_id is -1 during network creation
- apply ingress/egress routing rules
- VR changes to configure nft rules for isolated network
- VR: setup nft rule for control network
- VR: flush all iptables rules
- fix NPE which is because ingress rules do not have public ip associated
- fix dest cidr is missing in nft tables
- add ip4 routing and ip4 routes to list network and list vpc response
- fix ingress rule is missing when vr is restarted
- fix icmp types in nft rules
- add tab to manage routing firewall rules
- fix ingress rules are not applied when VR is restarted
- add default rules in FORWARD chain
- fix create vpc offerings
- fix public ip is not assigned to vpc
- fix network offering is not listed when create vpc tier
- add is_routing to boot args of vpc vr
- remove table ip4_firewall in vpc vr
- release or remove subnet when remove a network
- implemenent fw_vpcrouter_routing
- fix wrong ip familty when flush ipv4 rules
- fix acl rules are not applied due to wrong version (should be 6 which means ip6 rules are removed)
- add default rules for vpc tiers so that tcp connections (e.g. ssh) work
- append policy rules after default rules
- remove /usr/local/cloud/systemvm/ in routers
- throw an exception when allocate subnet with cidrsize
- fix some TODOs
- add new parameters to update API
- return type Ipv4GuestSubnetNetworkMap when get or create subnet
- fix firewall rules are broken
- add domain_id and account_id to db
- add domain/account/project to ipv4 subnet response
- create ipv4 subnet for domain/account/project
- check conflict when update ipv4 subnet
- ui changes
- add parent subnet to response
- add list for ipv4 subnet
- implement some methods
- fix list subnets for guest networks by zoneid
- UI changes
- fix delete ipv4 subnet for network
- fix ipv4 subnet is set to zone guest network cidr if cidrsize is specified
- add zone info to response if parent subnet is null but network is not
- fix gateway/cidr is not set when create network with cidrsize
- fix order of nft rules in the VRs
* Routed v24
- add classes in marvin base.py
* Routed v25
- add test_01_subnet_zone
- fix dedicate to domain/account failure
- list subnets for network by keyword and subnet
* Routed v26: implement subnet auto-allocation
- add utils for split ip ranges into small subnets
- add utils to get start/end ip of a cidr
- implement subnet auto-generation
- add global settings
* Routed 27: add subnet for VPC
- add db column for vpc_id
- add db record for vpc
- remove db record when delete a vpc
- add checkConflicts methods
- remove duplicated settings
- check ipv4 cidr when create subnet
* Routed v28: update smoke tests
- update test_ipv4_routing.py
- search subnets by networkid
* Routed 29: fix vpc and add more tests
- fix createnetwork in vpc
- add vpc id/name to response
- fix zone id/name are not displayed in some cases
- add smoke test for vpc
- add smoke tests for failed cases
- add smoke test for connectivity checks
- marvin: add "-q" to ssh command
* Routed 31: ui and smoke tests
- UI: add link to network in list view
- add nftables rules check in VRs
* Routed 32: add chain OUTPUT and more rules
- fix the issue 80/443/8080 is not reachable from VR itself
```
2024-06-27 10:21:52,121 INFO Executing: systemctl start cloud-password-server@172.31.1.1
2024-06-27 10:21:52,128 INFO Service cloud-password-server@172.31.1.1 start
2024-06-27 10:21:52,129 INFO Executing: ps aux
2024-06-27 10:24:02,175 ERROR Failed to update password server due to: <urlopen error [Errno 110] Connection timed out>
```
* Routed: fix dns search from VMs in Isolated networks
* Routed: fix VPC dns issue due to gateway IP is missing in cloud.conf
This is caused by NSX integration, and fixed by
https://github.com/apache/cloudstack/pull/9102/
* Routed: rename routing_mode to network_mode
* Routed: replace centos5.5 template in smoke test as dhclient does not work in the vms
// this does not work
refer to https://dominikrys.com/posts/disable-udp-checksum-validation/#ignoring-udp-checksums-with-nftables
and
https://forum.openwrt.org/t/udp-checksum-with-nftables/161522/11
the vm should have checksum offloading disabled
* Routed: fix smoke test due to wrong cidrlist of egress rules and missing ingress rule from VR
* PR 9346: fix lint error schema-41910to42000.sql
* PR 9346: ui polish v1
* PR 9346: create VPC with cidrsize
* Routed: fix test failures with test_network_ipv6 and test_vpc_ipv6 due to 'ssh -q'
* Routed: fix /usr/local/cloud/systemvm/ are removed after SSVM/CPVM reboot
* Routed: fix IP of additional nics of VPC VR is not gateway
* PR 9346: fix cidrsize check when create VPC with cidrsize
* Routed: fix test/integration/smoke/test_ipv4_routing.py:279:16: E713 test for membership should be 'not in'
* PR9346: fix/Update api
* PR 9346: set response object name
* PR9346: UI refactor and small fixes
* PR9346: change return type of getNetworkMode
* PR9346: move IPv4 subnet to seperated tab
* PR9346: revert IpRangesTabGuest.vue back to original
* PR9346: fix remove ipv4 subnet on UI
* PR9346: fix test_ipv4_routing.py
* AS Number Range Management
* Create AS Number Range for a Zone
* Fix build
* Add ListASNRange and fix create ASN range
* Add List AS numbers
* Add UI for AS Numbers
* Fix UI and filter AS Numbers
* Add AS Number on Isolated network creation and refactor UI and response
* Release AS Number
* Add network offering new columns
* Add UI support to view and add AS number and configure network offering
* Automatically assign AS Number if not specify AS number
* update variable name
* Fix routing mode check
* UI: Only allow selecting AS number when routing mode is Dynamic and specifyAsNumber is true
* UI: Only pass AS number when supported by the network offering
* Release AS number on network deletion
* Add deleteASNRange command (#81)
* API: List ASNumbers by asnumber (#83)
---------
Co-authored-by: Pearl Dsilva <pearl1594@gmail.com>
* AS number management extensions
* Support AS number on VPC tier creation based on the offering
* Fix delete AS Range
* Fix UI values
* UI: Minor fix for releasing AS number
* UI: Move management of AS Range to Zone details view
* Fix specify_as_number column in network_offering table to set the default false
* Add events for AS number operations
* Allow users to list AS Numbers and fix network form for Normal users
* Add AS number details to list networks response
* Fix Allocated time format
* Fix Allocated time format
* support in details view too
* Fix: Do not release AS number if acquired network requires AS number
* Fix: Do not release AS number if acquired network requires AS number
* Fix typo
* Fix allocated release
* Fix event type
* UI: Add Routing mode and Specify AS to the network offering details
* UI: Add Routing mode and Specify AS to the network offering details
* Address comment
* Fix release AS number of network deletion
* Fix release AS number of network deletion
* Fix
* Restore release to its place based on the boolean
* Rename boolean
* API: Add networkId as listASNumber parameter
* Add Network name to the search view filter for AS numbers
* Present allocated time in human readable format - Pubilc IP / AS Numbers
* Add account / domain filter for AS numbers
* Add support for AS numbers on VPC offerings
* Refactor AS number allocation to VPC and non VPC isolated networks
* Checkstyle
* Add support for AS numbers on VPC offerings
* extend vpc offering view and vpcoffering response
* merge https://github.com/shapeblue/cloudstack-playtika/pull/115 and change network_id of as_numbers to include vpc_id
* Display AS number of VPC tiers as the AS number of the VPC
* extend asnumber response and ui support
* improve UI and as number response to view VPC details
* List only dynamic offerings for vpc tiers with specify as numbers
* Fix release AS number
* Fix AS number displayed as 0 when no AS number assigned
* Fix VPC offering creation without specify AS
---------
Co-authored-by: nvazquez <nicovazquez90@gmail.com>
* Fix release AS number on VPC deletion
* Update server/src/main/java/com/cloud/dc/BGPServiceImpl.java
* Update server/src/main/java/com/cloud/dc/BGPServiceImpl.java
* Fix missing column on asnumber table
* Fix listASNumbers API to support vpcid and obtain AS number from vpc for tiers
* Prevent listing 0 AS number for VPC
* Fix create Isolated Network form
* Update server/src/main/java/com/cloud/network/vpc/VpcManagerImpl.java
* Update server/src/main/java/com/cloud/network/vpc/VpcManagerImpl.java
* Dynamic: move routingmode/specifyasn after networkmode in AddNetworkOffering.vue on UI
* Dynamic: fix ip4routing in network response
* Dynamic/systemvm: add FRR to systemvm template
* Dynamic: BGP peers (DB,VO,Dao)
* Dynamic: BGP peers (VR/server)
* Dynamic: v3
- remove BgpPeer class
- fix vpc vr has bgp peers of only 1 tier
- rename ip4_cidr to guest_ip4_cidr
- rename ip6_cidr to guest_ip6_cidr
- generate /etc/frr/frr.conf
- apply BGP peers on Dynamic-Routed network even if there is no BGP peers
* Dynamic v4: fix vpc vr
- fix duplicated guest cidr in frr.conf in vpc vr
todo
- restart frr / reload frr (reload will cause bgp session to Policy state)
- apis for bgp peers
- assign/release bgp peer from/to network
* Dynamic v5: add apis for bgp peers
* Dynamic v6: fix bugs
- set response object name
- remove required as number when update
- fix checks when update
- allow regular users to list bgp peers
* Dynamic v7: move apis to bgp sub-dir
* Dynamic v8: add tab for manage BGP peers on UI
* Dynamic v9: fix update bgp with same config
* Dynamiv v10: add changeBgpPeersForNetworkCmd
* Dynamic v11: create network with bgppeerids
- create network with bgppeerids
- add marvin classes
- add smoke tests
- remove uuid from bgp_peer_network_map
- fix created/removed in bgp_peer_network_map
- remove bgppeers when remove a network
- UI: fix delete bgp peer
* Dynamic v12: add test for vpc tiers
* Dynamic v13: bug fixes
- fix change BGP peers for network in Allocated state
- fix listing network returns removed record
- fix all vpc tiers have the same settings
- remove BGP peers as part of network removal
- remove FRR settings for vpc tiers without any BGP peers
- UI: fix no error msg when change BGP peers
* Dynamic v14: assign BGP Peers for VPC instead of VPC tiers
- create vpc with bgppeerids
- do not allow create/update vpc tier with bgppeerids
- apply all bgp peers when create/delete a vpc tier
- UI: change bgp peers for vpc
- test: update tests on vpc
* Dynamic: fix build errors after merging as number PR
* Dynamic: fix TODOs
* Dynamic: fix smoke test on VPC
* Allow creation of networks by users with as numbers
* Address review comments
* Move BGPService to bgp package and inject it on BaseCmd
* Revert changes for CKS and address more comments
* Display left side menu option for AS number only for root admin
* Dynamic: create/update BGP peer with details
refer to https://docs.frrouting.org/en/latest/bgp.html
* Dynamic: fix build error and remove access to ListBgpPeers cmd for regular users
* Dynamic: assign all zone BGP peers to user networks
* Dynamic: show BGP peer info of networks only for root admin
* AS number: disable specifyasnumber for non-NSX offerings
* Dynamic: pass bgppeer details to command and fix typo with ip6 addr
* Dynamic: list BGP peers by isdedicated, and fix change bgppeers for network/vpc
* Dynamic: add UI labels
* Dynamic: add bgp peers to vpc response
* Dynamic: list bgp peers by keyword, fix list by asnumber
* Dynamic: fix list bgppeers by keyword and db schema
* Dynamic: fix list bgppeers do not return dedicated peers
* Dynamic: update UI when create network/vpc offering
* Update server/src/main/java/com/cloud/configuration/ConfigurationManagerImpl.java
Co-authored-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* Update tools/marvin/setup.py
* Dynamic: network mode must be same when update a network with new offering
* Dynamic: add method networkModel.isAnyServiceSupportedInNetwork
* Dynamic: rename APIs and classes
* Dynamic: fix unit tests due to previous changes
* Dynamic: validateNetworkCidrSize when auto-create subnet
* Dynamic: check AS number overlap
* Dynamic: add ActionEvent
* Dynamic: small code optimization
* Dynamic: fix ui bugs after api rename
* Dynamic: add marvin and test for ASN ranges and AS numbers
* Dynamic: add account setting use.system.bgp.peers
also
- change the default value of routed.ipv4.vpc.max.cidr.size and routed.ipv4.vpc.min.cidr.size
- change the category of settings
* static: fix ui error when delete zone ipv4 subnets
* static: small UI polish
* Dynamic: throw exception when as number is required but not passed
* Dynamic: fix typo when create FRR directory which causes network deletion failures
* Dynamic: connect to ALL (or ALL dedicated) BGP peers if no BGP peer mapping for the network/vpc
* Dynamic: throw exception when as number is required for VPC but not passed
* Dynamic: list bgp peers by useSystemBgpPeers
* Dynamic: fix frr config in VPC VR when change bgp peers
* Dynamic: create frr config even if there is no VPC tiers
* Dynamic: list bgp peers by zoneid (required for account) and account
* Dynamic: only apply FRR config for vpc tiers with dynamic routing
* Dynamic: donot send commands to router if commands size is 0
* Dynamic: fix 'new IPv6 address is not valid' when update bgp peer without IPv6
* Dynamic: throw exception if fail to allocate AS number when create network/vpc with dynamic routing
* Dynamic: enable ipv6 unicast and 'ip nht resolve-via-default'
* Dynamic: delete network/vpc if fail to allocate AS number when create network/vpc with dynamic routing
* test: add unit tests for ASN APIs
* test: add unit tests for core module
* test: add unit tests for API responses
* test: add unit tests for BgpPeerTO
* test: add minor changes
* test: add tests for create/delete/update/list RoutingFirewallRuleCmd
* Static: show ip4 routes for vpc tiers
* test: fix smoke test failure caused by type change of as number
* test: add test for Ipv4SubnetForZoneCmd
* test: add test for Ipv4SubnetForGuestNetworkCmd and BgpPeerCmd
* UI: do not show redundant router when network mode is ROUTED as RVR is not supported
* UI: hide 'Conserve mode' when networkmode is ROUTED
* test: add unit tests for ListASNumbersCmdTest
* Static: remove allocated IPv4 subnet when delete a network or vpc
* test: add unit tests for BgpPeersRules
* Dynamic: set ipv4routing from network offering
* server: list as numbers and ipv4 subnets by keyword
* server: remove dedicated bgp peers and ipv4 subnets when delete an account or domain
* server: fix dedicated ipv4 subnet is allocated to other accounts
* UI: fix allocated time format
* server: ignore project is projectid is -1 so bgppeers/ipv4subnets works in project view
* UI: add project column to bgp peers and ipv4 subnets
* server: fix list AS numbers by domain admin or normal user
* server: fix network creation when ipv4 subnet is dedicated
* UI: polish network.js
* Dynamic: fix frr config for ipv6 routing
* Static routing: support cks cluster
* Static: get/create IPv4 subnet from dedicated subnets at first
* Dynamic: add BGP peers tab
* Static: remove redundant loops
* api: add since to api and response
* server: add unit tests
---------
Co-authored-by: Nicolas Vazquez <nicovazquez90@gmail.com>
Co-authored-by: Pearl Dsilva <pearl1594@gmail.com>
Co-authored-by: Harikrishna Patnala <harikrishna.patnala@gmail.com>
Co-authored-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
Co-authored-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* reface quotaTariffList process and add listOnlyRemoved parameter
* add unit tests for createQuotaTariffResponse and isUserAllowedToSeeActivationRules methods
* update QuotaTariffListCmdTest
* refactor quota tariffs creation
* refactor quota tariffs update
* fix unit test in JsInterpreter
* remove unused import
* refactor quota listing and add quota deletion
* add functionality to create tariff from UI, not working when specifying dates
* fix date parsing
* add labels
* fix details view of tariffs
* new update tariff view
* fix filter placeholder
* remove debug html
* add labels
* make value field to be required when updating a tariff
* add labels
* add portuguese labels
* remove unused label
* fix updating tariff when there was no enddate specified
* refactor dates
* refactor dates
* clear code
* update disabled dates in date picker
* clear ListView component
* fix unnecessary updates when the new end date was equal to the exising end date
* fix when today was selected to start date
* add keyword to filter
* change usage type response
* add keyword and usagetype filter on UI
* fix disabled end dates in date picker
* modify datepickers to use datetime
* small fixes
* make value an unrequired field on update form
* remove duplicate import
* remove unused css classes
* add UI support for position parameter
* resize input fields to fill all available horizontal space
* remove console.log()
* remove unnecessary fully qualified names
* replace `usagetypeid` property name to `id` on `listUsageTypes` API call
* replace `usagetypeid` property name to `id` on `listUsageTypes` API call
This PR adds a new UI tool for admins for viewing and downloading usage records.
This PR also makes startdate and enddate as non required params for generateUsageRecords. (Fixes: #7133)
- Changes behaviour of details param handling via global setting:
- listVirtualMachines API: when the details param is not provided, it returns whether stats are returned controlled by a new global setting `list.vm.default.details.stats`
- listVirtualMachinesMetrics API: when the details param is not provided, it uses `all` details including `stats`
- Users who are affected slow performance of the listVirtualMachines API response time can set `list.vm.default.details.stats` to `false`
- Remove ConfigKey vm.stats.increment.metrics.in.memory which was renamed to `vm.stats.increment.metrics` in #5984 and also remove unused/unnecessary global settings via upgrade path
- Changes default value of VM stats accumulation setting `vm.stats.increment.metrics` to false until a better solution emerges. Since #5984, this is true and during the execution of listVM APIs the stats are clubbed/calculated which can immensely slow down list VM API calls. Any costly operations such as summing of stats shouldn't be done during the course of a synchronous API, such as the list VM API.
- Fix UI that uses listVirtualMachinesMetrics to not call `stats` detail when in list view without metrics selected.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
The Default View has a projects toggle button that allows users to see which resources belong to projects, but there is nothing to indicate which project they belong to.
For this reason, a project column was added if the projects button is enabled, indicating the name of the project to which the resource belongs.
---------
Co-authored-by: Henrique Sato <henrique.sato@scclouds.com.br>
OAuth2, the industry-standard authorization or authentication framework, simplifies the process of
granting access to resources. CloudStack supports OAuth2 authentication wherein users can login into
CloudStack without using a username and password. Support for Google and Github providers has been added.
Other OAuth2 providers can be easily integrated with CloudStack using its plugin framework.
The login page will show provider options when the OAuth2 is enabled and corresponding providers are configured.
"OAuth configuration" sub-section is present under "Configuration" where admins can register the corresponding
OAuth providers.
This PR aims at improving the CloudStack dashboard and introduces the following:
Admin dashboard: six cards that are responsive to screen sizes and show zone specific compute, storage and network allocation, as well as instance/hosts stats, alerts and events. Now, by default, the admin dashboard shows aggegate data from all zones, with option for admin to select individual zone to see individual zone stats
Account/project dashboard: six cards that are responsive to screen sizes and show account or project specific resource lists/counts, and limits shown in three cards as (a) compute (with running stopped instances), (b) storage and (c) network allocation, an admin-defined links/docs card (via config.json) and events cards. Admin is allowed to configure project limits on project dashboards.
A global create button on the top global header/user-menu to allow for quick actions such as to deploy a VM, CKS cluster and create a volume (more actions can be added as desired via code changes) etc.
Doc PR - apache/cloudstack-documentation#349
---------
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This would fix the case of multiple items return in API response for a
resource such as a template or ISO in case of multi-zone env.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* ui: speed up compute instance listing
The default listVirtualMachinesMetrics APIs assumings details=all which
isn't really used in the list view. By changing this to a subset of
details, we can see gains upto 10x in listing speed in the UI. When
moving to the resource/detail view of the UI, don't pass state or
details so `all` the details of the instance are returned.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Update AutogenView.vue
---------
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Added a new getter 'allProjects' and mutation 'RELOAD_ALL_PROJECTS' to centralize the tracking of available projects in the state.
This eliminates direct manipulation of the Project list in separate components and improves data consistency across the application.
A watcher in ProjectMenu.vue has been implemented to handle changes to the 'allProjects' getter.
The 'RELOAD_ALL_PROJECTS' mutation was also added where necessary to ensure projects list is updated in the state whenever changes occur.
After forward merged from 4.18->main, found a regression due to
3c25a3542655f29543624bcb7b6940afdb20937e where any columns which are
custom functions don't render. Such as metrics columns.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* 4.18:
UI: Filter templates by zone and hypervisor type when reinstall a VM (#7739)
KVM: fix SSVM starting when overprovisioning memory (#7663)
pom.xml: add property project.systemvm.template.location (#7706)
cloudutils: fix adding rocky9 host failure due to missing /etc/sysconfig/libvirtd (#7779)
server: get id from persisted object ReservationVO (#7785)
search in (too) large result sets (#7766)
ui: fix 404 error when list volumes of system vms (#7772)
packaging: install tzdata-java on centos7/centos8 (#7768)
There are tools like cluster-api which create and manage kubernetes cluster on CloudStack. This PR adds the option to add unmanaged kubernetes cluster which are not managed by CKS plugin. This helps provide a consolidated view of unmanaged clusters on CloudStack. The changes done make sure that operations for managed clusters are not executed for unmanaged clusters.
Two new APIs have also been added:
1. addVirtualMachinesToKubernetesCluster - to add VMs to unmanaged clusters.
2. removeVirtualMachinesFromKubernetesCluster - to remove VMs to unmanaged clusters.
Two APIs have been updated:
1. createKubernetesCluster - made KUBERNETES_VERSION_ID, SERVICE_OFFERING_ID, SIZE as not required for unmanaged clusters. Add an additional parameter, managed, which is true by default.
2. listKubernetesClusters - Add a parameter managed to filter on managed field.
Co-authored-by: Pearl Dsilva <pearl1594@gmail.com>
Co-authored-by: dahn <daan.hoogland@gmail.com>
* Guest OS mapping improvements
- Checks the OS mapping name in hypervisor (VMware, XenServer)
- Displays guest OS mappings in UI
* Added API getHypervisorGuestOsNames to list the guest OS names in the hypervisor, and code improvements
* Some static analysis fixes
* Removed commented code in listview
* Guest OS list
* UI changes for adding guest os and mappings
* Added guest os mappings in guest os form
* Added new filter to guest os mapping
* Name and description changes
* VMWare Host and cluster MO unit tests
* CheckGuestOsMapping command and answer unit tests
* GetHypervisorGuestOsNames command and answer unit tests
* VmwareResource unitests
* GuestOsMapper unittests
* icon changes
* Addressed review comments
* Renaming fixes
* Removed comments
* marvin tests for guest os operations
* Added marvin tests for OS mappings
* Document links and UI improvements
* Added deduplication for the list guest OS API
* Fixed linter failure
* Few bug fixes and UI changes
* Few improvements
* Addressed code smells
* Fixed UI issues after rebase
---------
Co-authored-by: Suresh Kumar Anaparti <sureshkumar.anaparti@gmail.com>
Co-authored-by: Harikrishna Patnala <harikrishna.patnala@gmail.com>
* Better hover label and message for generate API/secret keys form
* Added a message to select network during instance deployment
* Removed project icon in dashboard listing
* Disable network operations for the user who does not have permission
* UI allignments
* added document help for sticky policy secion under load balancer
* Added tooltips and some form layout changes
* donot display options to configure when stickypolicy is none
* Network selection message allignment
* Fixed the grid view to be uniform in infra summary page
