* [routers] distiction between fatal failure and warning or unknown on healthchecks
* UI status for router health checks
* status from scripts varied
* automation signalled errors
* revert removal of update sql
* upgradeversion
* move config item and further cleanup
* handling services better
* backwards compatible response
---------
Co-authored-by: Daan Hoogland <dahn@apache.org>
The Netris Plugin introduces Netris as a network service provider in CloudStack to be able to create and manage Virtual Private Clouds (VPCs) in CloudStack, being able to orchestrate the following network functionalities:
- Network segmentation with Netris-VXLAN isolation method
- Routing between "public" IP and network segments with an ACS ROUTED mode offering
- SourceNAT, DNAT, 1:1 NAT between "public" IP and network segments with an ACS NATTED mode offering
- Routing between VPC network segments (tiers in ACS nomenclature)
- Access Lists (ACLs) between VPC tiers and "public" network (TCP, UDP, ICMP) both as global egress rules and "public" IP specific ingress rules.
- ACLs between VPC network tiers (TCP, UDP, ICMP)
- External load balancing – between VPC network tiers and "public" IP
- Internal load balancing – between VPC network tiers
- CloudStack Virtual Router services (DHCP, DNS, UserData, Password Injection, etc…)
CKS Enhancements:
* Ability to specify different compute or service offerings for different types of CKS cluster nodes – worker, master or etcd
* Ability to use CKS ready custom templates for CKS cluster nodes
* Add and Remove external nodes to and from a kubernetes cluster
Co-authored-by: nvazquez <nicovazquez90@gmail.com>
* Update remove node timeout global setting
* CKS/NSX : Missing variables in worker nodes
* CKS: Fix ISO attach logic
* CKS: Fix ISO attach logic
* address comment
* Fix Port - Node mapping when cluster is scaled in the presence of external node(s)
* CKS: Externalize control and worker node setup wait time and installation attempts
* Fix logger
* Add missing headers and fix end of line on files
* CKS Mark Nodes for Manual Upgrade and Filter Nodes to add to CKS cluster from the same network
* Add support to deploy CKS cluster nodes on hosts dedicated to a domain
---------
Co-authored-by: Pearl Dsilva <pearl1594@gmail.com>
* Support unstacked ETCD
---------
Co-authored-by: nvazquez <nicovazquez90@gmail.com>
* Fix CKS cluster scaling and minor UI improvement
* Reuse k8s cluster public IP for etcd nodes and rename etcd nodes
* Fix DNS resolver issue
* Update UDP active monitor to ICMP
* Add hypervisor type to CKS cluster creation to fix CKS cluster creation when External hosts added
* Fix build
* Fix logger
* Modify hypervisor param description in the create CKS cluster API
* CKS delete fails when external nodes are present
* CKS delete fails when external nodes are present
* address comment
* Improve network rules cleanup on failure adding external nodes to CKS cluster
* UI: Fix etcd template was not honoured
* UI: Fix etcd template was not honoured
* Refactor
* CKS: Exclude etcd nodes when calculating port numbers
* Fix network cleanup in case of CKS cluster failure
* Externalize retries and inverval for NSX segment deletion
* Fix CKS scaling when external node(s) present in the cluster
* CKS: Fix port numbers displayed against ETCD nodes
* Add node version details to every node of k8s cluster - as we now support manual upgrade
* Add node version details to every node of k8s cluster - as we now support manual upgrade
* update column name
* CKS: Exclude etcd nodes when calculating port numbers
* update param name
* update param
* UI: Fix CKS cluster creation templates listing for non admins
* CKS: Prevent etcd node start port number to coincide with k8s cluster start port numbers
* CKS: Set default kubernetes cluster node version to the kubernetes cluster version on upgrade
* CKS: Set default kubernetes cluster node version to the kubernetes cluster version on upgrade
* consolidate query
* Fix upgrade logic
---------
Co-authored-by: nvazquez <nicovazquez90@gmail.com>
* Fix CKS cluster version upgrade
* CKS: Fix etcd port numbers being skipped
* Fix CKS cluster with etcd nodes on VPC
* Move schema and upgrade for 4.20
* Fix logger
* Fix after rebasing
* Add support for using different CNI plugins with CKS
* Add support for using different CNI plugins with CKS
* remove unused import
* Add UI support and list cni config API
* necessary UI changes
* add license
* changes to support external cni
* UI changes
* Fix NPE on restarting VPC with additional public IPs
* fix merge conflict
* add asnumber to create k8s svc layer
* support cni framework to use as-numbers
* update code
* condition to ignore undefined jinja template variables
* CKS: Do not pass AS number when network ID is passed
* Fix deletion of Userdata / CNI Configuration in projects
* CKS: Add CNI configuration details to the response and UI
* Explicit events for registering cni configuration
* Add Delete cni configuration API
* Fix CKS deployment when using VPC tiers with custom ACLs
* Fix DNS list on VR
* CKS: Use Network offering of the network passed during CKS cluster creation to get the AS number
* CKS cluster with guest IP
* Fix: Use control node guest IP as join IP for external nodes addition
* Fix DNS resolver issue
* Improve etcd indexing - start from 1
* CKS: Add external node to a CKS cluster deployed with etcd node(s) successfully
* CKS: Add external node to a CKS cluster deployed with etcd node(s) successfully
* simplify logic
* Tweak setup-kube-system script for baremetal external nodes
* Consider cordoned nodes while getting ready nodes
* Fix CKS cluster scale calculations
* Set token TTL to 0 (no expire) for external etcd
* Fix missing quotes
* Fix build
* Revert PR 9133
* Add calico commands for ens35 interface
* Address review comments: plan CKS cluster deployment based on the node type
* Add qemu-guest-agent dependency for kvm based templates
* Add marvin test for CKS clusters with different offerings per node type
* Remove test tag
* Add marvin test and fix update template for cks and since annotations
* Fix marvin test for adding and removing external nodes
* Fix since version on API params
* Address review comments
* Fix unit test
* Address review comments
* UI: Make CKS public templates visible to non-admins on CKS cluster creation
* Fix linter
* Fix merge error
* Fix positional parameters on the create kubernetes ISO script and make the ETCD version optional
* fix etcd port displayed
* Further improvements to CKS (#118)
* Multiple nics support on Ubuntu template
* Multiple nics support on Ubuntu template
* supports allocating IP to the nic when VM is added to another network - no delay
* Add option to select DNS or VR IP as resolver on VPC creation
* Add API param and UI to select option
* Add column on vpc and pass the value on the databags for CsDhcp.py to fix accordingly
* Externalize the CKS Configuration, so that end users can tweak the configuration before deploying the cluster
* Add new directory to c8 packaging for CKS config
* Remove k8s configuration from resources and make it configurable
* Revert "Remove k8s configuration from resources and make it configurable"
This reverts commit d5997033ebe4ba559e6478a64578b894f8e7d3db.
* copy conf to mgmt server and consume them from there
* Remove node from cluster
* Add missing /opt/bin directory requrired by external nodes
* Login to a specific Project view
* add indents
* Fix CKS HA clusters
* Fix build
---------
Co-authored-by: Nicolas Vazquez <nicovazquez90@gmail.com>
* Add missing headers
* Fix linter
* Address more review comments
* Fix unit test
* Fix scaling case for the same offering
* Revert "Login to a specific Project view"
This reverts commit 95e37563f48573780b07a038a7f48c0bc04e9b64.
* Revert "Fix CKS HA clusters" (#120)
This reverts commit 8dac16aa359faa6500ea1e1ce548169cfd08331a.
* Apply suggestions from code review about user data
Co-authored-by: Suresh Kumar Anaparti <sureshkumar.anaparti@gmail.com>
* Update api/src/main/java/org/apache/cloudstack/api/command/user/userdata/BaseRegisterUserDataCmd.java
Co-authored-by: Suresh Kumar Anaparti <sureshkumar.anaparti@gmail.com>
* Refactor column names and schema path
* Fix scaling for non existing previous offering per node type
* Update node offering entry if there was an existing offering but a global service offering has been provided on scale
---------
Co-authored-by: Pearl Dsilva <pearl1594@gmail.com>
Co-authored-by: Daan Hoogland <daan@onecht.net>
Co-authored-by: Suresh Kumar Anaparti <sureshkumar.anaparti@gmail.com>
* CKS: add ConfigDrive to cloud-init datasource_list in systemvm template
* systemvm template: update debian 11.7.0 iso url
* CKS: get K8S iso by LABEL=CDROM if config drive ISO is attached
* Revert "CKS: add ConfigDrive to cloud-init datasource_list in systemvm template"
This reverts commit b6863a5ce1b9757d7c5bbf3ba9720e2b61410c7d.
* CKS: patch cloud-init in opt/cloud/bin/setup/cksnode.sh
* PR7650: move ConfigDrive before CloudStack in datasource list
* Revert "CKS: patch cloud-init in opt/cloud/bin/setup/cksnode.sh"
This reverts commit 75be03c6aaf58e3939f59c657d84c6495538d3c2.
* CKS: fix ConfigDrive
This PR contains 3 features
- IPv4 Static Routing (Routed mode) #9346
Design document: https://cwiki.apache.org/confluence/pages/viewpage.action?pageId=306153967
- AS Numbers Management #9410
Design Document: https://cwiki.apache.org/confluence/display/CLOUDSTACK/BGP+AS+Numbers+Management
- Dynamic routing
Design Document: https://cwiki.apache.org/confluence/pages/viewpage.action?pageId=315492858
- Document: https://github.com/apache/cloudstack-documentation/pull/419
Rename nsx mode to routing mode
by
```
git grep -l nsx_mode |xargs sed -i "s/nsx_mode/routing_mode/g"
git grep -l nsxmode |xargs sed -i "s/nsxmode/routingmode/g"
git grep -l nsxMode |xargs sed -i "s/nsxMode/routingMode/g"
git grep -l NsxMode |xargs sed -i "s/NsxMode/RoutingMode/g"
```
- re-organize sql changes
- fix NPE as rules do not have public ip
- fix missing destination cidr in ingress rules
- disable network usage for routed network
- fix DB exception as network_id is -1 during network creation
- apply ingress/egress routing rules
- VR changes to configure nft rules for isolated network
- VR: setup nft rule for control network
- VR: flush all iptables rules
- fix NPE which is because ingress rules do not have public ip associated
- fix dest cidr is missing in nft tables
- add ip4 routing and ip4 routes to list network and list vpc response
- fix ingress rule is missing when vr is restarted
- fix icmp types in nft rules
- add tab to manage routing firewall rules
- fix ingress rules are not applied when VR is restarted
- add default rules in FORWARD chain
- fix create vpc offerings
- fix public ip is not assigned to vpc
- fix network offering is not listed when create vpc tier
- add is_routing to boot args of vpc vr
- remove table ip4_firewall in vpc vr
- release or remove subnet when remove a network
- implemenent fw_vpcrouter_routing
- fix wrong ip familty when flush ipv4 rules
- fix acl rules are not applied due to wrong version (should be 6 which means ip6 rules are removed)
- add default rules for vpc tiers so that tcp connections (e.g. ssh) work
- append policy rules after default rules
- remove /usr/local/cloud/systemvm/ in routers
- throw an exception when allocate subnet with cidrsize
- fix some TODOs
- add new parameters to update API
- return type Ipv4GuestSubnetNetworkMap when get or create subnet
- fix firewall rules are broken
- add domain_id and account_id to db
- add domain/account/project to ipv4 subnet response
- create ipv4 subnet for domain/account/project
- check conflict when update ipv4 subnet
- ui changes
- add parent subnet to response
- add list for ipv4 subnet
- implement some methods
- fix list subnets for guest networks by zoneid
- UI changes
- fix delete ipv4 subnet for network
- fix ipv4 subnet is set to zone guest network cidr if cidrsize is specified
- add zone info to response if parent subnet is null but network is not
- fix gateway/cidr is not set when create network with cidrsize
- fix order of nft rules in the VRs
* Routed v24
- add classes in marvin base.py
* Routed v25
- add test_01_subnet_zone
- fix dedicate to domain/account failure
- list subnets for network by keyword and subnet
* Routed v26: implement subnet auto-allocation
- add utils for split ip ranges into small subnets
- add utils to get start/end ip of a cidr
- implement subnet auto-generation
- add global settings
* Routed 27: add subnet for VPC
- add db column for vpc_id
- add db record for vpc
- remove db record when delete a vpc
- add checkConflicts methods
- remove duplicated settings
- check ipv4 cidr when create subnet
* Routed v28: update smoke tests
- update test_ipv4_routing.py
- search subnets by networkid
* Routed 29: fix vpc and add more tests
- fix createnetwork in vpc
- add vpc id/name to response
- fix zone id/name are not displayed in some cases
- add smoke test for vpc
- add smoke tests for failed cases
- add smoke test for connectivity checks
- marvin: add "-q" to ssh command
* Routed 31: ui and smoke tests
- UI: add link to network in list view
- add nftables rules check in VRs
* Routed 32: add chain OUTPUT and more rules
- fix the issue 80/443/8080 is not reachable from VR itself
```
2024-06-27 10:21:52,121 INFO Executing: systemctl start cloud-password-server@172.31.1.1
2024-06-27 10:21:52,128 INFO Service cloud-password-server@172.31.1.1 start
2024-06-27 10:21:52,129 INFO Executing: ps aux
2024-06-27 10:24:02,175 ERROR Failed to update password server due to: <urlopen error [Errno 110] Connection timed out>
```
* Routed: fix dns search from VMs in Isolated networks
* Routed: fix VPC dns issue due to gateway IP is missing in cloud.conf
This is caused by NSX integration, and fixed by
https://github.com/apache/cloudstack/pull/9102/
* Routed: rename routing_mode to network_mode
* Routed: replace centos5.5 template in smoke test as dhclient does not work in the vms
// this does not work
refer to https://dominikrys.com/posts/disable-udp-checksum-validation/#ignoring-udp-checksums-with-nftables
and
https://forum.openwrt.org/t/udp-checksum-with-nftables/161522/11
the vm should have checksum offloading disabled
* Routed: fix smoke test due to wrong cidrlist of egress rules and missing ingress rule from VR
* PR 9346: fix lint error schema-41910to42000.sql
* PR 9346: ui polish v1
* PR 9346: create VPC with cidrsize
* Routed: fix test failures with test_network_ipv6 and test_vpc_ipv6 due to 'ssh -q'
* Routed: fix /usr/local/cloud/systemvm/ are removed after SSVM/CPVM reboot
* Routed: fix IP of additional nics of VPC VR is not gateway
* PR 9346: fix cidrsize check when create VPC with cidrsize
* Routed: fix test/integration/smoke/test_ipv4_routing.py:279:16: E713 test for membership should be 'not in'
* PR9346: fix/Update api
* PR 9346: set response object name
* PR9346: UI refactor and small fixes
* PR9346: change return type of getNetworkMode
* PR9346: move IPv4 subnet to seperated tab
* PR9346: revert IpRangesTabGuest.vue back to original
* PR9346: fix remove ipv4 subnet on UI
* PR9346: fix test_ipv4_routing.py
* AS Number Range Management
* Create AS Number Range for a Zone
* Fix build
* Add ListASNRange and fix create ASN range
* Add List AS numbers
* Add UI for AS Numbers
* Fix UI and filter AS Numbers
* Add AS Number on Isolated network creation and refactor UI and response
* Release AS Number
* Add network offering new columns
* Add UI support to view and add AS number and configure network offering
* Automatically assign AS Number if not specify AS number
* update variable name
* Fix routing mode check
* UI: Only allow selecting AS number when routing mode is Dynamic and specifyAsNumber is true
* UI: Only pass AS number when supported by the network offering
* Release AS number on network deletion
* Add deleteASNRange command (#81)
* API: List ASNumbers by asnumber (#83)
---------
Co-authored-by: Pearl Dsilva <pearl1594@gmail.com>
* AS number management extensions
* Support AS number on VPC tier creation based on the offering
* Fix delete AS Range
* Fix UI values
* UI: Minor fix for releasing AS number
* UI: Move management of AS Range to Zone details view
* Fix specify_as_number column in network_offering table to set the default false
* Add events for AS number operations
* Allow users to list AS Numbers and fix network form for Normal users
* Add AS number details to list networks response
* Fix Allocated time format
* Fix Allocated time format
* support in details view too
* Fix: Do not release AS number if acquired network requires AS number
* Fix: Do not release AS number if acquired network requires AS number
* Fix typo
* Fix allocated release
* Fix event type
* UI: Add Routing mode and Specify AS to the network offering details
* UI: Add Routing mode and Specify AS to the network offering details
* Address comment
* Fix release AS number of network deletion
* Fix release AS number of network deletion
* Fix
* Restore release to its place based on the boolean
* Rename boolean
* API: Add networkId as listASNumber parameter
* Add Network name to the search view filter for AS numbers
* Present allocated time in human readable format - Pubilc IP / AS Numbers
* Add account / domain filter for AS numbers
* Add support for AS numbers on VPC offerings
* Refactor AS number allocation to VPC and non VPC isolated networks
* Checkstyle
* Add support for AS numbers on VPC offerings
* extend vpc offering view and vpcoffering response
* merge https://github.com/shapeblue/cloudstack-playtika/pull/115 and change network_id of as_numbers to include vpc_id
* Display AS number of VPC tiers as the AS number of the VPC
* extend asnumber response and ui support
* improve UI and as number response to view VPC details
* List only dynamic offerings for vpc tiers with specify as numbers
* Fix release AS number
* Fix AS number displayed as 0 when no AS number assigned
* Fix VPC offering creation without specify AS
---------
Co-authored-by: nvazquez <nicovazquez90@gmail.com>
* Fix release AS number on VPC deletion
* Update server/src/main/java/com/cloud/dc/BGPServiceImpl.java
* Update server/src/main/java/com/cloud/dc/BGPServiceImpl.java
* Fix missing column on asnumber table
* Fix listASNumbers API to support vpcid and obtain AS number from vpc for tiers
* Prevent listing 0 AS number for VPC
* Fix create Isolated Network form
* Update server/src/main/java/com/cloud/network/vpc/VpcManagerImpl.java
* Update server/src/main/java/com/cloud/network/vpc/VpcManagerImpl.java
* Dynamic: move routingmode/specifyasn after networkmode in AddNetworkOffering.vue on UI
* Dynamic: fix ip4routing in network response
* Dynamic/systemvm: add FRR to systemvm template
* Dynamic: BGP peers (DB,VO,Dao)
* Dynamic: BGP peers (VR/server)
* Dynamic: v3
- remove BgpPeer class
- fix vpc vr has bgp peers of only 1 tier
- rename ip4_cidr to guest_ip4_cidr
- rename ip6_cidr to guest_ip6_cidr
- generate /etc/frr/frr.conf
- apply BGP peers on Dynamic-Routed network even if there is no BGP peers
* Dynamic v4: fix vpc vr
- fix duplicated guest cidr in frr.conf in vpc vr
todo
- restart frr / reload frr (reload will cause bgp session to Policy state)
- apis for bgp peers
- assign/release bgp peer from/to network
* Dynamic v5: add apis for bgp peers
* Dynamic v6: fix bugs
- set response object name
- remove required as number when update
- fix checks when update
- allow regular users to list bgp peers
* Dynamic v7: move apis to bgp sub-dir
* Dynamic v8: add tab for manage BGP peers on UI
* Dynamic v9: fix update bgp with same config
* Dynamiv v10: add changeBgpPeersForNetworkCmd
* Dynamic v11: create network with bgppeerids
- create network with bgppeerids
- add marvin classes
- add smoke tests
- remove uuid from bgp_peer_network_map
- fix created/removed in bgp_peer_network_map
- remove bgppeers when remove a network
- UI: fix delete bgp peer
* Dynamic v12: add test for vpc tiers
* Dynamic v13: bug fixes
- fix change BGP peers for network in Allocated state
- fix listing network returns removed record
- fix all vpc tiers have the same settings
- remove BGP peers as part of network removal
- remove FRR settings for vpc tiers without any BGP peers
- UI: fix no error msg when change BGP peers
* Dynamic v14: assign BGP Peers for VPC instead of VPC tiers
- create vpc with bgppeerids
- do not allow create/update vpc tier with bgppeerids
- apply all bgp peers when create/delete a vpc tier
- UI: change bgp peers for vpc
- test: update tests on vpc
* Dynamic: fix build errors after merging as number PR
* Dynamic: fix TODOs
* Dynamic: fix smoke test on VPC
* Allow creation of networks by users with as numbers
* Address review comments
* Move BGPService to bgp package and inject it on BaseCmd
* Revert changes for CKS and address more comments
* Display left side menu option for AS number only for root admin
* Dynamic: create/update BGP peer with details
refer to https://docs.frrouting.org/en/latest/bgp.html
* Dynamic: fix build error and remove access to ListBgpPeers cmd for regular users
* Dynamic: assign all zone BGP peers to user networks
* Dynamic: show BGP peer info of networks only for root admin
* AS number: disable specifyasnumber for non-NSX offerings
* Dynamic: pass bgppeer details to command and fix typo with ip6 addr
* Dynamic: list BGP peers by isdedicated, and fix change bgppeers for network/vpc
* Dynamic: add UI labels
* Dynamic: add bgp peers to vpc response
* Dynamic: list bgp peers by keyword, fix list by asnumber
* Dynamic: fix list bgppeers by keyword and db schema
* Dynamic: fix list bgppeers do not return dedicated peers
* Dynamic: update UI when create network/vpc offering
* Update server/src/main/java/com/cloud/configuration/ConfigurationManagerImpl.java
Co-authored-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* Update tools/marvin/setup.py
* Dynamic: network mode must be same when update a network with new offering
* Dynamic: add method networkModel.isAnyServiceSupportedInNetwork
* Dynamic: rename APIs and classes
* Dynamic: fix unit tests due to previous changes
* Dynamic: validateNetworkCidrSize when auto-create subnet
* Dynamic: check AS number overlap
* Dynamic: add ActionEvent
* Dynamic: small code optimization
* Dynamic: fix ui bugs after api rename
* Dynamic: add marvin and test for ASN ranges and AS numbers
* Dynamic: add account setting use.system.bgp.peers
also
- change the default value of routed.ipv4.vpc.max.cidr.size and routed.ipv4.vpc.min.cidr.size
- change the category of settings
* static: fix ui error when delete zone ipv4 subnets
* static: small UI polish
* Dynamic: throw exception when as number is required but not passed
* Dynamic: fix typo when create FRR directory which causes network deletion failures
* Dynamic: connect to ALL (or ALL dedicated) BGP peers if no BGP peer mapping for the network/vpc
* Dynamic: throw exception when as number is required for VPC but not passed
* Dynamic: list bgp peers by useSystemBgpPeers
* Dynamic: fix frr config in VPC VR when change bgp peers
* Dynamic: create frr config even if there is no VPC tiers
* Dynamic: list bgp peers by zoneid (required for account) and account
* Dynamic: only apply FRR config for vpc tiers with dynamic routing
* Dynamic: donot send commands to router if commands size is 0
* Dynamic: fix 'new IPv6 address is not valid' when update bgp peer without IPv6
* Dynamic: throw exception if fail to allocate AS number when create network/vpc with dynamic routing
* Dynamic: enable ipv6 unicast and 'ip nht resolve-via-default'
* Dynamic: delete network/vpc if fail to allocate AS number when create network/vpc with dynamic routing
* test: add unit tests for ASN APIs
* test: add unit tests for core module
* test: add unit tests for API responses
* test: add unit tests for BgpPeerTO
* test: add minor changes
* test: add tests for create/delete/update/list RoutingFirewallRuleCmd
* Static: show ip4 routes for vpc tiers
* test: fix smoke test failure caused by type change of as number
* test: add test for Ipv4SubnetForZoneCmd
* test: add test for Ipv4SubnetForGuestNetworkCmd and BgpPeerCmd
* UI: do not show redundant router when network mode is ROUTED as RVR is not supported
* UI: hide 'Conserve mode' when networkmode is ROUTED
* test: add unit tests for ListASNumbersCmdTest
* Static: remove allocated IPv4 subnet when delete a network or vpc
* test: add unit tests for BgpPeersRules
* Dynamic: set ipv4routing from network offering
* server: list as numbers and ipv4 subnets by keyword
* server: remove dedicated bgp peers and ipv4 subnets when delete an account or domain
* server: fix dedicated ipv4 subnet is allocated to other accounts
* UI: fix allocated time format
* server: ignore project is projectid is -1 so bgppeers/ipv4subnets works in project view
* UI: add project column to bgp peers and ipv4 subnets
* server: fix list AS numbers by domain admin or normal user
* server: fix network creation when ipv4 subnet is dedicated
* UI: polish network.js
* Dynamic: fix frr config for ipv6 routing
* Static routing: support cks cluster
* Static: get/create IPv4 subnet from dedicated subnets at first
* Dynamic: add BGP peers tab
* Static: remove redundant loops
* api: add since to api and response
* server: add unit tests
---------
Co-authored-by: Nicolas Vazquez <nicovazquez90@gmail.com>
Co-authored-by: Pearl Dsilva <pearl1594@gmail.com>
Co-authored-by: Harikrishna Patnala <harikrishna.patnala@gmail.com>
Co-authored-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
Co-authored-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Prior to this PR
```
root@r-663-VM:/var/cache/cloud# gzip -dk vpn_user_list.json.aae73e2c-32ba-44f3-bf47-426933a67bcb.gz
root@r-663-VM:/var/cache/cloud# /opt/cloud/bin/update_config.py vpn_user_list.json.aae73e2c-32ba-44f3-bf47-426933a67bcb
{'id': 'vpnuserlist', 'test': {'add': True, 'password': 'test', 'user': 'test'}}
{'vpn_users': [{'user': 'test', 'password': 'test', 'add': True}], 'type': 'vpnuserlist', 'delete_from_processed_cache': False}
line = # Secrets for authentication using CHAP
line = # client server secret IP addresses
line =
line =
line = test * test *
```
with this PR
```
root@r-663-VM:/var/cache/cloud# gzip -dk vpn_user_list.json.aae73e2c-32ba-44f3-bf47-426933a67bcb.gz
root@r-663-VM:/var/cache/cloud# /opt/cloud/bin/update_config.py vpn_user_list.json.aae73e2c-32ba-44f3-bf47-426933a67bcb
root@r-663-VM:/var/cache/cloud#
```
* systemvm template changes, to explicitly update the module dependencies, vmware hardware version updated to 13, fsck added in grub
* Update systemvm template debian version to 12.7
