This PR addresses the issue raised at #4545 (Fail to change Service offering from local <> shared storage).
When upgrading a VM service offering it is validated if the new offering has the same storage scope (local or shared) as the current offering. I think that the validation makes sense in a way of preventing running Root disks with an offering that does not match the current storage pool. However, the validation only compares both offerings and does not consider that it is possible to migrate Volumes between local <> shared storage pools.
The idea behind this implementation is that CloudStack should check the scope of the current storage pool which the ROOT volume is allocated; this, it is possible to migrate the volume between storage pools and list/upgrade according to the offerings that are supported for such pool.
This PR also fixes an issue where the API command that lists offerings for a VM should follow the same idea and list based on the storage pool that the volume is allocated and not the previous offering.
Fixes: #4545
* prevent other vm disks getting deleted
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* vmware: fix inter-cluster stopped vm migration
Fixes#4838
For inter-cluster migration without shared storage, VMware needs a host to be specified. Fix is to specify an appropriate host in the target cluster.
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* fix detached volume inter-cluster migration
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* cleanup unused method
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* review changes
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* changes
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* vmware: allow attached volume migration using VmwareStorageMotionStrategy
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* find vm clusterid with multiple ROOT volumes
VM can have multiple ROOT volumes and some can be on zone-wide store therefore iterate over all of them till a cluster ID is found.
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* fix successive storage migration
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* fix intercluster check
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* refactor vm cluster, host method
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* remove inter-pod check
Added by mistake, VMware won't have pods
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* address review comment
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
While finding pools for volume migration list following compatible storages:
- all zone-wide storages of the same hypervisor.
- when the volume is attached to a VM, then all storages from the same cluster as that of VM.
- for detached volume, all storages that belong to clusters of the same hypervisor.
Fixes#4692Fixes#4400
Added support for PowerFlex/ScaleIO (v3.5 onwards) storage pool as a primary storage in CloudStack (for KVM hypervisor) and enabled VM/Volume operations on that pool (using pool tag).
Please find more details in the FS here:
https://cwiki.apache.org/confluence/x/cDl4CQ
Documentation PR: apache/cloudstack-documentation#169
This enables support for PowerFlex/ScaleIO (v3.5 onwards) storage pool as a primary storage in CloudStack
Other improvements addressed in addition to PowerFlex/ScaleIO support:
- Added support for config drives in host cache for KVM
=> Changed configuration "vm.configdrive.primarypool.enabled" scope from Global to Zone level
=> Introduced new zone level configuration "vm.configdrive.force.host.cache.use" (default: false) to force host cache for config drives
=> Introduced new zone level configuration "vm.configdrive.use.host.cache.on.unsupported.pool" (default: true) to use host cache for config drives when storage pool doesn't support config drive
=> Added new parameter "host.cache.location" (default: /var/cache/cloud) in KVM agent.properties for specifying the host cache path and create config drives on the "/config" directory on the host cache path
=> Maintain the config drive location and use it when required on any config drive operation (migrate, delete)
- Detect virtual size from the template URL while registering direct download qcow2 (of KVM hypervisor) templates
- Updated full deployment destination for preparing the network(s) on VM start
- Propagate the direct download certificates uploaded to the newly added KVM hosts
- Discover the template size for direct download templates using any available host from the zones specified on template registration
=> When zones are not specified while registering template, template size discovery is performed using any available host, which is picked up randomly from one of the available zones
- Release the VM resources when VM is sync-ed to Stopped state on PowerReportMissing (after graceful period)
- Retry VM deployment/start when the host cannot grant access to volume/template
- Mark never-used or downloaded templates as Destroyed on deletion, without sending any DeleteCommand
=> Do not trigger any DeleteCommand for never-used or downloaded templates as these doesn't exist and cannot be deleted from the datastore
- Check the router filesystem is writable or not, before performing health checks
=> Introduce a new test "filesystem.writable.test" to check the filesystem is writable or not
=> The router health checks keeps the config info at "/var/cache/cloud" and updates the monitor results at "/root" for health checks, both are different partitions. So, test at both the locations.
=> Added new script: "filesystem_writable_check.py" at /opt/cloud/bin/ to check the filesystem is writable or not
- Fixed NPE issue, template is null for DATA disks. Copy template to target storage for ROOT disk (with template id), skip DATA disk(s)
* Addressed some issues for few operations on PowerFlex storage pool.
- Updated migration volume operation to sync the status and wait for migration to complete.
- Updated VM Snapshot naming, for uniqueness in ScaleIO volume name when more than one volume exists in the VM.
- Added sync lock while spooling managed storage template before volume creation from the template (non-direct download).
- Updated resize volume error message string.
- Blocked the below operations on PowerFlex storage pool:
-> Extract Volume
-> Create Snapshot for VMSnapshot
* Added the PowerFlex/ScaleIO client connection pool to manage the ScaleIO gateway clients, which uses a single gateway client per Powerflex/ScaleIO storage pool and renews it when the session token expires.
- The token is valid for 8 hours from the time it was created, unless there has been no activity for 10 minutes.
Reference: https://cpsdocs.dellemc.com/bundle/PF_REST_API_RG/page/GUID-92430F19-9F44-42B6-B898-87D5307AE59B.html
Other fixes included:
- Fail the VM deployment when the host specified in the deployVirtualMachine cmd is not in the right state (i.e. either Resource State is not Enabled or Status is not Up)
- Use the physical file size of the template to check the free space availability on the host, while downloading the direct download templates.
- Perform basic tests (for connectivity and file system) on router before updating the health check config data
=> Validate the basic tests (connectivity and file system check) on router
=> Cleanup the health check results when router is destroyed
* Updated PowerFlex/ScaleIO storage plugin version to 4.16.0.0
* UI Changes to support storage plugin for PowerFlex/ScaleIO storage pool.
- PowerFlex pool URL generated from the UI inputs(Gateway, Username, Password, Storage Pool) when adding "PowerFlex" Primary Storage
- Updated protocol to "custom" for PowerFlex provider
- Allow VM Snapshot for stopped VM on KVM hypervisor and PowerFlex/ScaleIO storage pool
and Minor improvements in PowerFlex/ScaleIO storage plugin code
* Added support for PowerFlex/ScaleIO volume migration across different PowerFlex storage instances.
- findStoragePoolsForMigration API returns PowerFlex pool(s) of different instance as suitable pool(s), for volume(s) on PowerFlex storage pool.
- Volume(s) with snapshots are not allowed to migrate to different PowerFlex instance.
- Volume(s) of running VM are not allowed to migrate to other PowerFlex storage pools.
- Volume migration from PowerFlex pool to Non-PowerFlex pool, and vice versa are not supported.
* Fixed change service offering smoke tests in test_service_offerings.py, test_vm_snapshots.py
* Added the PowerFlex/ScaleIO volume/snapshot name to the paths of respective CloudStack resources (Templates, Volumes, Snapshots and VM Snapshots)
* Added new response parameter “supportsStorageSnapshot” (true/false) to volume response, and Updated UI to hide the async backup option while taking snapshot for volume(s) with storage snapshot support.
* Fix to remove the duplicate zone wide pools listed while finding storage pools for migration
* Updated PowerFlex/ScaleIO volume migration checks and rollback migration on failure
* Fixed the PowerFlex/ScaleIO volume name inconsistency issue in the volume path after migration, due to rename failure
- Fixes inter-cluster migration of VMs
- Allows migration of stopped VM with disks attached to different and suitable pools
- Improves inter-cluster detached volume migration
- Allows inter-cluster migration (clusters of same Pod) for system VMs, VRs on VMware
- Allows storage migration for stopped system VMs, VRs on VMware within same Pod if StoragePool cluster scopetype
Linked Primate PR: https://github.com/apache/cloudstack-primate/pull/789 [Changes merged in this PR after new UI merge]
Documentation PR: https://github.com/apache/cloudstack-documentation/pull/170
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* 4.15:
server: select root disk based on user input during vm import (#4591)
kvm: Use Q35 chipset for UEFI x86_64 (#4576)
server: fix wrong error message when create isolated network without SourceNat (#4624)
server: add possibility to scale vm to current customer offerings (#4622)
server: keep networks order and ips while move a vm with multiple networks (#4602)
server: throw exception when update vm nic on L2 network (#4625)
doc: fix typo in install notes (#4633)
* 4.14:
server: select root disk based on user input during vm import (#4591)
kvm: Use Q35 chipset for UEFI x86_64 (#4576)
server: fix wrong error message when create isolated network without SourceNat (#4624)
server: add possibility to scale vm to current customer offerings (#4622)
server: keep networks order and ips while move a vm with multiple networks (#4602)
server: throw exception when update vm nic on L2 network (#4625)
doc: fix typo in install notes (#4633)
This PR fixes an issue when move a vm from an account to another account.
Steps to reproduce the issue
(1) create a vm with multiple shared networks (in advanced zone, or advanced zone with security groups)
(2) create another account (in same domain who can also access the shared networks)
(3) move vm to new account, with a list of networkid
expected result: the vm has nics on the networks in same order as specified in API request, and nics have the same ips as before actual result: network order is not same as specified, ips are changed.
This feature enables the following:
Balanced migration of data objects from source Image store to destination Image store(s)
Complete migration of data
setting an image store to read-only
viewing download progress of templates across all data stores
Related Primate PR: apache/cloudstack-primate#326
While remove secondary nic from a Running vm, if update the default nic to the secondary nic before the nic is removed, the vm will not have default nic (and cannot be started) when both operations are completed.
It is because UpdateDefaultNic api is not handled as a vm work job (AddNicToVMCmd and RemoveNicFromVMCmd are), it is processed before nic is removed. The result is that secondary nic becomes default nic and got removed.
* Enable unmanaging guest VMs
* Minor fixes
* Fix stop usage event only if VM is not stopped when unmanaging
* Rename unmanaged VMs manager
* Generate netofferingremove usage event if VM is not stopped
* Generate usage event VM snapshot primary off when unmanaging
Repro Steps:
1. Create a VM on host1
2. Make host1 capacity full by deploying multiple VMs
3. Try Dynamic scaling on VM on host1
4. NPE occurs when MS tries to find host to migrate the VM and then scale.
Root cause: VM profile is not initiated properly with serviceoffering before planning for deployment
Solution: Iniate VM profile with serviceoffering and also make sure custom compute parameters are handled
Root cause:
Even though dynamic scaling job is handled in vmworkjob queue which ensures serilizing multiple jobs but the database updating and generating usage events are out of the job queue.
Solution:
Moved all updations into the job queue
Firstly I have tested all the scenarios to check if nothing is broken:
Scaling on a running VM with normal compute offering
Scaling on a stopped VM with normal compute offering
Scaling on a running VM with custom compute offering
Scaling on stopped VM with custom compute offering
Scaling on stopped/running VM between custom compute offering and normal compute offering and combinations among these. Checked if the custom parameters have been populated or deleted accordingly based on the offering to which the VM is scaled
Since this is a corner scenario I could not test the exact point where two usage events are recorded at the same time for two different API calls on same VM.
* Remove constraint for NFS storage
* Add new property on agent.properties
* Add free disk space on the host prior template download
* Add unit tests for the free space check
* Fix free space check - retrieve avaiable size in bytes
* Update default location for direct download
* Improve the method to retrieve hosts to retry on depending on the destination pool type and scope
* Verify location for temporary download exists before checking free space
* In progress - refactor and extension
* Refactor and fix
* Last fixes and marvin tests
* Remove unused test file
* Improve logging
* Change default path for direct download
* Fix upload certificate
* Fix ISO failure after retry
* Fix metalink filename mismatch error
* Fix iso direct download
* Fix for direct download ISOs on local storage and shared mount point
* Last fix iso
* Fix VM migration with ISO
* Refactor volume migration to remove secondary storage intermediate
* Fix simulator issue
This adds support for JDK11 in CloudStack 4.14+:
- Fixes code to build against JDK11
- Bump to Debian 9 systemvmtemplate with openjdk-11
- Fix Travis to run smoketests against openjdk-11
- Use maven provided jdk11 compatible mysql-connector-java
- Remove old agent init.d scripts
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Enable PVLAN support on L2 networks
* Fix prevent null pointer on details
* Add marvin tests
* Fixes from comments
* Fix: missing pvlan type on plugniccommand
* Fix checks on network creation for vlans overlap
* Fix remove prefix from secondary vlan id
* Improve checks on physical network for pvlans
* Fix compatibility with previous pvlan creation
* Fix shared networks backwards pvlan compatibility
* Add ui fix for pvlan type not passed to api
* Add check for isolated vlan id overlap
* Include check for dynamic vlan reserved for secondary vlan
* Fix marvin tests errors
* Fix redundant imports
* Skip marvin test for pvlan if dvswitch is not present
* spelling
Co-authored-by: Andrija Panic <45762285+andrijapanicsb@users.noreply.github.com>
The VM ingestion feature allows CloudStack to discover, on-board, import existing VMs in an infra. The feature currently works only for VMware, with a hypervisor agnostic framework which may be extended for KVM and XenServer in future.
* marvin: check resource count of more types
* New feature: add flag resource.count.running.vms.only to count resource consumption of only running vms
Stopped VMs do not use CPU/RAM actually.
A new global configuration resource.count.running.vms.only is added to determine whether resource (cpu/memory) of only running vms (including Starting/Stopping) will be taken into calculation of resource consumption.
* Add integration test for resource count of only running vms
Retrieval of an image store using ImageStoreProviderManager has been refactored by introducing three different methods,
DataStore getRandomImageStore(List<DataStore> imageStores);
To get an image store for reading purpose. Threshold capacity check will not be used here.
DataStore getImageStoreWithFreeCapacity(List<DataStore> imageStores);
To get an image store for reading purpose. Threshold capacity check will be used here and the store with max free space will be returned. If no store with filled storage less than the threshold is found, the NULL value will be returned.
List<DataStore> listImageStoresWithFreeCapacity(List<DataStore> imageStores);
To get a list of image stores for writing purpose which fulfills threshold capacity check.
Correspondingly DataStoreManager methods have been refactored to return similar values for a given zone.
Fixes#3287 - NULL value will be returned when secondary storage is needed for writing but there is not store with free space.
Fixes#3041 - Rather than returning random secondary storage for writing, storage with max. free space will be returned.
Fixes#3478 - For migration on VMware, all writable secondary storage will be mounted while preparation.
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
Feature Specification: https://cwiki.apache.org/confluence/pages/viewpage.action?pageId=95653548
Live storage migration on KVM under these conditions:
From source and destination hosts within the same cluster
From NFS primary storage to NFS cluster-wide primary storage
Source NFS and destination NFS storage mounted on hosts
In order to enable this functionality, database should be updated in order to enable live storage capacibilty for KVM, if previous conditions are met. This is due to existing conflicts between qemu and libvirt versions. This has been tested on CentOS 6 hosts.
Additional notes:
To use this feature set the storage_motion_supported=1 in the hypervisor_capability table for KVM. This is done by default as the feature may not work in some environments, read below.
This feature of online storage+VM migration for KVM will only work with CentOS6 and possible Ubuntu as KVM hosts but not with CentOS7 due to:
https://bugs.centos.org/view.php?id=14026https://bugzilla.redhat.com/show_bug.cgi?id=1219541
On CentOS7 the error we see is: " error: unable to execute QEMU command 'migrate': this feature or command is not currently supported" (reference https://ask.openstack.org/en/question/94186/live-migration-unable-to-execute-qemu-command-migrate/). Reading through various lists looks like the migrate feature with qemu may be available with paid versions of RHEL-EV but not centos7 however this works with CentOS6.
Fix for CentOS 7:
Create repo file on /etc/yum.repos.d/:
[qemu-kvm-rhev]
name=oVirt rebuilds of qemu-kvm-rhev
baseurl=http://resources.ovirt.org/pub/ovirt-3.5/rpm/el7Server/
mirrorlist=http://resources.ovirt.org/pub/yum-repo/mirrorlist-ovirt-3.5-el7Server
enabled=1
skip_if_unavailable=1
gpgcheck=0
yum install qemu-kvm-common-ev-2.3.0-29.1.el7.x86_64 qemu-kvm-ev-2.3.0-29.1.el7.x86_64 qemu-img-ev-2.3.0-29.1.el7.x86_64
Reboot host
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Problem: When a multi-disk OVA template is uploaded, only the root disk is recognized and VMs deployed using such template only get the root disk provisioned.
Root Cause: The template processor for multi-disk OVA was not used in the template upload processor.
Solution: Added support for local multi-disk OVA template upload. After a multi-disk OVA template is
uploaded, the mechanism that worked on multi-disk OVA templates registered using URL is now also used to discovers and creates data-disk templates in cloud.vm_template table and on the secondary storage.
To enable SSL on SSVMs :
• Upload the certificates like you usually do via the API or UI->Infrastructure tab
• Set the global settings secstorage.encrypt.copy, secstorage.ssl.cert.domain to appropriate values
along with the CPVM ones
• Restart management server (no need to destroy/restart SSVM (or the ssvm agent))
Test cases:
- Upload template and check it creates multi-disk folders on secondary
storage and entries in cloud.vm_template table
- Upload template and kill/shutdown management server. Then restart MS
to check if template sync works
- Copy template across zone of an uploaded template
Signed-off-by: Rohit Yadav rohit.yadav@shapeblue.com
