given is running out of capacity. If host id is specified the deployment should happen
on the given host and it should fail if the host is out of capacity. We are retrying
deployment on the entire zone without the given host id if we fail once. The retry,
which will retry on other hosts, should only be attempted if host id isn't given.
Also, introduces global setting
allow.deploy.vm.if.deploy.on.given.host.fails with which old behaviour
can be restored
- Switches Travis to use jdk1.8
- Changes java-version to 1.8
- Change jdk/maven version to 1.8
- Switch to F5/java8 compatible library release
- Switch packaging to use jdk 1.8, and jre 1.8 in init/systemd scripts
- Switch systemvm to openjdk-8-jre
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Bump spring-framework version to 4.x and Jetty to version that runs with JDK8
- Bump servet dependency version
- Migrate spring xmls to version 4, fixes schema locations that are 3.0
dependent in various xmls.
- Fix failing tests due to spring upgrade
(Thanks @marcaurele Marc-Aurèle Brothier for fixing them)
* Fix test DeploymentPlanningManagerImplTest
* Fix GloboDNS test
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This PR adds an ability to Pass a new parameter, locationType,
to the “createSnapshot” API command. Depending on the locationType,
we decide where the snapshot should go in case of managed storage.
There are two possible values for the locationType param
1) `Standard`: The standard operation for managed storage is to
keep the snapshot on the device. For non-managed storage, this will
be to upload it to secondary storage. This option will be the
default.
2) `Archive`: Applicable only to managed storage. This will
keep the snapshot on the secondary storage. For non-managed
storage, this will result in an error.
The reason for implementing this feature is to avoid a single
point of failure for primary storage. Right now in case of managed
storage, if the primary storage goes down, there is no easy way
to recover data as all snapshots are also stored on the primary.
This features allows us to mitigate that risk.
Adding support for cross-cluster storage migration for managed storage when using XenServerThis PR adds support for cross-cluster storage migration of VMs that make use of managed storage with XenServer.
Managed storage is when you have a 1:1 mapping between a virtual disk and a volume on a SAN (in the case of XenServer, an SR is placed on this SAN volume and a single virtual disk placed in the SR).
Managed storage allows features such as storage QoS and SAN-side snapshots to work (sort of analogous to VMware VVols).
This PR focuses on enabling VMs that are using managed storage to be migrated across XenServer clusters.
I have successfully run the following tests on this branch:
TestVolumes.py
TestSnapshots.py
TestVMSnapshots.py
TestAddRemoveHosts.py
TestVMMigrationWithStorage.py (which is a new test that is being added with this PR)
* pr/1671:
Adding support for cross-cluster storage migration for managed storage when using XenServer
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
Added checks to prevent netwrok update when router state is unknown or when
the new offering removes a service that is in use.
Added a new param forced to the updateNetwork API. The network will
undergo a forced update when this param is set to true.
CLOUDSTACK-8751 Clean network config like firewall rules etc, when network services are removed during network update.
Often, patch and security releases do not require schema migrations or
data migrations. However, if an empty upgrade class and associated
scripts are not defined, the upgrade process will break. With this
change, if a release does not have an upgrade, a noop DbUpgrade is added
to the upgrade path. This approach allows the upgrade to proceed and
for the database to properly reflect the installed version. This change
should make the release process simpler as RMs no longer need to
rememeber to create this boilerplate code when starting a new release.
Beginning with the 4.8.2.0 and 4.9.1.0 releases, the project will
formally adopt a four (4) position release number to properly accomodate
rekeases that contain only CVE fixes. The DatabaseUpgradeChecker and
Version classes made assumptions that they would always parse and
compare three (3) position version numbers. This change adds the
CloudStackVersion value object that supports both three (3) and four (4)
version numbers. It encapsulates version comparsion logic, as well as,
the rules to allow three (3) and four (4) to interoperate.
* Modifies DatabaseUpgradeChecker to handle derive an upgrade path for
a version that was not explicitly specified. It determines the
releases the first release before it with database migrations and uses
that list as the basis for the list for version being calculated. A
noop upgrade is then added to the list which causes no schema changes
or data migrations, but will update the database to the version.
* Adds unit tests for the upgrade path calculation logic in
DatabaseUpgradeChecker
* Removes dummy upgrade logic for the 4.8.2.0 introduced in previous
versions of this patch
* Introduces the CloudStackVersion value object which parses and
compares three (3) and four (4) position version numbers. This class
is intended to replace com.cloud.maint.Version.
* Adds the junit-dataprovider dependency -- allowing test data to be
concisely generated separately from the execution of a test case.
Used extensively in the CloudStackVersionTest.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CID-1338387: Deletion of method endPointSelector.selectHypervisorHostFollowing the discussions and analysis presented on PR #1056 create by @DaanHoogland
This PR is intended to push those changes that were discussed there regarding the of endPointSelector.selectHypervisorHost method.
* pr/1124:
Deletion of method endPointSelector.selectHypervisorHost
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Updated most dependencies to latest minor releases, EXCEPT:
- Gson 2.x
- Major spring framework version
- Servlet version
- Embedded jetty version
- Mockito version (beta)
- Mysql lib minor version upgrade (breaks mysql-ha plugin)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9130: Make RebootCommand similar to start/stop/migrate agent commands w.r.t. "execute in sequence" flag
RebootCommand now behaves in the same way as start/stop/migrate agent commands w.r.t. to sequential/parallel execution.
* pr/1200:
CLOUDSTACK-9130: Make RebootCommand similar to start/stop/migrate agent commands w.r.t. "execute in sequence" flag RebootCommand now behaves in the same way as start/stop/migrate agent commands w.r.t. to sequential/parallel execution.
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Fixed return type Void to void in DataMotionStrategy.The main changes are:
- Changing methods Void to void.
- Removal of the method Void copyAsync(DataObject srcData, DataObject
destData, AsyncCompletionCallback<CopyCommandResult> callback) that was
never used.
We noticed that methods form that class are using the return type Void
with capital V. This way that method has to return a null value at the
end.
Removed trim lines from XenServerStorageMotionStrategy.
The trim lines were removed from XenServerStorageMotionStrategy.
* pr/969:
Changed return of methods from DataMotionStrategy, Void to void
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
The main changes are:
• Changing methods “Void” to “void”.
• Removal of the method “Void copyAsync(DataObject srcData, DataObject
destData, AsyncCompletionCallback callback)” that was never used. We
noticed that methods form that class are using the return type Void with
capital V. This way that method has to return a null value at the end.
The S3 implementation is far from finished, this commit focusses on the bases.
- Upgrade AWS SDK to latest version.
- Rewrite S3 Template downloader.
- Rewrite S3Utils utility class.
- Improve addImageStoreS3 API command.
- Split various classes for convenience.
- Various minor improvements and code optimalisations.
A side effect of the new AWS SDK is that it, by default, uses the V4 signature. Therefore I added an option to specify the Signer, so it stays compatible with previous versions.
* pr/547:
CLOUDSTACK-8601. VMFS storage added as local storage can be re-added as shared storage. Fail addition of a VMFS shared storage pool in case it has already been added as local storage in CS.
Signed-off-by: Mike Tutkowski <mike.tutkowski@solidfire.com>
... of new volumes. Following changes are implemented 1. Disable or enable a pool with the
updateStoragePool api. A new 'enabled' parameter added for the same. 2. When a
pool is disabled the state of the pool is updated to 'Disabled' in the db. On
enabling it is updated back to 'Up'. Alert is raised when a pool is disabled or
enabled. 3. Updated other storage providers to also honour the disabled state.
4. A disabled pool is skipped by allocators for provisioing of new volumes. 5.
Since the allocators skip a disabled pool for provisioning of volumes, the
volumes are also not listed as a destination for volume migration.
FS: https://cwiki.apache.org/confluence/display/CLOUDSTACK/Disabling+Storage+Pool+for+Provisioning
This closes#257
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
