- Bump spring-framework version to 4.x and Jetty to version that runs with JDK8
- Bump servet dependency version
- Migrate spring xmls to version 4, fixes schema locations that are 3.0
dependent in various xmls.
- Fix failing tests due to spring upgrade
(Thanks @marcaurele Marc-Aurèle Brothier for fixing them)
* Fix test DeploymentPlanningManagerImplTest
* Fix GloboDNS test
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Made the changes to improve logging.CLOUSTACK-9465 Several log refactoring/improvement suggestions.
There are two scenarios of logging which needs refactoring/improvement:
Method invocation replaced by variable
This means that in the logging code, the method invocation is pre-defined as a variable. for simplicity, the method invocation should be replaced by the variable.
Delete variable which must be null
The variable in the logging code is null, there is no need to put the variable there.
* pr/1705:
Made the changes to improve logging.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
KVM hosts on shared storage failure was accepted by mgmt server with the
host state as Up, even though there was no primary/shared storage available on
it. This patch offers a quick fix by throwing an exception in the storage monitor
which connects storage pool on host. The failure is trapped by agent manager
that disconnects the agent without any investigation.
Based on Lab tests, KVM agent may take upto 2 minutes to attempt NFS mount when
the storage is inaccessible (firewalled, or shutdown) before returning back with
an error. It is safe to assume that this won't add pressure on mgmt server due to
several reconnection attempts, and KVM agent would retry reconnection every 2
minutes.
For such KVM hosts, where failure happens due to storage issues; they will be
briefly put in Alert state but will be mostly be in Connecting state during which
the KVM host attempts to mount/reconfigure NFS storage pool.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Adding support for cross-cluster storage migration for managed storage when using XenServerThis PR adds support for cross-cluster storage migration of VMs that make use of managed storage with XenServer.
Managed storage is when you have a 1:1 mapping between a virtual disk and a volume on a SAN (in the case of XenServer, an SR is placed on this SAN volume and a single virtual disk placed in the SR).
Managed storage allows features such as storage QoS and SAN-side snapshots to work (sort of analogous to VMware VVols).
This PR focuses on enabling VMs that are using managed storage to be migrated across XenServer clusters.
I have successfully run the following tests on this branch:
TestVolumes.py
TestSnapshots.py
TestVMSnapshots.py
TestAddRemoveHosts.py
TestVMMigrationWithStorage.py (which is a new test that is being added with this PR)
* pr/1671:
Adding support for cross-cluster storage migration for managed storage when using XenServer
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
Added checks to prevent netwrok update when router state is unknown or when
the new offering removes a service that is in use.
Added a new param forced to the updateNetwork API. The network will
undergo a forced update when this param is set to true.
CLOUDSTACK-8751 Clean network config like firewall rules etc, when network services are removed during network update.
Often, patch and security releases do not require schema migrations or
data migrations. However, if an empty upgrade class and associated
scripts are not defined, the upgrade process will break. With this
change, if a release does not have an upgrade, a noop DbUpgrade is added
to the upgrade path. This approach allows the upgrade to proceed and
for the database to properly reflect the installed version. This change
should make the release process simpler as RMs no longer need to
rememeber to create this boilerplate code when starting a new release.
Beginning with the 4.8.2.0 and 4.9.1.0 releases, the project will
formally adopt a four (4) position release number to properly accomodate
rekeases that contain only CVE fixes. The DatabaseUpgradeChecker and
Version classes made assumptions that they would always parse and
compare three (3) position version numbers. This change adds the
CloudStackVersion value object that supports both three (3) and four (4)
version numbers. It encapsulates version comparsion logic, as well as,
the rules to allow three (3) and four (4) to interoperate.
* Modifies DatabaseUpgradeChecker to handle derive an upgrade path for
a version that was not explicitly specified. It determines the
releases the first release before it with database migrations and uses
that list as the basis for the list for version being calculated. A
noop upgrade is then added to the list which causes no schema changes
or data migrations, but will update the database to the version.
* Adds unit tests for the upgrade path calculation logic in
DatabaseUpgradeChecker
* Removes dummy upgrade logic for the 4.8.2.0 introduced in previous
versions of this patch
* Introduces the CloudStackVersion value object which parses and
compares three (3) and four (4) position version numbers. This class
is intended to replace com.cloud.maint.Version.
* Adds the junit-dataprovider dependency -- allowing test data to be
concisely generated separately from the execution of a test case.
Used extensively in the CloudStackVersionTest.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9348: NioConnection improvementsReopened PR with squashed changes for a re-review and testing after https://github.com/apache/cloudstack/pull/1493 and sub-sequent PRs got reverted
* pr/1549:
CLOUDSTACK-9348: NioConnection improvements
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Taking fast and efficient volume snapshots with XenServer (and your storage provider)A XenServer storage repository (SR) and virtual disk image (VDI) each have UUIDs that are immutable.
This poses a problem for SAN snapshots, if you intend on mounting the underlying snapshot SR alongside the source SR (duplicate UUIDs).
VMware has a solution for this called re-signaturing (so, in other words, the snapshot UUIDs can be changed).
This PR only deals with the CloudStack side of things, but it works in concert with a new XenServer storage manager created by CloudOps (this storage manager enables re-signaturing of XenServer SR and VDI UUIDs).
I have written Marvin integration tests to go along with this, but cannot yet check those into the CloudStack repo as they rely on SolidFire hardware.
If anyone would like to see these integration tests, please let me know.
JIRA ticket: https://issues.apache.org/jira/browse/CLOUDSTACK-9281
Here's a video I made that shows this feature in action:
https://www.youtube.com/watch?v=YQ3pBeL-WaA&list=PLqOXKM0Bt13DFnQnwUx8ZtJzoyDV0Uuye&index=13
* pr/1403:
Faster logic to see if a cluster supports resigning
Support for backend snapshots with XenServer
Signed-off-by: Will Stevens <williamstevens@gmail.com>
- Unit test to demonstrate denial of service attack
The NioConnection uses blocking handlers for various events such as connect,
accept, read, write. In case a client connects NioServer (used by
agent mgr to service agents on port 8250) but fails to participate in SSL
handshake or just sits idle, this would block the main IO/selector loop in
NioConnection. Such a client could be either malicious or aggresive.
This unit test demonstrates such a malicious client that can perform a
denial-of-service attack on NioServer that blocks it to serve any other client.
- Use non-blocking SSL handshake
- Uses non-blocking socket config in NioClient and NioServer/NioConnection
- Scalable connectivity from agents and peer clustered-management server
- Removes blocking ssl handshake code with a non-blocking code
- Protects from denial-of-service issues that can degrade mgmt server responsiveness
due to an aggressive/malicious client
- Uses separate executor services for handling ssl handshakes
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This reverts commit 7ce0e10fbcd949375e43535aae168421ecdaa562, reversing
changes made to 29ba71f2db3a3b7dcdad3a7c1f83725cffd56261.
This was reverted because it seemed to be related to an issue
when doing a DeployDC, causing an `addHost` error.
Notify listeners when a host has been added to a cluster, is about to be removed from a cluster, or has been removed from a cluster
This PR addresses the following JIRA ticket:
https://issues.apache.org/jira/browse/CLOUDSTACK-8813
The problem is that there needs to be notifications sent when a host is added to, about to be removed from, and removed from a cluster.
Such notifications can be used for many purposes. For example, it can allow storage plug-ins to update ACLs on their storage systems. Also, it can allow us to clean up IQNs from ESXi hosts that are no longer needed.
* pr/816:
CLOUDSTACK-8813: Notify listeners when a host has been added to a cluster, is about to be removed from a cluster, or has been removed from a cluster
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Support access to a host’s out-of-band management interface (e.g. IPMI, iLO,
DRAC, etc.) to manage host power operations (on/off etc.) and querying current
power state in CloudStack.
Given the wide range of out-of-band management interfaces such as iLO and iDRA,
the service implementation allows for development of separate drivers as plugins.
This feature comes with a ipmitool based driver that uses the
ipmitool (http://linux.die.net/man/1/ipmitool) to communicate with any
out-of-band management interface that support IPMI 2.0.
This feature allows following common use-cases:
- Restarting stalled/failed hosts
- Powering off under-utilised hosts
- Powering on hosts for provisioning or to increase capacity
- Allowing system administrators to see the current power state of the host
For testing this feature `ipmisim` can be used:
https://pypi.python.org/pypi/ipmisim
FS:
https://cwiki.apache.org/confluence/display/CLOUDSTACK/Out-of-band+Management+for+CloudStack
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9348: Use non-blocking SSL handshake in NioConnection/Link- Uses non-blocking socket config in NioClient and NioServer/NioConnection
- Scalable connectivity from agents and peer clustered-management server
- Removes blocking ssl handshake code with a non-blocking code
- Protects from denial-of-service issues that can degrade mgmt server responsiveness
due to an aggressive/malicious client
- Uses separate executor services for handling connect/accept events
Changes are covered the NioTest so I did not write a new test, advise how we can improve this. Further, I tried to invest time on writing a benchmark test to reproduce a degraded server but could not write it deterministic-ally (sometimes fails/passes but not always). Review, CI testing and feedback requested /cc @swill @jburwell @DaanHoogland @wido @remibergsma @rafaelweingartner @GabrielBrascher
* pr/1493:
CLOUDSTACK-9348: Use non-blocking SSL handshake
CLOUDSTACK-9348: Unit test to demonstrate denial of service attack
Signed-off-by: Will Stevens <williamstevens@gmail.com>
- Uses non-blocking socket config in NioClient and NioServer/NioConnection
- Scalable connectivity from agents and peer clustered-management server
- Removes blocking ssl handshake code with a non-blocking code
- Protects from denial-of-service issues that can degrade mgmt server responsiveness
due to an aggressive/malicious client
- Uses separate executor services for handling ssl handshakes
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-8847: ListServiceOfferings is returning incompatible tagged offerings when called with VM idWhen calling listServiceOfferings with VM id as parameter. It is returning incompatible tagged offerings. It should only list all compatible tagged offerings. Compatible means the new service offering should contain all the tags of the existing service offering(Existing offering SUBSET of new offering). If that is the case It should list in the result and can be upgraded to that offering.
* pr/1321:
CLOUDSTACK-8847: ListServiceOfferings is returning incompatible tagged offerings when called with VM id
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9130: Make RebootCommand similar to start/stop/migrate agent commands w.r.t. "execute in sequence" flag
RebootCommand now behaves in the same way as start/stop/migrate agent commands w.r.t. to sequential/parallel execution.
* pr/1200:
CLOUDSTACK-9130: Make RebootCommand similar to start/stop/migrate agent commands w.r.t. "execute in sequence" flag RebootCommand now behaves in the same way as start/stop/migrate agent commands w.r.t. to sequential/parallel execution.
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9196: Fixing null pointer exception when vm meta data is synced on upgraded setuphttps://issues.apache.org/jira/browse/CLOUDSTACK-9196
NullPointerException can occur if XenServer reports non-existing VM in cloud DB.
* pr/1274:
CLOUDSTACK-9196: Fixing null pointer exception when vm meta data is synced on upgraded setup.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Removed unused variables from "NetworkStateListener" classWe removed the following variables from "com.cloud.network.NetworkStateListener"
. UsageEventDao _usageEventDao
. NetworkDao _networkDao
We changed the EventBus s_eventBus variable to private, the constructor not to use those variables and applied this change in classes com.cloud.network.IpAddressManagerImpl and org.apache.cloudstack.engine.orchestration.NetworkOrchestrator
* pr/1261:
Removed unused variables from class NetworkStateListener
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9185: [VMware DRS] VM sync failed with exception due to out-of-band changesSummary: The target "ClusteredVirtualMachineManagerImpl.HandlePowerStateReport" invoked during the VM power state sync is not found as HandlePowerStateReport was not implemented in ClusteredVirtualMachineManagerImpl and was private in VirtualMachineManagerImpl, which was resulting in InvocationTargetException. Changed HandlePowerStateReport() in VirtualMachineManagerImpl to protected.
* pr/1256:
CLOUDSTACK-9185: [VMware DRS] VM sync failed with exception due to out-of-band changes
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
