The Netris Plugin introduces Netris as a network service provider in CloudStack to be able to create and manage Virtual Private Clouds (VPCs) in CloudStack, being able to orchestrate the following network functionalities:
- Network segmentation with Netris-VXLAN isolation method
- Routing between "public" IP and network segments with an ACS ROUTED mode offering
- SourceNAT, DNAT, 1:1 NAT between "public" IP and network segments with an ACS NATTED mode offering
- Routing between VPC network segments (tiers in ACS nomenclature)
- Access Lists (ACLs) between VPC tiers and "public" network (TCP, UDP, ICMP) both as global egress rules and "public" IP specific ingress rules.
- ACLs between VPC network tiers (TCP, UDP, ICMP)
- External load balancing – between VPC network tiers and "public" IP
- Internal load balancing – between VPC network tiers
- CloudStack Virtual Router services (DHCP, DNS, UserData, Password Injection, etc…)
* Option to deploy a VM with existing volume/snapshot
* smoke test changes
check if the hypervisor is KVM
check if the primary storage's scope is ZONE wide
* skip all tests if the storage isn't Zone-Wide and the hypervisor isn't KVM
* support StorPool tags
add StorPool tags to a volume created from snapshot or to a volume which
will be attached as a ROOT to a new VM
* Add StorPool tags on the new ROOT volume
* Add the StorPool's tags when volume is created from a snapshot or a
volume is attached as a ROOT to a VM
* Addressed review
* Introducing Storage Access Groups to define the host and storage pool connections
In CloudStack, when a primary storage is added at the Zone or Cluster scope, it is by default connected to all hosts within that scope. This default behavior can be refined using storage access groups, which allow operators to control and limit which hosts can access specific storage pools.
Storage access groups can be assigned to hosts, clusters, pods, zones, and primary storage pools. When a storage access group is set on a cluster/pod/zone, all hosts within that scope inherit the group. Connectivity between a host and a storage pool is then governed by whether they share the same storage access group.
A storage pool with a storage access group will connect only to hosts that have the same storage access group. A storage pool without a storage access group will connect to all hosts, including those with or without a storage access group.
* Add & Remove PowerFlex/ScaleIO MDMs while preparing & unpreparing the storage SDC connections (instead of start & stop scini)
* Add/Remove MDM IP addresses during Host connection/disconnection to/from storage pool when powerflex.connect.on.demand is false
* unit test fixes
* Don't remove MDM IPs from SDC when any volumes mapped to SDC
* Don't remove MDM IPs when other pools of same ScaleIO/PowerFlex cluster are connected
* rebase fixes
* update changes, to not remove/disconnect MDMs on maintenance
* import fixes after rebase
* KVM incremental snapshot feature
* fix log
* fix merge issues
* fix creation of folder
* fix snapshot update
* Check for hypervisor type during parent search
* fix some small bugs
* fix tests
* Address reviews
* do not remove storPool snapshots
* add support for downloading diff snaps
* Add multiple zones support
* make copied snapshots have normal names
* address reviews
* Fix in progress
* continue fix
* Fix bulk delete
* change log to trace
* Start fix on multiple secondary storages for a single zone
* Fix multiple secondary storages for a single zone
* Fix tests
* fix log
* remove bitmaps when deleting snapshots
* minor fixes
* update sql to new file
* Fix merge issues
* Create new snap chain when changing configuration
* add verification
* Fix snapshot operation selector
* fix bitmap removal
* fix chain on different storages
* address reviews
* fix small issue
* fix test
---------
Co-authored-by: João Jandre <joao@scclouds.com.br>
* api,agent,server,engine-schema: scalability improvements
Following changes and improvements have been added:
- Improvements in handling of PingRoutingCommand
1. Added global config - `vm.sync.power.state.transitioning`, default value: true, to control syncing of power states for transitioning VMs. This can be set to false to prevent computation of transitioning state VMs.
2. Improved VirtualMachinePowerStateSync to allow power state sync for host VMs in a batch
3. Optimized scanning stalled VMs
- Added option to set worker threads for capacity calculation using config - `capacity.calculate.workers`
- Added caching framework based on Caffeine in-memory caching library, https://github.com/ben-manes/caffeine
- Added caching for account/use role API access with expiration after write can be configured using config - `dynamic.apichecker.cache.period`. If set to zero then there will be no caching. Default is 0.
- Added caching for account/use role API access with expiration after write set to 60 seconds.
- Added caching for some recurring DB retrievals
1. CapacityManager - listing service offerings - beneficial in host capacity calculation
2. LibvirtServerDiscoverer existing host for the cluster - beneficial for host joins
3. DownloadListener - hypervisors for zone - beneficial for host joins
5. VirtualMachineManagerImpl - VMs in progress- beneficial for processing stalled VMs during PingRoutingCommands
- Optimized MS list retrieval for agent connect
- Optimize finding ready systemvm template for zone
- Database retrieval optimisations - fix and refactor for cases where only IDs or counts are used mainly for hosts and other infra entities. Also similar cases for VMs and other entities related to host concerning background tasks
- Changes in agent-agentmanager connection with NIO client-server classes
1. Optimized the use of the executor service
2. Refactore Agent class to better handle connections.
3. Do SSL handshakes within worker threads
5. Added global configs to control the behaviour depending on the infra. SSL handshake could be a bottleneck during agent connections. Configs - `agent.ssl.handshake.min.workers` and `agent.ssl.handshake.max.workers` can be used to control number of new connections management server handles at a time. `agent.ssl.handshake.timeout` can be used to set number of seconds after which SSL handshake times out at MS end.
6. On agent side backoff and sslhandshake timeout can be controlled by agent properties. `backoff.seconds` and `ssl.handshake.timeout` properties can be used.
- Improvements in StatsCollection - minimize DB retrievals.
- Improvements in DeploymentPlanner allow for the retrieval of only desired host fields and fewer retrievals.
- Improvements in hosts connection for a storage pool. Added config - `storage.pool.host.connect.workers` to control the number of worker threads that can be used to connect hosts to a storage pool. Worker thread approach is followed currently only for NFS and ScaleIO pools.
- Minor improvements in resource limit calculations wrt DB retrievals
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
Co-authored-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
Co-authored-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* test1, domaindetails, capacitymanager fix
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* test2 - agent tests
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* capacitymanagertest fix
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* change
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* fix missing changes
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* address comments
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* revert marvin/setup.py
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* fix indent
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* use space in sql
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* address duplicate
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* update host logs
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* revert e36c6a5d07
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* fix npe in capacity calculation
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* move schema changes to 4.20.1 upgrade
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* build fix
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* address comments
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* fix build
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* add some more tests
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* checkstyle fix
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* remove unnecessary mocks
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* build fix
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* replace statics
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* engine/orchestration,utils: limit number of concurrent new agent
connections
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* refactor - remove unused
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* unregister closed connections, monitor & cleanup
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* add check for outdated vm filter in power sync
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* agent: synchronize sendRequest wait
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
---------
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
Co-authored-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* 4.20:
merge errors fixed
Restrict the migration of volumes attached to VMs in Starting state (#9725)
server, plugin: enhance storage stats for IOPS (#10034)
Introducing granular command timeouts global setting (#9659)
Improve logging to include more identifiable information (#9873)
Adds framework layer change to allow retrieving and storing IOPS stats for storage pools. Custom `PrimaryStoreDriver` can implement method - `getStorageIopsStats` for returning IOPS stats. Existing method `getUsedIops` can also be overridden by such plugins when only used IOPS is returned.
For testing purpose, implementation has been added for simulator hypervisor plugin to return capacity and used IOPS for a pool.
For local storage pool, implementation has been added using iostat to return currently used IOPS.
StoragePoolResponse class has been updated to return IOPS values which allows showing IOPS values in UI for different storage pool related views and APIs.
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* Improve logging to include more identifiable information for kvm plugin
* Update logging for scaleio plugin
* Improve logging to include more identifiable information for default volume storage plugin
* Improve logging to include more identifiable information for agent managers
* Improve logging to include more identifiable information for Listeners
* Replace ids with objects or uuids
* Improve logging to include more identifiable information for engine
* Improve logging to include more identifiable information for server
* Fixups in engine
* Improve logging to include more identifiable information for plugins
* Improve logging to include more identifiable information for Cmd classes
* Fix toString method for StorageFilterTO.java
This PR contains 3 features
- IPv4 Static Routing (Routed mode) #9346
Design document: https://cwiki.apache.org/confluence/pages/viewpage.action?pageId=306153967
- AS Numbers Management #9410
Design Document: https://cwiki.apache.org/confluence/display/CLOUDSTACK/BGP+AS+Numbers+Management
- Dynamic routing
Design Document: https://cwiki.apache.org/confluence/pages/viewpage.action?pageId=315492858
- Document: https://github.com/apache/cloudstack-documentation/pull/419
Rename nsx mode to routing mode
by
```
git grep -l nsx_mode |xargs sed -i "s/nsx_mode/routing_mode/g"
git grep -l nsxmode |xargs sed -i "s/nsxmode/routingmode/g"
git grep -l nsxMode |xargs sed -i "s/nsxMode/routingMode/g"
git grep -l NsxMode |xargs sed -i "s/NsxMode/RoutingMode/g"
```
- re-organize sql changes
- fix NPE as rules do not have public ip
- fix missing destination cidr in ingress rules
- disable network usage for routed network
- fix DB exception as network_id is -1 during network creation
- apply ingress/egress routing rules
- VR changes to configure nft rules for isolated network
- VR: setup nft rule for control network
- VR: flush all iptables rules
- fix NPE which is because ingress rules do not have public ip associated
- fix dest cidr is missing in nft tables
- add ip4 routing and ip4 routes to list network and list vpc response
- fix ingress rule is missing when vr is restarted
- fix icmp types in nft rules
- add tab to manage routing firewall rules
- fix ingress rules are not applied when VR is restarted
- add default rules in FORWARD chain
- fix create vpc offerings
- fix public ip is not assigned to vpc
- fix network offering is not listed when create vpc tier
- add is_routing to boot args of vpc vr
- remove table ip4_firewall in vpc vr
- release or remove subnet when remove a network
- implemenent fw_vpcrouter_routing
- fix wrong ip familty when flush ipv4 rules
- fix acl rules are not applied due to wrong version (should be 6 which means ip6 rules are removed)
- add default rules for vpc tiers so that tcp connections (e.g. ssh) work
- append policy rules after default rules
- remove /usr/local/cloud/systemvm/ in routers
- throw an exception when allocate subnet with cidrsize
- fix some TODOs
- add new parameters to update API
- return type Ipv4GuestSubnetNetworkMap when get or create subnet
- fix firewall rules are broken
- add domain_id and account_id to db
- add domain/account/project to ipv4 subnet response
- create ipv4 subnet for domain/account/project
- check conflict when update ipv4 subnet
- ui changes
- add parent subnet to response
- add list for ipv4 subnet
- implement some methods
- fix list subnets for guest networks by zoneid
- UI changes
- fix delete ipv4 subnet for network
- fix ipv4 subnet is set to zone guest network cidr if cidrsize is specified
- add zone info to response if parent subnet is null but network is not
- fix gateway/cidr is not set when create network with cidrsize
- fix order of nft rules in the VRs
* Routed v24
- add classes in marvin base.py
* Routed v25
- add test_01_subnet_zone
- fix dedicate to domain/account failure
- list subnets for network by keyword and subnet
* Routed v26: implement subnet auto-allocation
- add utils for split ip ranges into small subnets
- add utils to get start/end ip of a cidr
- implement subnet auto-generation
- add global settings
* Routed 27: add subnet for VPC
- add db column for vpc_id
- add db record for vpc
- remove db record when delete a vpc
- add checkConflicts methods
- remove duplicated settings
- check ipv4 cidr when create subnet
* Routed v28: update smoke tests
- update test_ipv4_routing.py
- search subnets by networkid
* Routed 29: fix vpc and add more tests
- fix createnetwork in vpc
- add vpc id/name to response
- fix zone id/name are not displayed in some cases
- add smoke test for vpc
- add smoke tests for failed cases
- add smoke test for connectivity checks
- marvin: add "-q" to ssh command
* Routed 31: ui and smoke tests
- UI: add link to network in list view
- add nftables rules check in VRs
* Routed 32: add chain OUTPUT and more rules
- fix the issue 80/443/8080 is not reachable from VR itself
```
2024-06-27 10:21:52,121 INFO Executing: systemctl start cloud-password-server@172.31.1.1
2024-06-27 10:21:52,128 INFO Service cloud-password-server@172.31.1.1 start
2024-06-27 10:21:52,129 INFO Executing: ps aux
2024-06-27 10:24:02,175 ERROR Failed to update password server due to: <urlopen error [Errno 110] Connection timed out>
```
* Routed: fix dns search from VMs in Isolated networks
* Routed: fix VPC dns issue due to gateway IP is missing in cloud.conf
This is caused by NSX integration, and fixed by
https://github.com/apache/cloudstack/pull/9102/
* Routed: rename routing_mode to network_mode
* Routed: replace centos5.5 template in smoke test as dhclient does not work in the vms
// this does not work
refer to https://dominikrys.com/posts/disable-udp-checksum-validation/#ignoring-udp-checksums-with-nftables
and
https://forum.openwrt.org/t/udp-checksum-with-nftables/161522/11
the vm should have checksum offloading disabled
* Routed: fix smoke test due to wrong cidrlist of egress rules and missing ingress rule from VR
* PR 9346: fix lint error schema-41910to42000.sql
* PR 9346: ui polish v1
* PR 9346: create VPC with cidrsize
* Routed: fix test failures with test_network_ipv6 and test_vpc_ipv6 due to 'ssh -q'
* Routed: fix /usr/local/cloud/systemvm/ are removed after SSVM/CPVM reboot
* Routed: fix IP of additional nics of VPC VR is not gateway
* PR 9346: fix cidrsize check when create VPC with cidrsize
* Routed: fix test/integration/smoke/test_ipv4_routing.py:279:16: E713 test for membership should be 'not in'
* PR9346: fix/Update api
* PR 9346: set response object name
* PR9346: UI refactor and small fixes
* PR9346: change return type of getNetworkMode
* PR9346: move IPv4 subnet to seperated tab
* PR9346: revert IpRangesTabGuest.vue back to original
* PR9346: fix remove ipv4 subnet on UI
* PR9346: fix test_ipv4_routing.py
* AS Number Range Management
* Create AS Number Range for a Zone
* Fix build
* Add ListASNRange and fix create ASN range
* Add List AS numbers
* Add UI for AS Numbers
* Fix UI and filter AS Numbers
* Add AS Number on Isolated network creation and refactor UI and response
* Release AS Number
* Add network offering new columns
* Add UI support to view and add AS number and configure network offering
* Automatically assign AS Number if not specify AS number
* update variable name
* Fix routing mode check
* UI: Only allow selecting AS number when routing mode is Dynamic and specifyAsNumber is true
* UI: Only pass AS number when supported by the network offering
* Release AS number on network deletion
* Add deleteASNRange command (#81)
* API: List ASNumbers by asnumber (#83)
---------
Co-authored-by: Pearl Dsilva <pearl1594@gmail.com>
* AS number management extensions
* Support AS number on VPC tier creation based on the offering
* Fix delete AS Range
* Fix UI values
* UI: Minor fix for releasing AS number
* UI: Move management of AS Range to Zone details view
* Fix specify_as_number column in network_offering table to set the default false
* Add events for AS number operations
* Allow users to list AS Numbers and fix network form for Normal users
* Add AS number details to list networks response
* Fix Allocated time format
* Fix Allocated time format
* support in details view too
* Fix: Do not release AS number if acquired network requires AS number
* Fix: Do not release AS number if acquired network requires AS number
* Fix typo
* Fix allocated release
* Fix event type
* UI: Add Routing mode and Specify AS to the network offering details
* UI: Add Routing mode and Specify AS to the network offering details
* Address comment
* Fix release AS number of network deletion
* Fix release AS number of network deletion
* Fix
* Restore release to its place based on the boolean
* Rename boolean
* API: Add networkId as listASNumber parameter
* Add Network name to the search view filter for AS numbers
* Present allocated time in human readable format - Pubilc IP / AS Numbers
* Add account / domain filter for AS numbers
* Add support for AS numbers on VPC offerings
* Refactor AS number allocation to VPC and non VPC isolated networks
* Checkstyle
* Add support for AS numbers on VPC offerings
* extend vpc offering view and vpcoffering response
* merge https://github.com/shapeblue/cloudstack-playtika/pull/115 and change network_id of as_numbers to include vpc_id
* Display AS number of VPC tiers as the AS number of the VPC
* extend asnumber response and ui support
* improve UI and as number response to view VPC details
* List only dynamic offerings for vpc tiers with specify as numbers
* Fix release AS number
* Fix AS number displayed as 0 when no AS number assigned
* Fix VPC offering creation without specify AS
---------
Co-authored-by: nvazquez <nicovazquez90@gmail.com>
* Fix release AS number on VPC deletion
* Update server/src/main/java/com/cloud/dc/BGPServiceImpl.java
* Update server/src/main/java/com/cloud/dc/BGPServiceImpl.java
* Fix missing column on asnumber table
* Fix listASNumbers API to support vpcid and obtain AS number from vpc for tiers
* Prevent listing 0 AS number for VPC
* Fix create Isolated Network form
* Update server/src/main/java/com/cloud/network/vpc/VpcManagerImpl.java
* Update server/src/main/java/com/cloud/network/vpc/VpcManagerImpl.java
* Dynamic: move routingmode/specifyasn after networkmode in AddNetworkOffering.vue on UI
* Dynamic: fix ip4routing in network response
* Dynamic/systemvm: add FRR to systemvm template
* Dynamic: BGP peers (DB,VO,Dao)
* Dynamic: BGP peers (VR/server)
* Dynamic: v3
- remove BgpPeer class
- fix vpc vr has bgp peers of only 1 tier
- rename ip4_cidr to guest_ip4_cidr
- rename ip6_cidr to guest_ip6_cidr
- generate /etc/frr/frr.conf
- apply BGP peers on Dynamic-Routed network even if there is no BGP peers
* Dynamic v4: fix vpc vr
- fix duplicated guest cidr in frr.conf in vpc vr
todo
- restart frr / reload frr (reload will cause bgp session to Policy state)
- apis for bgp peers
- assign/release bgp peer from/to network
* Dynamic v5: add apis for bgp peers
* Dynamic v6: fix bugs
- set response object name
- remove required as number when update
- fix checks when update
- allow regular users to list bgp peers
* Dynamic v7: move apis to bgp sub-dir
* Dynamic v8: add tab for manage BGP peers on UI
* Dynamic v9: fix update bgp with same config
* Dynamiv v10: add changeBgpPeersForNetworkCmd
* Dynamic v11: create network with bgppeerids
- create network with bgppeerids
- add marvin classes
- add smoke tests
- remove uuid from bgp_peer_network_map
- fix created/removed in bgp_peer_network_map
- remove bgppeers when remove a network
- UI: fix delete bgp peer
* Dynamic v12: add test for vpc tiers
* Dynamic v13: bug fixes
- fix change BGP peers for network in Allocated state
- fix listing network returns removed record
- fix all vpc tiers have the same settings
- remove BGP peers as part of network removal
- remove FRR settings for vpc tiers without any BGP peers
- UI: fix no error msg when change BGP peers
* Dynamic v14: assign BGP Peers for VPC instead of VPC tiers
- create vpc with bgppeerids
- do not allow create/update vpc tier with bgppeerids
- apply all bgp peers when create/delete a vpc tier
- UI: change bgp peers for vpc
- test: update tests on vpc
* Dynamic: fix build errors after merging as number PR
* Dynamic: fix TODOs
* Dynamic: fix smoke test on VPC
* Allow creation of networks by users with as numbers
* Address review comments
* Move BGPService to bgp package and inject it on BaseCmd
* Revert changes for CKS and address more comments
* Display left side menu option for AS number only for root admin
* Dynamic: create/update BGP peer with details
refer to https://docs.frrouting.org/en/latest/bgp.html
* Dynamic: fix build error and remove access to ListBgpPeers cmd for regular users
* Dynamic: assign all zone BGP peers to user networks
* Dynamic: show BGP peer info of networks only for root admin
* AS number: disable specifyasnumber for non-NSX offerings
* Dynamic: pass bgppeer details to command and fix typo with ip6 addr
* Dynamic: list BGP peers by isdedicated, and fix change bgppeers for network/vpc
* Dynamic: add UI labels
* Dynamic: add bgp peers to vpc response
* Dynamic: list bgp peers by keyword, fix list by asnumber
* Dynamic: fix list bgppeers by keyword and db schema
* Dynamic: fix list bgppeers do not return dedicated peers
* Dynamic: update UI when create network/vpc offering
* Update server/src/main/java/com/cloud/configuration/ConfigurationManagerImpl.java
Co-authored-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* Update tools/marvin/setup.py
* Dynamic: network mode must be same when update a network with new offering
* Dynamic: add method networkModel.isAnyServiceSupportedInNetwork
* Dynamic: rename APIs and classes
* Dynamic: fix unit tests due to previous changes
* Dynamic: validateNetworkCidrSize when auto-create subnet
* Dynamic: check AS number overlap
* Dynamic: add ActionEvent
* Dynamic: small code optimization
* Dynamic: fix ui bugs after api rename
* Dynamic: add marvin and test for ASN ranges and AS numbers
* Dynamic: add account setting use.system.bgp.peers
also
- change the default value of routed.ipv4.vpc.max.cidr.size and routed.ipv4.vpc.min.cidr.size
- change the category of settings
* static: fix ui error when delete zone ipv4 subnets
* static: small UI polish
* Dynamic: throw exception when as number is required but not passed
* Dynamic: fix typo when create FRR directory which causes network deletion failures
* Dynamic: connect to ALL (or ALL dedicated) BGP peers if no BGP peer mapping for the network/vpc
* Dynamic: throw exception when as number is required for VPC but not passed
* Dynamic: list bgp peers by useSystemBgpPeers
* Dynamic: fix frr config in VPC VR when change bgp peers
* Dynamic: create frr config even if there is no VPC tiers
* Dynamic: list bgp peers by zoneid (required for account) and account
* Dynamic: only apply FRR config for vpc tiers with dynamic routing
* Dynamic: donot send commands to router if commands size is 0
* Dynamic: fix 'new IPv6 address is not valid' when update bgp peer without IPv6
* Dynamic: throw exception if fail to allocate AS number when create network/vpc with dynamic routing
* Dynamic: enable ipv6 unicast and 'ip nht resolve-via-default'
* Dynamic: delete network/vpc if fail to allocate AS number when create network/vpc with dynamic routing
* test: add unit tests for ASN APIs
* test: add unit tests for core module
* test: add unit tests for API responses
* test: add unit tests for BgpPeerTO
* test: add minor changes
* test: add tests for create/delete/update/list RoutingFirewallRuleCmd
* Static: show ip4 routes for vpc tiers
* test: fix smoke test failure caused by type change of as number
* test: add test for Ipv4SubnetForZoneCmd
* test: add test for Ipv4SubnetForGuestNetworkCmd and BgpPeerCmd
* UI: do not show redundant router when network mode is ROUTED as RVR is not supported
* UI: hide 'Conserve mode' when networkmode is ROUTED
* test: add unit tests for ListASNumbersCmdTest
* Static: remove allocated IPv4 subnet when delete a network or vpc
* test: add unit tests for BgpPeersRules
* Dynamic: set ipv4routing from network offering
* server: list as numbers and ipv4 subnets by keyword
* server: remove dedicated bgp peers and ipv4 subnets when delete an account or domain
* server: fix dedicated ipv4 subnet is allocated to other accounts
* UI: fix allocated time format
* server: ignore project is projectid is -1 so bgppeers/ipv4subnets works in project view
* UI: add project column to bgp peers and ipv4 subnets
* server: fix list AS numbers by domain admin or normal user
* server: fix network creation when ipv4 subnet is dedicated
* UI: polish network.js
* Dynamic: fix frr config for ipv6 routing
* Static routing: support cks cluster
* Static: get/create IPv4 subnet from dedicated subnets at first
* Dynamic: add BGP peers tab
* Static: remove redundant loops
* api: add since to api and response
* server: add unit tests
---------
Co-authored-by: Nicolas Vazquez <nicovazquez90@gmail.com>
Co-authored-by: Pearl Dsilva <pearl1594@gmail.com>
Co-authored-by: Harikrishna Patnala <harikrishna.patnala@gmail.com>
Co-authored-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
Co-authored-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This feature adds support for Ceph's RADOS Gateway (RGW) support for the
Object Store feature of CloudStack.
The RGW of Ceph is Amazon S3 compliant and is therefor an easy and straigforward
implementation of basic S3 features.
Existing Ceph environments can have the RGW added as an additional feature to a
cluster already providing RBD (Block Device) to a CloudStack environment.
Introduce the BucketTO to pass to the drivers. This replaces just passing the bucket's name.
Some upcoming drivers require more information then just the bucket name to perform their actions,
for example they require the access and secret key which belong to the account of this bucket.
This is leftover code from a long time ago and this validation test has nu influence
on the end result on how a URL will be used afterwards.
We should support hosts pointing to an IPv6(-only) address out of the box.
For the code it does not matter if it's IPv4 or IPv6. This is the admin's choice.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Co-authored-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* New feature: Change storage pool scope
* Added checks for Ceph/RBD
* Update op_host_capacity table on primary storage scope change
* Storage pool scope change integration test
* pull 8875 : Addressed review comments
* Pull 8875: remove storage checks, AbstractPrimayStorageLifeCycleImpl class
* Pull 8875: Fixed integration test failure
* Pull 8875: Review comments
* Pull 8875: review comments + broke changeStoragePoolScope into smaller functions
* Added UT for changeStoragePoolScope
* Rename AbstractPrimaryDataStoreLifeCycleImpl to BasePrimaryDataStoreLifeCycleImpl
* Pull 8875: Dao review comments
* Pull 8875: Rename changeStoragePoolScope.vue to ChangeStoragePoolScope.vue
* Pull 8875: Created a new smokes test file + A single warning msg in ui
* Pull 8875: Added cleanup in test_primary_storage_scope.py
* Pull 8875: Type in en.json
* Pull 8875: cleanup array in test_primary_storage_scope.py
* Pull:8875 Removing extra whitespace at eof of StorageManagerImplTest
* Pull 8875: Added UT for PrimaryDataStoreHelper and BasePrimaryDataStoreLifeCycleImpl
* Pull 8875: Added license header
* Pull 8875: Fixed sql query for vmstates
* Pull 8875: Changed icon plus info on disabled mode in apidoc
* Pull 8875: Change scope should not work for local storage
* Pull 8875: Change scope completion event
* Pull 8875: Added api findAffectedVmsForStorageScopeChange
* Pull 8875: Added UT for findAffectedVmsForStorageScopeChange and removed listByPoolIdVMStatesNotInCluster
* Pull 8875: Review comments + Vm name in response
* Pull 8875: listByVmsNotInClusterUsingPool was returning duplicate VM entries because of multiple volumes in the VM satisfying the criteria
* Pull 8875: fixed listAffectedVmsForStorageScopeChange UT
* listAffectedVmsForStorageScopeChange should work if the pool is not disabled
* Fix listAffectedVmsForStorageScopeChangeTest UT
* Pull 8875: add volume.removed not null check in VmsNotInClusterUsingPool query
* Pull 8875: minor refactoring in changeStoragePoolScopeToCluster
* Update server/src/main/java/com/cloud/storage/StorageManagerImpl.java
* fix eof
* changeStoragePoolScopeToZone should connect pool to all Up hosts
Co-authored-by: Suresh Kumar Anaparti <sureshkumar.anaparti@gmail.com>
* Mitigation for non-scalable Powerflex/ScaleIO clients
- Added ScaleIOSDCManager to manage SDC connections, checks clients limit, prepare and unprepare SDC on the hosts.
- Added commands for prepare and unprepare storage clients to prepare/start and stop SDC service respectively on the hosts.
- Introduced config 'storage.pool.connected.clients.limit' at storage level for client limits, currently support for Powerflex only.
* tests issue fixed
* refactor / improvements
* lock with powerflex systemid while checking connections limit
* updated powerflex systemid lock to hold till sdc preparation
* Added custom stats support for storage pool, through listStoragePools API
* code improvements, and unit tests
* unit tests fixes
* Update config 'storage.pool.connected.clients.limit' to dynamic, and some improvements
* Stop SDC on host after migration if no volumes mapped to host
* Wait for SDC to connect after scini service start, and some log improvements
* Do not throw exception (log it) when SDC is not connected while revoking access for the powerflex volume
* some log improvements
This PR introduces the functionality of purging removed DB entries for CloudStack entities (currently only for VirtualMachine). There would be three mechanisms for purging removed resources:
Background task - CloudStack will run a background task which runs at a defined interval. Other parameters for this task can be controlled with new global settings.
API - New admin-only API purgeExpungedResources. It will allow passing the following parameters - resourcetype, batchsize, startdate, enddate. Currently, API is not supported in the UI.
Config for service offering. Service offerings can be created with purgeresources parameter which would allow purging resources immediately on expunge.
Following new global settings have been added:
expunged.resources.purge.enabled: Default: false. Whether to run a background task to purge the expunged resources
expunged.resources.purge.resources: Default: (empty). A comma-separated list of resource types that will be considered by the background task to purge the expunged resources. Currently only VirtualMachine is supported. An empty "value will result in considering all resource types for purging
expunged.resources.purge.interval: Default: 86400. Interval (in seconds) for the background task to purge the expunged resources
expunged.resources.purge.delay: Default: 300. Initial delay (in seconds) to start the background task to purge the expunged resources task.
expunged.resources.purge.batch.size: Default: 50. Batch size to be used during expunged resources purging.
expunged.resources.purge.start.time: Default: (empty). Start time to be used by the background task to purge the expunged resources. Use format yyyy-MM-dd or yyyy-MM-dd HH:mm:ss.
expunged.resources.purge.keep.past.days: Default: 30. The number of days in the past from the execution time of the background task to purge the expunged resources for which the expunged resources must not be purged. To enable purging expunged resource till the execution of the background task, set the value to zero.
expunged.resource.purge.job.delay: Default: 180. Delay (in seconds) to execute the purging of an expunged resource initiated by the configuration in the offering. Minimum value should be 180 seconds and if a lower value is set then the minimum value will be used.
Documentation PR: apache/cloudstack-documentation#397
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
Co-authored-by: Wei Zhou <weizhou@apache.org>
Co-authored-by: Suresh Kumar Anaparti <sureshkumar.anaparti@gmail.com>
* 4.19:
linstor: disconnect-disk also search for resource name in Linstor (#9035)
ui: add support to change Account role for admins (#9012)
Use parameter dcId as wrapper to prevent NPE (#8986)
* Allow overriding root diskoffering id & size while restoring VM
* UI changes
* Allow expunging of old disk while restoring a VM
* Resolve comments
* Address comments
* Duplicate volume's details while duplicating volume
* Allow setting IOPS for the new volume
* minor cleanup
* fixup
* Add checks for template size
* Replace strings for IOPS with constants
* Fix saveVolumeDetails method
* Fixup
* Fixup UI styling
