Cloudstack 9586: When using local storage with Xenserver prepareTemplate does not work with multiple primary storeThe race condition will happen whenever there are multiple primary storages and the CS tries to mount the secondary store to xenserver host simultaneously.
Due to synchronised block one mount will be successful and other thread will get the already mounted SR. Without the fix the two thread will try to mount it parallely and one will fail on Xenserver.
* pr/1765:
Cloudstack 9586: When using local storage with Xenserver prepareTemplate does not work with multiple primary store The race condition will happen whenever there are multiple primary storages and the CS tries to mount the secondary store to xenserver host simultaneously. Due to synchronised block one mount will be successful and other thread will get the already mounted SR. Without the fix the two thread will try to mount it parallely and one will fail on Xenserver.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9564: Fix memory leaks in VmwareContextPoolIn a recent management server crash, it was found that the largest contributor
to memory leak was in VmwareContextPool where a registry is held (arraylist)
that grows indefinitely. The list itself is not used anywhere or consumed. There
exists a hashmap (pool) that returns a list of contexts for existing poolkey
(address/username) that is used instead.
This fixes the issue by removing the arraylist registry, and limiting the
length of the context list for a given poolkey.
@blueorangutan package
* pr/1729:
CLOUDSTACK-9564: Fix memory leaks in VmwareContextPool
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
The race condition will happen whenever there are multiple primary storages and the CS tries to mount the secondary store to xenserver host simultaneously.
Due to synchronised block one mount will be successful and other thread will get the already mounted SR. Without the fix the two thread will try to mount it parallely and one will fail on Xenserver.
In a recent management server crash, it was found that the largest contributor
to memory leak was in VmwareContextPool where a registry is held (arraylist)
that grows indefinitely. The list itself is not used anywhere or consumed. There
exists a hashmap (pool) that returns a list of contexts for existing poolkey
(address/username) that is used instead.
This fixes the issue by removing the arraylist registry, and limiting the
length of the context list for a given poolkey.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9321 : Multiple Internal LB rules (more than one Internal LB rule with same source IP address) are not getting resolved in the corresponding InternalLbVm instance's haproxy.cfg fileMultiple Internal LB rules (more than one Internal LB rule with same source IP address) are not getting resolved in the corresponding InternalLbVm instance's haproxy.cfg file. Moreover, each time a new Internal LB rule is added to the corresponding InternalLbVm instance, it replaces the existing one. Thus, traffic corresponding to these un-resolved (old) Internal LB rules are getting dropped by the InternalLbVm instance.
PR contents:
1) Fix for this bug.
2) Marvin test coverage for Internal LB feature on master with native ACS setup (component directory) including validations for this bug fix.
3) Enhancements on our exiting Internal LB Marvin test code (nuagevsp plugins directory) to validate this bug fix.
4) PEP8 & PyFlakes compliance with the added Marvin test code.
* pr/1577:
CLOUDSTACK-9321 : Multiple Internal LB rules (more than one Internal LB rule with same source IP address) are not getting resolved in the corresponding InternalLbVm instance's haproxy.cfg file
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9402 : Support for underlay features (Source & Static NAT to underlay) in Nuage VSP pluginSupport for underlay features (Source & Static NAT to underlay) with Nuage VSP SDN Plugin including Marvin test coverage for corresponding Source & Static NAT features on master. Moreover, our Marvin tests are written in such a way that they can validate our supported feature set with both Nuage VSP SDN platform's overlay and underlay infra.
PR contents:
1) Support for Source NAT to underlay feature on master with Nuage VSP SDN Plugin.
2) Support for Static NAT to underlay feature on master with Nuage VSP SDN Plugin.
3) Marvin test coverage for Source & Static NAT to underlay on master with Nuage VSP SDN Plugin.
4) Enhancements on our exiting Marvin test code (nuagevsp plugins directory).
5) PEP8 & PyFlakes compliance with our Marvin test code.
* pr/1580:
CLOUDSTACK-9402 : Support for underlay features (Source & Static NAT to underlay) in Nuage VSP plugin
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9566 instance-id metadata for baremetal VM returns IDThere is difference in instance-id metadata across baremetal and other hypervisors.
On Baremetal
[root@ip-172-17-0-144 ~]# curl http://8.37.203.221/latest/meta-data/instance-id
6021
on Xen
[root@ip-172-17-2-103 ~]# curl http://172.17.0.252/latest/meta-data/instance-id
cbeb517a-e833-4a0c-b1e8-9ed70200fbbf
In both cases it should be vm's uuid.
* pr/1738:
CLOUDSTACK-9566 instance-id metadata for baremetal VM returns ID
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9402 : Marvin tests for Source NAT and Static NAT features verification with NuageVsp (both overlay and underlay infra).
Co-Authored-By: Prashanth Manthena <prashanth.manthena@nuagenetworks.net>, Frank Maximus <frank.maximus@nuagenetworks.net>
This commit adds a additional VirtIO channel with the name
'org.qemu.guest_agent.0' to all Instances.
With the Qemu Guest Agent the Hypervisor gains more control over the Instance if
these tools are present inside the Instance, for example:
* Power control
* Flushing filesystems
* Fetching Network information
In the future this should allow safer snapshots on KVM since we can instruct the
Instance to flush the filesystems prior to snapshotting the disk.
More information: http://wiki.qemu.org/Features/QAPI/GuestAgent
Keep in mind that on Ubuntu AppArmor still needs to be disabled since the default
AppArmor profile doesn't allow libvirt to write into /var/lib/libvirt/qemu
This commit does not add any communication methods through API-calls, it merely
adds the channel to the Instances and installs the Guest Agent in the SSVMs.
With the addition of the Qemu Guest Agent channel a second channel appears in /dev
on a SSVM as a VirtIO port.
The order in which the ports are defined in the XML matters for the naming inside
the SSVM VM and by not relying on /dev/vportXX but looking for a static name the
SSVM still boots properly if the order in the XML definition is changed.
A SSVM with both ports attached will have something like this:
root@v-215-VM:~# ls -l /dev/virtio-ports
total 0
lrwxrwxrwx 1 root root 11 May 13 21:41 org.qemu.guest_agent.0 -> ../vport0p2
lrwxrwxrwx 1 root root 11 May 13 21:41 v-215-VM.vport -> ../vport0p1
root@v-215-VM:~# ls -l /dev/vport*
crw------- 1 root root 251, 1 May 13 21:41 /dev/vport0p1
crw------- 1 root root 251, 2 May 13 21:41 /dev/vport0p2
root@v-215-VM:~#
In this case the SSVM port points to /dev/vport0p1, but if the order in the XML
is different it might point to /dev/vport0p2
By looking for a portname with a pre-defined pattern in /dev/virtio-ports we
do not rely on the order in the XML definition.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
CLOUDSTACK-9379: Support nested virtualization at VM level on VMware Hypervisor## Introduction
[JIRA TICKET](https://issues.apache.org/jira/browse/CLOUDSTACK-9379)
It is desired to support nested virtualization at VM level for VMware hypervisor. Current behaviour supports enabling/desabling global nested virtualization by modifying global config `'vmware.nested.virtualization'`. It is wished to improve this feature, having control at VM level instead of a global control only.
A new global configuration is added, to enable/disable VM nested virtualization control: `'vmware.nested.virtualization.perVM'`. Default value=false
After a vm deployment or start command, vm params include `'nestedVirtualizationFlag'` key and its value is:
- true -> nested virtualization enabled
- false -> nested virtualization disabled
**We will determinate nested virtualization enabled/disabled by examining this 3 values:**
- **(1)** global configuration `'vmware.nested.virtualization'` value
- **(2)** global configuration `'vmware.nested.virtualization.perVM'` value
- **(3)** `'nestedVirtualizationFlag'` value in `user_vm_details` if present, `null` if not.
Using this 3 values, there are different use cases:
- **(1)** = TRUE, **(2)** = TRUE, **(3)** is null -> _ENABLED_
- **(1)** = TRUE, **(2)** = TRUE, **(3)** = TRUE -> _ENABLED_
- **(1)** = TRUE, **(2)** = TRUE, **(3)** = FALSE -> _DISABLED_
- **(1)** = TRUE, **(2)** = FALSE, **(3)** indifferent -> _ENABLED_
- **(1)** = FALSE, **(2)** = TRUE, **(3)** is null -> _DISABLED_
- **(1)** = FALSE, **(2)** = TRUE, **(3)** = TRUE -> _ENABLED_
- **(1)** = FALSE, **(2)** = TRUE, **(3)** = FALSE -> _DISABLED_
- **(1)** = FALSE, **(2)** = FALSE, **(3)** indifferent -> _DISABLED_
* pr/1542:
CLOUDSTACK-9379: Support nested virtualization at VM level on VMware Hypervisor
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9491: incorrect parsing of device list to find ethernet index of plugged NICIn VmwareResource, findRouterEthDeviceIndex() method find ethernet interface index given
the mac address. This method is used, once a nic is plugged to determine ethernet interface.
"/proc/sys/net/ipv4/conf" from the VR and looped through the devices to find the right
ethernet interface. Howver current logic read it once, and loops through the device list.
Its observerd device may not show up '/proc/sys/net/ipv4/conf' immediatly once NIC is plugged
in the VM from vCenter.
Fix ensured, while waiting for 15 sec in the loop, read the latest content from /proc/sys/net/ipv4/conf
, so that right device list is processed.
Manual tested VPC scenarios of adding new tiers which uses findRouterEthDeviceIndex, to find the guest/public network ethernet index.
* pr/1681:
CLOUDSTACK-9491: incorrect parsing of device list to find ethernet index of plugged NIC
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9503: Increased the VR script timeout. Most of the changes are about converting int/long time values to joda Duration.
* pr/1745:
CLOUDSTACK-9503: Increased the VR script timeout. Most of the changes are about converting int/long time values to joda Duration.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9502: DS template copies dont get deleted in VMware ESXi with multiple clusters and zone wide storage (include CLOUDSTACK-9386 into 4.9 release branch)Include #1560 into 4.9 release branch
* pr/1676:
CLOUDSTACK-9502: DS template copies don’t get deleted in VMware ESXi with multiple clusters and zone wide storage
Signed-off-by: John Burwell <meaux@cockamamy.net>
* 4.9:
CLOUDSTACK-8830: Fix for vm snapshots in Vmware, could not create vm snapshot until 12 minutes after vm creation due to vCenter sent null name on snpashot recent task
CLOUDSTACK-8830 - [Vmware] VM snapshot fails for 12 min after instance creation (Targeted for 4.9)Continuing work by @maneesha-p in #798
This closes#798
* pr/1677:
CLOUDSTACK-8830: Fix for vm snapshots in Vmware, could not create vm snapshot until 12 minutes after vm creation due to vCenter sent null name on snpashot recent task
Signed-off-by: John Burwell <meaux@cockamamy.net>
Made the changes to improve logging.CLOUSTACK-9465 Several log refactoring/improvement suggestions.
There are two scenarios of logging which needs refactoring/improvement:
Method invocation replaced by variable
This means that in the logging code, the method invocation is pre-defined as a variable. for simplicity, the method invocation should be replaced by the variable.
Delete variable which must be null
The variable in the logging code is null, there is no need to put the variable there.
* pr/1705:
Made the changes to improve logging.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Support Backup of Snapshots for Managed Storage```
This PR adds an ability to Pass a new parameter, locationType,
to the createSnapshot API command. Depending on the locationType,
we decide where the snapshot should go in case of managed storage.
There are two possible values for the locationType param
1) `Primary`: The standard operation for managed storage is to
keep the snapshot on the device (primary). For non-managed storage, this will
give an error as this option is only supported for managed storage
2) `Secondary`: Applicable only to managed storage. This will
keep the snapshot on the secondary storage. For non-managed
storage, this will result in an error.
The reason for implementing this feature is to avoid a single
point of failure for primary storage. Right now in case of managed
storage, if the primary storage goes down, there is no easy way
to recover data as all snapshots are also stored on the primary.
This features allows us to mitigate that risk.
```
* pr/1600:
Support Backup of Snapshots for Managed Storage
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
This PR adds an ability to Pass a new parameter, locationType,
to the “createSnapshot” API command. Depending on the locationType,
we decide where the snapshot should go in case of managed storage.
There are two possible values for the locationType param
1) `Standard`: The standard operation for managed storage is to
keep the snapshot on the device. For non-managed storage, this will
be to upload it to secondary storage. This option will be the
default.
2) `Archive`: Applicable only to managed storage. This will
keep the snapshot on the secondary storage. For non-managed
storage, this will result in an error.
The reason for implementing this feature is to avoid a single
point of failure for primary storage. Right now in case of managed
storage, if the primary storage goes down, there is no easy way
to recover data as all snapshots are also stored on the primary.
This features allows us to mitigate that risk.
In VmwareResource, findRouterEthDeviceIndex() method find ethernet interface index given
the mac address. This method is used, once a nic is plugged to determine ethernet interface.
"/proc/sys/net/ipv4/conf" from the VR and looped through the devices to find the right
ethernet interface. However current logic read it once, and loops through the device list.
Its observerd device may not show up '/proc/sys/net/ipv4/conf' immediatly once NIC is plugged
in the VM from vCenter.Fix ensured, while waiting for 15 sec in the loop, read the latest
content from /proc/sys/net/ipv4/conf, so that right device list is processed.
CLOUDSTACK-9438: Fix for CLOUDSTACK-9252 - Make NFS version changeable in UIJIRA TICKET: https://issues.apache.org/jira/browse/CLOUDSTACK-9438
### Introduction
From #1361 it was possible to configure NFS version for secondary storage mount.
However, changing NFS version requires inserting an new detail on `image_store_details` table, with `name = 'nfs.version'` and `value = X` where X is desired NFS version, and then restarting management server for changes to take effect.
Our improvement aims to make NFS version changeable from UI, instead of previously described workflow.
### Proposed solution
Basically, NFS version is defined as an image store ConfigKey, this implied:
* Adding a new Config scope: **ImageStore**
* Make `ImageStoreDetailsDao` class to extend `ResourceDetailsDaoBase` and `ImageStoreDetailVO` implement `ResourceDetail`
* Insert `'display'` column on `image_store_details` table
* Extending `ListCfgsCmd` and `UpdateCfgCmd` to support **ImageStore** scope, which implied:
** Injecting `ImageStoreDetailsDao` and `ImageStoreDao` on `ConfigurationManagerImpl` class, on `cloud-server` module.
### Important
It is important to mention that `ImageStoreDaoImpl` and `ImageStoreDetailsDaoImpl` classes were moved from `cloud-engine-storage` to `cloud-engine-schema` module in order to Spring find those beans to inject on `ConfigurationManagerImpl` in `cloud-server` module.
We had this maven dependencies between modules:
* `cloud-server --> cloud-engine-schema`
* `cloud-engine-storage --> cloud-secondary-storage --> cloud-server`
As `ImageStoreDaoImpl` and `ImageStoreDetailsDao` were defined in `cloud-engine-storage`, and they needed in `cloud-server` module, to be injected on `ConfigurationManagerImpl`, if we added dependency from `cloud-server` to `cloud-engine-storage` we would introduce a dependency cycle. To avoid this cycle, we moved those classes to `cloud-engine-schema` module
* pr/1615:
CLOUDSTACK-9438: Fix for CLOUDSTACK-9252 - Make NFS version changeable in UI
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
By adding a Random Number Generator device to Instances we can prevent
entropy starvation inside guest.
The default source is /dev/random on the host, but this can be configured
to another source when present, for example a hardware RNG.
When enabled it will add the following to the Instance's XML definition:
<rng model='virtio'>
<rate period='1000' bytes='2048' />
<backend model='random'>/dev/random</backend>
</rng>
If the Instance has the proper support, which most modern distributions have,
it will have a /dev/hwrng device which it can use for gathering entropy.
More information: https://libvirt.org/formatdomain.html#elementsRng
