* vxlan: arp does not work between hosts as multicast group is communicated over physical nic instead of linux bridge
when linux bridge is setup (refer to http://docs.cloudstack.apache.org/projects/archived-cloudstack-getting-started/en/latest/networking/vxlan.html#configure-product-to-use-vxlan-plugin) and used as the kvm traffic label of physical networks, the vms on different hosts cannot reach each other.
(1) does not work:
```
/usr/share/cloudstack-common/scripts/vm/network/vnet/modifyvxlan.sh -v 1001 -p eth1 -b brvx-1001 -o add
```
"bridge fdb" shows
```
00:00:00:00:00:00 dev vxlan1001 dst 239.0.3.233 via eth1 self permanent
```
(2) this works:
```
/usr/share/cloudstack-common/scripts/vm/network/vnet/modifyvxlan.sh -v 1001 -p cloudbr1 -b brvx-1001 -o add
```
"bridge fdb" shows
```
00:00:00:00:00:00 dev vxlan1001 dst 239.0.3.233 via cloudbr1 self permanent
```
* vxlan: fix issue if kvm network label is not set
his PR fixes the problem of not updating the chain info or setting chain info to null after volume migrations.
Problem: While fetching the volume chain info, management server assumes datastore name to be a UUID (this is true only for NFS storages added by CloudStack) but datastore name can be with any name.
Solution: To fetch the volume chain info, use datastore name instead of UUID.
The fix is made in the flow of following API operations
migrateVirtualMachine
migrateVirtualMachineWithVolume
migrateVolume
* Fix of some UEFI related issues
1 - fix of attach/detach ISO of VM with UEFI boot type
2 - if OS type of an ISO is categorized as "Other" the bus type of the disk
will be set to "sata"
* Simplify the validation of OS types
This PR fixes the issue of missing fcd folder in local storage in case of VMware vSphere.
with this fix, a folder with name fcd is created whenever local storage is initiated.
* server: destroy ssvm, cpvm on last host maintenance
When a single or last UP host enters into maintenance just stopping SSVM and CPVM will leave behind VMs on hypervisor side. As these system vms will be recreated they can be destroyed.
Fixes#3719
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* fix methods
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* immediately destroy systemvms
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* fix destroy
Added bypassHostMaintenance flag in Comma.java class to allow command to be handled by host agent even when host is in maintenace.
Flag is set true only for delete commands for ssvm and cpvm.
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* unit test fix
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* fix missing return statement
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* fix
VM should be stopped with cleanup before calling expunge else it server may through error with host in PrepareForMaintenance state.
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* refactor
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* rename
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* refactor
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
Datastore cluster as a primary storage support is already there. But if any changes at vCenter to datastore cluster like addition/removal of datastore is not synchronised with CloudStack directly. It needs removal of primary storage from CloudStack and add it again to CloudStack.
Here synchronisation of datastore cluster is fixed without need to remove or add the datastore cluster.
1. A new API is introduced syncStoragePool which takes datastore cluster storage pool UUID as the parameter. This API checks if there any changes in the datastore cluster and updates management server accordingly.
2. During synchronisation if a new child datastore is found in datastore cluster, then management server will create a new child storage pool in database under the datastore cluster. If the new child storage pool is already added as an individual storage pool then the existing storage pool entry will be converted to child storage pool (instead of creating a new storage pool entry)
3. During synchronisaton if the existing child datastore in CloudStack is found to be removed on vCenter then management server removes that child datastore from datastore cluster and makes it an individual storage pool.
The above behaviour is on par with the vCenter behaviour when adding and removing child datastore.
Fixes: #4808, #4941
This PR adds a force flag to the attachIso / detachIso commands, especially for VMware where it is noticed that when trying to either detach an iso or attach an iso when there already exists another present it fails to do the necessary operation as from ACS end we either answer the question returned by Esxi for CDRom disconnect operation as No (for detach operation) or do not answer the question at all (for Attach operation).
Co-authored-by: Pearl Dsilva <pearl.dsilva@shapeblue.com>
* prevent other vm disks getting deleted
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* vmware: fix inter-cluster stopped vm migration
Fixes#4838
For inter-cluster migration without shared storage, VMware needs a host to be specified. Fix is to specify an appropriate host in the target cluster.
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* fix detached volume inter-cluster migration
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* cleanup unused method
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* review changes
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* changes
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* vmware: allow attached volume migration using VmwareStorageMotionStrategy
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* find vm clusterid with multiple ROOT volumes
VM can have multiple ROOT volumes and some can be on zone-wide store therefore iterate over all of them till a cluster ID is found.
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* fix successive storage migration
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* fix intercluster check
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* refactor vm cluster, host method
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* remove inter-pod check
Added by mistake, VMware won't have pods
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* address review comment
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
Fixes#4838
For inter-cluster migration without shared storage, VMware needs a host to be specified. Fix is to specify an appropriate host in the target cluster during a stopped VM migration. Also, find target datastore using the host in the target cluster.
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
Adds new/missing guest os mappings for XCP-ng/Xenserver 8.1
Copy guest OS mappings from XCP-ng/Xenserver 8.1 for XCP-ng/Xenserver 8.2
Adds Ubuntu 20.04 guest os mapping for XCP-ng/Xenserver 8.2
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
Fixes#4517
Adds capacity checks for RandomAllocator (host allocator)
Factors out host cpu capability and capacity check wrt serviceoffering code into CapacityManager.
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
This PR fixes the k8s test failures noticed on vmware.
Co-authored-by: Pearl Dsilva <pearl.dsilva@shapeblue.com>
Co-authored-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
This PR fixes a small bug when explicitly setting VM hardware versions lower than version 10.
Vmware expects the hardware version in format: vmx-DD where DD is a two-digit representation of the virtual hardware version. For hardware version lower than 10, CloudStack was not using to digits for the hardware version number, which ended up on an error while creating worker VMs. (vmx-8 for example instead of vmx-08)
This PR fixes#4244
deploying of VMs from ISOs and from templates with UEFI boot type
deploying of VMs from ISOs and from templates with UEFI boot type with
volumes in RAW format
Fixes#4729
As reported in the issue ACP 4.7 used a normal UUID in db for a presetup primary store on Xenserver.
Later the value has been changed to store's path with '/' removed.
Current changes try to retrieve SR's name-lable from store's path if UUID doesn't match path field for a pre-setup store.
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
This PR fixes the issue pertaining to volume resize on VMWare for deploy as-is templates. VMware deploy as-is templates are those that are deployed as per the specification in the imported OVF. Hence override root disk size will not be adhered to for such templates. Moreover, when we deploy VMs in stopped state and resize the volume, the root disk doesn't get resized but the volume size is merely updated in the DB.
This PR also includes the following (for deploy as-is templates):
- Disables overriding root disk size during VM deployment on the UI
- Disables selection of compute offerings with root disk size specified, at the time of deployment
- Provided users with the option to deploy VM is stopped state via UI (so as to give an option to users to resize the volumes before starting the VM)
Co-authored-by: Pearl Dsilva <pearl.dsilva@shapeblue.com>
While finding pools for volume migration list following compatible storages:
- all zone-wide storages of the same hypervisor.
- when the volume is attached to a VM, then all storages from the same cluster as that of VM.
- for detached volume, all storages that belong to clusters of the same hypervisor.
Fixes#4692Fixes#4400
These changes are related to PR #3194, but include suspending/resuming the VM when doing a VM snapshot as well, when deleting a VM snapshot, as it is performing the same operations via Libvirt. Also, there was an issue with the UI/localization changes in the prior PR, as that PR was altering the Volume snapshot behavior, but was altering the VM snapshot wording. Both have been altered in this PR.
Issuing this in response to the work happening in PR #4029.
In previous cloudstack versions, qcow2 image does not have a backing file format.
however, it is required in newer qemu versions, for example qemu 4.2 on ubuntu 20.04.
steps to reproduce the issue
(1) install cloudstack 4.14 or previous version, and ubuntu 19.04 or 18.04/16.04 LTS.
(2) create vms.
(3) upgrade to 4.15, upgrade os to ubuntu 20.04 , or install a new server with ubuntu 20.04.
(4) migrate vm from old ubuntu version to ubuntu 20.04, failed with exception below
```
2021-02-04 13:43:07,397 DEBUG [resource.wrapper.LibvirtMigrateCommandWrapper] (agentRequest-Handler-1:null) (logid:93da9385) ExecutionException : org.libvirt.LibvirtException: Requested operation is not valid: format of backing image '/mnt/03b6f487-9eaf-38bf-ad2d-d985423b832f/66990fcc-fd98-4932-9649-989bf6583d59' of image '/mnt/03b6f487-9eaf-38bf-ad2d-d985423b832f/a3dd1f0f-2557-4e07-951c-e4eb7b3f38b2' was not specified in the image metadata (See https://libvirt.org/kbase/backing_chains.html for troubleshooting)
```
(5)stop vm, and start it on ubuntu 20.04 server. failed with exception below
```
2021-02-04 13:46:29,766 WARN [resource.wrapper.LibvirtStartCommandWrapper] (agentRequest-Handler-5:null) (logid:b54745a7) LibvirtException
org.libvirt.LibvirtException: Requested operation is not valid: format of backing image '/mnt/03b6f487-9eaf-38bf-ad2d-d985423b832f/66990fcc-fd98-4932-9649-989bf6583d59' of image '/mnt/03b6f487-9eaf-38bf-ad2d-d985423b832f/a3dd1f0f-2557-4e07-951c-e4eb7b3f38b2' was not specified in the image metadata (See https://libvirt.org/kbase/backing_chains.html for troubleshooting)
```
To make testing easier, step 1 and 2 can be replaced by
```
qemu-img create -f qcow2 -b <backing file> <qcow2 image>
```
so qcow2 image does not have a backing file format.
* 4.14:
server: select root disk based on user input during vm import (#4591)
kvm: Use Q35 chipset for UEFI x86_64 (#4576)
server: fix wrong error message when create isolated network without SourceNat (#4624)
server: add possibility to scale vm to current customer offerings (#4622)
server: keep networks order and ips while move a vm with multiple networks (#4602)
server: throw exception when update vm nic on L2 network (#4625)
doc: fix typo in install notes (#4633)
Add RBD main storage through UI, it will fail when there is no host port parameter;
Because when we created the pool, we did not add the port target in the xml
