From 9f4444c9e41ab5dbd6e2603533b9a47af759bbd3 Mon Sep 17 00:00:00 2001 From: Rohit Yadav Date: Mon, 11 Mar 2013 14:10:44 +0530 Subject: [PATCH] appliance: Add veewee definition for 64bit systemvm template Signed-off-by: Rohit Yadav --- .../definitions/systemvmtemplate64/base.sh | 25 ++ .../definitions/systemvmtemplate64/cleanup.sh | 21 ++ .../systemvmtemplate64/definition.rb | 45 +++ .../systemvmtemplate64/postinstall.sh | 220 +++++++++++ .../systemvmtemplate64/preseed.cfg | 357 ++++++++++++++++++ .../systemvmtemplate64/zerodisk.sh | 15 + 6 files changed, 683 insertions(+) create mode 100644 tools/appliance/definitions/systemvmtemplate64/base.sh create mode 100644 tools/appliance/definitions/systemvmtemplate64/cleanup.sh create mode 100644 tools/appliance/definitions/systemvmtemplate64/definition.rb create mode 100644 tools/appliance/definitions/systemvmtemplate64/postinstall.sh create mode 100644 tools/appliance/definitions/systemvmtemplate64/preseed.cfg create mode 100644 tools/appliance/definitions/systemvmtemplate64/zerodisk.sh diff --git a/tools/appliance/definitions/systemvmtemplate64/base.sh b/tools/appliance/definitions/systemvmtemplate64/base.sh new file mode 100644 index 00000000000..d6faea04b41 --- /dev/null +++ b/tools/appliance/definitions/systemvmtemplate64/base.sh @@ -0,0 +1,25 @@ +# Update the box +apt-get -y update +#apt-get -y install linux-headers-$(uname -r) build-essential +#apt-get -y install zlib1g-dev libssl-dev libreadline-gplv2-dev +apt-get -y install curl unzip + +# Set up sudo +echo 'vagrant ALL=NOPASSWD:ALL' > /etc/sudoers.d/vagrant + +# Tweak sshd to prevent DNS resolution (speed up logins) +echo 'UseDNS no' >> /etc/ssh/sshd_config + +# Remove 5s grub timeout to speed up booting +cat < /etc/default/grub +# If you change this file, run 'update-grub' afterwards to update +# /boot/grub/grub.cfg. + +GRUB_DEFAULT=0 +GRUB_TIMEOUT=0 +GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` +GRUB_CMDLINE_LINUX_DEFAULT="quiet" +GRUB_CMDLINE_LINUX="debian-installer=en_US" +EOF + +update-grub diff --git a/tools/appliance/definitions/systemvmtemplate64/cleanup.sh b/tools/appliance/definitions/systemvmtemplate64/cleanup.sh new file mode 100644 index 00000000000..9e98ab03531 --- /dev/null +++ b/tools/appliance/definitions/systemvmtemplate64/cleanup.sh @@ -0,0 +1,21 @@ +# Clean up +#apt-get -y remove linux-headers-$(uname -r) build-essential +apt-get -y remove dictionaries-common busybox +apt-get -y autoremove +apt-get autoclean +apt-get clean + +# Removing leftover leases and persistent rules +echo "cleaning up dhcp leases" +rm /var/lib/dhcp/* + +# Make sure Udev doesn't block our network +echo "cleaning up udev rules" +rm /etc/udev/rules.d/70-persistent-net.rules +mkdir /etc/udev/rules.d/70-persistent-net.rules +rm -rf /dev/.udev/ +rm /lib/udev/rules.d/75-persistent-net-generator.rules + +echo "Adding a 2 sec delay to the interface up, to make the dhclient happy" +echo "pre-up sleep 2" >> /etc/network/interfaces + diff --git a/tools/appliance/definitions/systemvmtemplate64/definition.rb b/tools/appliance/definitions/systemvmtemplate64/definition.rb new file mode 100644 index 00000000000..35ef878d35a --- /dev/null +++ b/tools/appliance/definitions/systemvmtemplate64/definition.rb @@ -0,0 +1,45 @@ +Veewee::Definition.declare({ + :cpu_count => '1', + :memory_size=> '256', + :disk_size => '2000', :disk_format => 'VDI', :hostiocache => 'off', + :os_type_id => 'Debian_64', + :iso_file => "debian-wheezy-DI-rc1-amd64-netinst.iso", + :iso_src => "http://cdimage.debian.org/cdimage/wheezy_di_rc1/amd64/iso-cd/debian-wheezy-DI-rc1-amd64-netinst.iso", + :iso_md5 => "412f77d4b98adf2a7d575745fd282d78", + :iso_download_timeout => "1000", + :boot_wait => "10", :boot_cmd_sequence => [ + '', + 'install ', + 'preseed/url=http://%IP%:%PORT%/preseed.cfg ', + 'debian-installer=en_US ', + 'auto ', + 'locale=en_US ', + 'kbd-chooser/method=us ', + 'netcfg/get_hostname=systemvm ', + 'netcfg/get_domain=apache.org ', + 'fb=false ', + 'debconf/frontend=noninteractive ', + 'console-setup/ask_detect=false ', + 'console-keymaps-at/keymap=us ', + 'keyboard-configuration/xkb-keymap=us ', + '' + ], + :kickstart_port => "7122", + :kickstart_timeout => "10000", + :kickstart_file => "preseed.cfg", + :ssh_login_timeout => "10000", + :ssh_user => "root", + :ssh_password => "password", + :ssh_key => "", + :ssh_host_port => "7222", + :ssh_guest_port => "22", + :sudo_cmd => "echo '%p'|sudo -S sh '%f'", + :shutdown_cmd => "halt -p", + :postinstall_files => [ + "base.sh", + "postinstall.sh", + "cleanup.sh", + "zerodisk.sh" + ], + :postinstall_timeout => "10000" +}) diff --git a/tools/appliance/definitions/systemvmtemplate64/postinstall.sh b/tools/appliance/definitions/systemvmtemplate64/postinstall.sh new file mode 100644 index 00000000000..8e745eb1ba9 --- /dev/null +++ b/tools/appliance/definitions/systemvmtemplate64/postinstall.sh @@ -0,0 +1,220 @@ +# Licensed to the Apache Software Foundation (ASF) under one +# or more contributor license agreements. See the NOTICE file +# distributed with this work for additional information +# regarding copyright ownership. The ASF licenses this file +# to you under the Apache License, Version 2.0 (the +# "License"); you may not use this file except in compliance +# with the License. You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, +# software distributed under the License is distributed on an +# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY +# KIND, either express or implied. See the License for the +# specific language governing permissions and limitations +# under the License. + +set -x + +ROOTPW=password +HOSTNAME=systemvm +CLOUDSTACK_RELEASE=4.2.0 + +install_packages() { + DEBIAN_FRONTEND=noninteractive + DEBIAN_PRIORITY=critical + + # Basic packages + apt-get --no-install-recommends -q -y --force-yes install rsyslog logrotate cron chkconfig insserv net-tools ifupdown vim-tiny netbase iptables + apt-get --no-install-recommends -q -y --force-yes install openssh-server openssl e2fsprogs dhcp3-client tcpdump socat wget + # apt-get --no-install-recommends -q -y --force-yes install grub-legacy + apt-get --no-install-recommends -q -y --force-yes install python bzip2 sed gawk diffutils grep gzip less tar telnet ftp rsync traceroute psmisc lsof procps monit inetutils-ping iputils-arping httping + apt-get --no-install-recommends -q -y --force-yes install dnsutils zip unzip ethtool uuid file iproute acpid virt-what sudo + + # sysstat + echo 'sysstat sysstat/enable boolean true' | debconf-set-selections + apt-get --no-install-recommends -q -y --force-yes install sysstat + # apache + apt-get --no-install-recommends -q -y --force-yes install apache2 ssl-cert + # haproxy + apt-get --no-install-recommends -q -y --force-yes install haproxy + # dnsmasq + apt-get --no-install-recommends -q -y --force-yes install dnsmasq + # nfs client + apt-get --no-install-recommends -q -y --force-yes install nfs-common + + # vpn stuff + apt-get --no-install-recommends -q -y --force-yes install xl2tpd bcrelay ppp ipsec-tools tdb-tools + echo "openswan openswan/install_x509_certificate boolean false" | debconf-set-selections + echo "openswan openswan/install_x509_certificate seen true" | debconf-set-selections + apt-get --no-install-recommends -q -y --force-yes install openswan + + # vmware tools + apt-get --no-install-recommends -q -y --force-yes install open-vm-tools + # xenstore utils + apt-get --no-install-recommends -q -y --force-yes install xenstore-utils libxenstore3.0 + # keepalived and conntrackd for redundant router + apt-get --no-install-recommends -q -y --force-yes install keepalived conntrackd ipvsadm libnetfilter-conntrack3 libnl1 + # ipcalc + apt-get --no-install-recommends -q -y --force-yes install ipcalc + # java + apt-get --no-install-recommends -q -y --force-yes install default-jre-headless + + echo "iptables-persistent iptables-persistent/autosave_v4 boolean true" | debconf-set-selections + echo "iptables-persistent iptables-persistent/autosave_v6 boolean true" | debconf-set-selections + apt-get --no-install-recommends -q -y --force-yes install iptables-persistent +} + +setup_accounts() { + # Setup sudo to allow no-password sudo for "admin" + groupadd -r admin + # Create a 'cloud' user if it's not there + id cloud + if [[ $? -ne 0 ]] + then + useradd -G admin cloud + else + usermod -a -G admin cloud + fi + echo "root:$ROOTPW" | chpasswd + echo "cloud:`openssl rand -base64 32`" | chpasswd + sed -i -e '/Defaults\s\+env_reset/a Defaults\texempt_group=admin' /etc/sudoers + sed -i -e 's/%admin ALL=(ALL) ALL/%admin ALL=NOPASSWD:ALL/g' /etc/sudoers + # Disable password based authentication via ssh, this will take effect on next reboot + sed -i -e 's/^.*PasswordAuthentication .*$/PasswordAuthentication no/g' /etc/ssh/sshd_config + # Secure ~/.ssh + mkdir -p /home/cloud/.ssh + chmod 700 /home/cloud/.ssh +} + +fix_nameserver() { + # Replace /etc/resolv.conf also + cat > /etc/resolv.conf << EOF +nameserver 8.8.8.8 +nameserver 4.4.4.4 +EOF +} + +fix_inittab() { + # Fix inittab + cat >> /etc/inittab << EOF + +vc:2345:respawn:/sbin/getty 38400 hvc0 +EOF +} + +fix_acpid() { + # Fix acpid + mkdir -p /etc/acpi/events + cat >> /etc/acpi/events/power << EOF +event=button/power.* +action=/usr/local/sbin/power.sh "%e" +EOF + cat >> /usr/local/sbin/power.sh << EOF +#!/bin/bash +/sbin/poweroff +EOF + chmod a+x /usr/local/sbin/power.sh +} + +fix_hostname() { + # Fix hostname in openssh-server generated keys + sed -i "s/root@\(.*\)$/root@$HOSTNAME/g" /etc/ssh/ssh_host_*.pub + # Fix hostname to override one provided by dhcp during vm build + echo "$HOSTNAME" > /etc/hostname + hostname $HOSTNAME + # Delete entry in /etc/hosts derived from dhcp + sed -i '/127.0.1.1/d' /etc/hosts +} + +fix_locale() { + cat >> /etc/default/locale << EOF +LANG=en_US.UTF-8 +LC_ALL=en_US.UTF-8 +EOF + cat >> /etc/locale.gen << EOF +en_US.UTF-8 UTF-8 +EOF + + locale-gen en_US.UTF-8 +} + +do_fixes() { + fix_nameserver + fix_inittab + fix_acpid + fix_hostname + fix_locale +} + +configure_apache2() { + # Enable ssl, rewrite and auth + a2enmod ssl rewrite auth_basic auth_digest + a2ensite default-ssl + # Backup stock apache configuration since we may modify it in Secondary Storage VM + cp /etc/apache2/sites-available/default /etc/apache2/sites-available/default.orig + cp /etc/apache2/sites-available/default-ssl /etc/apache2/sites-available/default-ssl.orig +} + +configure_services() { + mkdir -p /var/www/html + mkdir -p /opt/cloud/bin + mkdir -p /var/cache/cloud + mkdir -p /usr/share/cloud + mkdir -p /usr/local/cloud + mkdir -p /root/.ssh + # Fix haproxy directory issue + mkdir -p /var/lib/haproxy + + # Get config files from master + snapshot_url="https://git-wip-us.apache.org/repos/asf?p=incubator-cloudstack.git;a=snapshot;h=HEAD;sf=tgz" + snapshot_dir="/opt/incubator-cloudstack*" + cd /opt + wget $snapshot_url -O cloudstack.tar.gz + tar -zxvf cloudstack.tar.gz + cp -rv $snapshot_dir/patches/systemvm/debian/config/* / + cp -rv $snapshot_dir/patches/systemvm/debian/vpn/* / + mkdir -p /usr/share/cloud/ + cd $snapshot_dir/patches/systemvm/debian/config + tar -cvf /usr/share/cloud/cloud-scripts.tar * + cd $snapshot_dir/patches/systemvm/debian/vpn + tar -rvf /usr/share/cloud/cloud-scripts.tar * + cd /opt + rm -fr $snapshot_dir cloudstack.tar.gz + + chkconfig --add cloud-early-config + chkconfig cloud-early-config on + chkconfig --add cloud-passwd-srvr + chkconfig cloud-passwd-srvr off + chkconfig --add cloud + chkconfig cloud off + chkconfig monit off + chkconfig xl2tpd off +} + +do_signature() { + mkdir -p /var/cache/cloud/ + gzip -c /usr/share/cloud/cloud-scripts.tar > /usr/share/cloud/cloud-scripts.tgz + md5sum /usr/share/cloud/cloud-scripts.tgz | awk '{print $1}' > /var/cache/cloud/cloud-scripts-signature + echo "Cloudstack Release $CLOUDSTACK_RELEASE $(date)" > /etc/cloudstack-release +} + +begin=$(date +%s) + +echo "*************INSTALLING PACKAGES********************" +install_packages +echo "*************DONE INSTALLING PACKAGES********************" +setup_accounts +echo "*************DONE ACCOUNT SETUP********************" +configure_services +configure_apache2 +echo "*************DONE SETTING UP SERVICES********************" +do_fixes +echo "*************DONE FIXING CONFIGURATION********************" +do_signature + +fin=$(date +%s) +t=$((fin-begin)) + +echo "Signed systemvm build, finished building systemvm appliance in $t seconds" diff --git a/tools/appliance/definitions/systemvmtemplate64/preseed.cfg b/tools/appliance/definitions/systemvmtemplate64/preseed.cfg new file mode 100644 index 00000000000..ac9edd31213 --- /dev/null +++ b/tools/appliance/definitions/systemvmtemplate64/preseed.cfg @@ -0,0 +1,357 @@ +#### Contents of the preconfiguration file (for squeeze) +### Localization +# Locale sets language and country. +d-i debian-installer/locale string en_US + +# Keyboard selection. +#d-i console-tools/archs select at +d-i console-keymaps-at/keymap select us +# Example for a different keyboard architecture +#d-i console-keymaps-usb/keymap select mac-usb-us + +### Network configuration +# netcfg will choose an interface that has link if possible. This makes it +# skip displaying a list if there is more than one interface. +d-i netcfg/choose_interface select auto + +# To pick a particular interface instead: +#d-i netcfg/choose_interface select eth1 + +# If you have a slow dhcp server and the installer times out waiting for +# it, this might be useful. +#d-i netcfg/dhcp_timeout string 60 + +# If you prefer to configure the network manually, uncomment this line and +# the static network configuration below. +#d-i netcfg/disable_dhcp boolean true + +# If you want the preconfiguration file to work on systems both with and +# without a dhcp server, uncomment these lines and the static network +# configuration below. +#d-i netcfg/dhcp_failed note +#d-i netcfg/dhcp_options select Configure network manually + +# Static network configuration. +#d-i netcfg/get_nameservers string 192.168.1.1 +#d-i netcfg/get_ipaddress string 192.168.1.42 +#d-i netcfg/get_netmask string 255.255.255.0 +#d-i netcfg/get_gateway string 192.168.1.1 +#d-i netcfg/confirm_static boolean true + +# Any hostname and domain names assigned from dhcp take precedence over +# values set here. However, setting the values still prevents the questions +# from being shown, even if values come from dhcp. +d-i netcfg/get_hostname string systemvm +d-i netcfg/get_domain string cloudstack.org + +# Disable that annoying WEP key dialog. +d-i netcfg/wireless_wep string +# The wacky dhcp hostname that some ISPs use as a password of sorts. +#d-i netcfg/dhcp_hostname string radish + +# If non-free firmware is needed for the network or other hardware, you can +# configure the installer to always try to load it, without prompting. Or +# change to false to disable asking. +#d-i hw-detect/load_firmware boolean true + +### Network console +# Use the following settings if you wish to make use of the network-console +# component for remote installation over SSH. This only makes sense if you +# intend to perform the remainder of the installation manually. +#d-i anna/choose_modules string network-console +#d-i network-console/password password r00tme +#d-i network-console/password-again password r00tme + +### Mirror settings +# If you select ftp, the mirror/country string does not need to be set. +#d-i mirror/protocol string ftp +d-i mirror/country string manual +d-i mirror/http/hostname string http.us.debian.org +d-i mirror/http/directory string /debian +d-i mirror/http/proxy string + +# Suite to install. +#d-i mirror/suite string testing +# Suite to use for loading installer components (optional). +#d-i mirror/udeb/suite string testing + +### Clock and time zone setup +# Controls whether or not the hardware clock is set to UTC. +d-i clock-setup/utc boolean true + +# You may set this to any valid setting for $TZ; see the contents of +# /usr/share/zoneinfo/ for valid values. +d-i time/zone string UTC + +# Controls whether to use NTP to set the clock during the install +d-i clock-setup/ntp boolean true +# NTP server to use. The default is almost always fine here. +#d-i clock-setup/ntp-server string ntp.example.com + +### Partitioning +# If the system has free space you can choose to only partition that space. +#d-i partman-auto/init_automatically_partition select biggest_free + +# Alternatively, you can specify a disk to partition. The device name must +# be given in traditional non-devfs format. +# Note: A disk must be specified, unless the system has only one disk. +# For example, to use the first SCSI/SATA hard disk: +d-i partman-auto/disk string /dev/sda +# In addition, you'll need to specify the method to use. +# The presently available methods are: "regular", "lvm" and "crypto" +d-i partman-auto/method string regular + +# If one of the disks that are going to be automatically partitioned +# contains an old LVM configuration, the user will normally receive a +# warning. This can be preseeded away... +#d-i partman-lvm/device_remove_lvm boolean true +# The same applies to pre-existing software RAID array: +#d-i partman-md/device_remove_md boolean true + +# And the same goes for the confirmation to write the lvm partitions. +#d-i partman-lvm/confirm boolean true +#d-i partman-lvm/confirm_nooverwrite boolean true + +#d-i partman/choose_partition select finish +#d-i partman-auto-lvm/guided_size string max + +# You can choose one of the three predefined partitioning recipes: +# - atomic: all files in one partition +# - home: separate /home partition +# - multi: separate /home, /usr, /var, and /tmp partitions +d-i partman-auto/choose_recipe select atomic +#d-i partman/default_filesystem string ext3 + +# Or provide a recipe of your own... +# The recipe format is documented in the file devel/partman-auto-recipe.txt. +# If you have a way to get a recipe file into the d-i environment, you can +# just point at it. +#d-i partman-auto/expert_recipe_file string /hd-media/recipe + +d-i partman-auto/expert_recipe string \ + boot-root :: \ + 40 50 100 ext4 \ + $primary{ } $bootable{ } \ + method{ format } format{ } \ + use_filesystem{ } filesystem{ ext4 } \ + mountpoint{ /boot } \ + . \ + 400 40 500 ext4 \ + method{ format } format{ } \ + use_filesystem{ } filesystem{ ext4 } \ + mountpoint{ / } \ + . \ + 60 100 200 ext4 \ + method{ format } format{ } \ + use_filesystem{ } filesystem{ ext4 } \ + mountpoint{ /home } \ + . \ + 500 30 1000 ext4 \ + method{ format } format{ } \ + use_filesystem{ } filesystem{ ext4 } \ + mountpoint{ /usr } \ + . \ + 400 40 500 ext4 \ + method{ format } format{ } \ + use_filesystem{ } filesystem{ ext4 } \ + mountpoint{ /opt } \ + . \ + 500 60 1000 ext4 \ + method{ format } format{ } \ + use_filesystem{ } filesystem{ ext4 } \ + mountpoint{ /var } \ + . \ + 100 70 400 ext4 \ + method{ format } format{ } \ + use_filesystem{ } filesystem{ ext4 } \ + mountpoint{ /tmp } \ + . \ + 64 512 300% linux-swap \ + method{ swap } format{ } \ + . + +# If not, you can put an entire recipe into the preconfiguration file in one +# (logical) line. This example creates a small /boot partition, suitable +# swap, and uses the rest of the space for the root partition: +#d-i partman-auto/expert_recipe string \ +# boot-root :: \ +# 40 50 100 ext3 \ +# $primary{ } $bootable{ } \ +# method{ format } format{ } \ +# use_filesystem{ } filesystem{ ext3 } \ +# mountpoint{ /boot } \ +# . \ +# 500 10000 1000000000 ext3 \ +# method{ format } format{ } \ +# use_filesystem{ } filesystem{ ext3 } \ +# mountpoint{ / } \ +# . \ +# 64 512 300% linux-swap \ +# method{ swap } format{ } \ +# . + +#The preseed line that "selects finish" needs to be in a certain order in your preseed, the example-preseed does not follow this. +#http://ubuntuforums.org/archive/index.php/t-1504045.html + +# This makes partman automatically partition without confirmation, provided +# that you told it what to do using one of the methods above. +#d-i partman-partitioning/confirm_write_new_label boolean true +d-i partman/confirm_write_new_label boolean true +d-i partman/choose_partition select finish +d-i partman/confirm boolean true +d-i partman/confirm_nooverwrite boolean true + +### Base system installation +# Select the initramfs generator used to generate the initrd for 2.6 kernels. +#d-i base-installer/kernel/linux/initramfs-generators string yaird + +# The kernel image (meta) package to be installed; "none" can be used if no +# kernel is to be installed. +#d-i base-installer/kernel/image string linux-image-2.6-486 + +### Account setup +# Skip creation of a root account (normal user account will be able to +# use sudo). +d-i passwd/root-login boolean true +# Alternatively, to skip creation of a normal user account. +#d-i passwd/make-user boolean false + +# Root password, either in clear text +d-i passwd/root-password password password +d-i passwd/root-password-again password password +# or encrypted using an MD5 hash. +#d-i passwd/root-password-crypted password [MD5 hash] + +# To create a normal user account. +d-i passwd/user-fullname string Cloud Stack +d-i passwd/username string cloud +# Normal user's password, either in clear text +d-i passwd/user-password password cloud +d-i passwd/user-password-again password cloud +# or encrypted using an MD5 hash. +#d-i passwd/user-password-crypted password [MD5 hash] +# Create the first user with the specified UID instead of the default. +#d-i passwd/user-uid string 1010 +d-i user-setup/encrypt-home boolean false +d-i user-setup/allow-password-weak boolean true + +# The user account will be added to some standard initial groups. To +# override that, use this. +d-i passwd/user-default-groups string audio cdrom video admin + +### Apt setup +# You can choose to install non-free and contrib software. +#d-i apt-setup/non-free boolean true +#d-i apt-setup/contrib boolean true +# Uncomment this if you don't want to use a network mirror. +#d-i apt-setup/use_mirror boolean false +# Select which update services to use; define the mirrors to be used. +# Values shown below are the normal defaults. +#d-i apt-setup/services-select multiselect security, volatile +#d-i apt-setup/security_host string security.debian.org +#d-i apt-setup/volatile_host string volatile.debian.org + + +# By default the installer requires that repositories be authenticated +# using a known gpg key. This setting can be used to disable that +# authentication. Warning: Insecure, not recommended. +#d-i debian-installer/allow_unauthenticated string true + +### Package selection +tasksel tasksel/first multiselect ssh-server +# If the desktop task is selected, install the kde and xfce desktops +# instead of the default gnome desktop. +#tasksel tasksel/desktop multiselect kde, xfce + +# Individual additional packages to install +d-i pkgsel/include string openssh-server ntp acpid sudo bzip2 + +# Whether to upgrade packages after debootstrap. +# Allowed values: none, safe-upgrade, full-upgrade +d-i pkgsel/upgrade select none + +# Some versions of the installer can report back on what software you have +# installed, and what software you use. The default is not to report back, +# but sending reports helps the project determine what software is most +# popular and include it on CDs. +popularity-contest popularity-contest/participate boolean false + +### Boot loader installation +# Grub is the default boot loader (for x86). If you want lilo installed +# instead, uncomment this: +#d-i grub-installer/skip boolean true +# To also skip installing lilo, and install no bootloader, uncomment this +# too: +#d-i lilo-installer/skip boolean true + +# This is fairly safe to set, it makes grub install automatically to the MBR +# if no other operating system is detected on the machine. +d-i grub-installer/only_debian boolean true + +# This one makes grub-installer install to the MBR if it also finds some other +# OS, which is less safe as it might not be able to boot that other OS. +#d-i grub-installer/with_other_os boolean true + +# Alternatively, if you want to install to a location other than the mbr, +# uncomment and edit these lines: +#d-i grub-installer/only_debian boolean false +#d-i grub-installer/with_other_os boolean false +#d-i grub-installer/bootdev string (hd0,0) +# To install grub to multiple disks: +#d-i grub-installer/bootdev string (hd0,0) (hd1,0) (hd2,0) + +# Optional password for grub, either in clear text +#d-i grub-installer/password password r00tme +#d-i grub-installer/password-again password r00tme +# or encrypted using an MD5 hash, see grub-md5-crypt(8). +#d-i grub-installer/password-crypted password [MD5 hash] + +### Finishing up the installation +# During installations from serial console, the regular virtual consoles +# (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next +# line to prevent this. +#d-i finish-install/keep-consoles boolean true + +# Avoid that last message about the install being complete. +d-i finish-install/reboot_in_progress note + +# This will prevent the installer from ejecting the CD during the reboot, +# which is useful in some situations. +#d-i cdrom-detect/eject boolean false + +# This is how to make the installer shutdown when finished, but not +# reboot into the installed system. +#d-i debian-installer/exit/halt boolean true +# This will power off the machine instead of just halting it. +#d-i debian-installer/exit/poweroff boolean true + +### Preseeding other packages +# Depending on what software you choose to install, or if things go wrong +# during the installation process, it's possible that other questions may +# be asked. You can preseed those too, of course. To get a list of every +# possible question that could be asked during an install, do an +# installation, and then run these commands: +# debconf-get-selections --installer > file +# debconf-get-selections >> file + + +#### Advanced options +### Running custom commands during the installation +# d-i preseeding is inherently not secure. Nothing in the installer checks +# for attempts at buffer overflows or other exploits of the values of a +# preconfiguration file like this one. Only use preconfiguration files from +# trusted locations! To drive that home, and because it's generally useful, +# here's a way to run any shell command you'd like inside the installer, +# automatically. + +# This first command is run as early as possible, just after +# preseeding is read. +# Prevent packaged version of VirtualBox Guest Additions being installed: +d-i preseed/early_command string sed -i \ + '/in-target/idiscover(){/sbin/discover|grep -v VirtualBox;}' \ + /usr/lib/pre-pkgsel.d/20install-hwpackages + +# This command is run just before the install finishes, but when there is +# still a usable /target directory. You can chroot to /target and use it +# directly, or use the apt-install and in-target commands to easily install +# packages and run commands in the target system. diff --git a/tools/appliance/definitions/systemvmtemplate64/zerodisk.sh b/tools/appliance/definitions/systemvmtemplate64/zerodisk.sh new file mode 100644 index 00000000000..25bd8c4af2d --- /dev/null +++ b/tools/appliance/definitions/systemvmtemplate64/zerodisk.sh @@ -0,0 +1,15 @@ +# Clean up stuff copied in by veewee +rm -fv /root/*.iso +rm -fv /root/base.sh /root/cleanup.sh /root/postinstall.sh /root/zerodisk.sh +rm -fv .veewee_version .veewee_params .vbox_version + +echo "Cleaning up" + +# Zero out the free space to save space in the final image: +for path in / /boot /usr /var /opt /tmp +do + dd if=/dev/zero of=$path/zero bs=1M + sync + rm -f $path/zero + echo "Completed zero-ing out disk on $path" +done